1.2m3 Electric Bottom Feed Vibroflot 300kN 6 Bar Ground Improvement Equipment

Product Description:

Vibroflot Compaction is a widely-used deep compaction technique for granular soils, usually with less than 10-15% silt present. This technique is used to improve land that has been reclaimed. Compaction occurs under the influence of simultaneous vibration and saturation – this causes loose sand and gravel particles to pack more closely together, as well as to increase lateral confining pressure within the soilmass.

The Vibroflot is usually suspended from a standard crawler crane or a piling rig.

Features:

• Product Name: Electrical Vibroflot
• Centrifugal force: 200-300kN
• Working pile diameter: 900-1200mm
• Electrical control mode: Inverter Drive
• Frequency: 40-60Hz
• Hopper capacity: 1.2m3
• Electric Vibration Excavator
• Electric Vibration Pile Driver
• Electrical Vibration Hammer

Applications:

Apie's Electric Vibration Pile Driver (also known as an Electric Vibration Hammer) is an essential machine for a wide range of construction projects. It is specially designed for efficient and safe electrical vibration pile driving, and is widely used in civil, geotechnical and other engineering applications. It is made in China by Apie, and is available with a minimum order quantity of 1 set. It is packaged securely in wooden boxes for safe delivery. It can normally be delivered within 20 days after payment is received via T/T.

The Electric Vibration Hammer has a working pile diameter range of 900-1200mm, and its electrical control mode is Inverter Drive. It has an air flow rate of 10m3/min, and its cooling mode is through circulating water cooling. The centrifugal force it can generate is up to 200-300kN.

Customization:

Support and Services:

We provide comprehensive technical support and services for Electrical Vibroflot. Our team of experienced technicians are always available to answer any questions you may have about the product and provide assistance in troubleshooting any issues you may be having. We also offer regular maintenance services to ensure the best possible performance of your equipment.

We provide a variety of support options, such as on-site assistance, remote support, phone and online support, and more. We understand the importance of keeping your Electrical Vibroflot running smoothly and are dedicated to providing you with the best possible service.

If you have any questions or need assistance with your Electrical Vibroflot, please don't hesitate to contact us. We look forward to helping you get the most out of your equipment.

Packing and Shipping:

The Electrical Vibroflot can be safely and effectively packaged and shipped using the following steps:

1. The Electrical Vibroflot must be securely attached to a pallet or other sturdy base.
2. Surround the Electrical Vibroflot with at least two inches of bubble wrap or similar protective material.
3. Securely tape the bubble wrap in place.
4. Wrap the Electrical Vibroflot with stretch wrap to provide additional protection.
5. Attach a label to the package with the recipient's address and a return address.
6. Ensure that the package is properly sealed and ready for transport.
7. Deliver the package to a shipping service of your choice.

FAQ:

Q1: What is the brand name of Electrical Vibroflot?

A1: The brand name of Electrical Vibroflot is APIE.

Q2: Where is Electrical Vibroflot from?

A2: Electrical Vibroflot comes from China.

Q3: What is the minimum order quantity of Electrical Vibroflot?

A3: The minimum order quantity of Electrical Vibroflot is one set.

Q4: What kind of packaging does Electrical Vibroflot have?

A4: Electrical Vibroflot is packaged in Wooden.

Q5: How long is the delivery time of Electrical Vibroflot?

A5: The delivery time of Electrical Vibroflot is about 20 days.

Q6: What are the payment terms for Electrical Vibroflot?

A6: The payment terms for Electrical Vibroflot are T/T.