MOORE AUTOMATION LIMITED
| Payment Terms | T/T |
| Supply Ability | 10 pieces a day |
| Delivery Time | today |
| Packaging Details | new and original with factory sealed |
| Manufacture Year | 2020 |
| Con 6DS1311-8AEtrol System | FICO 4552144 |
| Application | Nuclear Power Plant |
| lead time | in stock |
| description | ASM |
| Weight | 4lbs |
| Brand Name | ASM |
| Model Number | FICO 4552144 |
| Certification | CO.CQ |
| Place of Origin | USA |
View Detail Information
Explore similar products
BRAND NEW TAIYO PARKER PQC-CU-02 PRESS FIT QUALITY CONTROL SYSTEM PRE-CON
SANYO 67ZA030J5A8B00 Servo Amplifier
KRAUSSMAFFEI SR505 5080056 Flow Control Plc Modules
ProSoft Technology MVI46-ADMNET Programmable Application Development*High
Product Specification
| Payment Terms | T/T | Supply Ability | 10 pieces a day |
| Delivery Time | today | Packaging Details | new and original with factory sealed |
| Manufacture Year | 2020 | Con 6DS1311-8AEtrol System | FICO 4552144 |
| Application | Nuclear Power Plant | lead time | in stock |
| description | ASM | Weight | 4lbs |
| Brand Name | ASM | Model Number | FICO 4552144 |
| Certification | CO.CQ | Place of Origin | USA |
| High Light | mitsubishi motion controller ， b&r touch screen | ||
ASM FICO 4552144 Output Card
| Brand/Manufacturer | ASM/USA |
| Part Number | FICO 4552144 |
| Alternate Part Number | FICO 4552144 |
| Description | Output Card |
| Dimennsions | 16.5cm x 8.4 cm x 4.0 cm |
| Weight | 0.33kg |
Product Details
Swagelok compression fittings are standard. Polished 300-series stainless steel tubing should
be used to insure a leak-tight system. Insert tubing into the fitting all the way to the shoulder.
Check that ferrules are oriented as required. Tighten nut finger-tight, then while holding the
fitting body steady with a backup- wrench, tighten the nut 1-1/4 turns. For more detail see
Swagelok catalog C-1072. For other types of fittings available on special order, use
appropriate standard practice or consult manufacturer.
The following conditions should be considered to optimise system efficiency :
1. Operate the LVC at minimum back pressure. The lower the vaporizer pressure the higher the concentration.
2. Size bubbler for system.
3. Minimize plumbing pressure drops and dead volume by using correct tubing size. Use short plumbing
runs where possible.
4. Prevent vapor condensation in system by proper plumbing temperatures (i.e. plumbing temperatures
equal or greater than bubbler).
5. Most source materials when combined with air (which contains moisture) will form acid and a residue.
Therefore, proper purging procedures must be followed to avoid system contamination during installation
or removal.
6. Use check valve on outlet side of LVC to prevent liquid backing into line. Use a low cracking pressure
type check valve (1/3-2 psi).
7. Since vaporizing will tend to decrease bubbler temperature, care should be taken to minimize this effect
since concentration will decrease.
8. Use HI-Purity materials for minimum contamination.
More Products
| EMERSON | KJ1501X1-BA2 | AB | 1747-L541 |
| EMERSON | KJ1501X1-BB1 | AB | 1747-BA |
| EMERSON | KJ1501X1-BC1 | AB | 1756-L62 |
| EMERSON | KJ1501X1-BC2 | AB | 1756-BA1 |
| EMERSON | KJ1501X1-BC3 | AB | 1746-P2 |
| EMERSON | KJ1501X1-BK1 | AB | 1756-TBNH |
| EMERSON | KJ1502X1-BA2 | ABB | SDCS-IOB-21 3BSE005176R1 |
| FOXBORO | FBM203 P0914SV | ABB | SDCS-PIN-48 3BSE004939R0002 |
| FOXBORO | FBM206 | ABB | 3N2632 |
| FOXBORO | FBM207C | ABB | 1N1346 |
| FOXBORO | FBM211 | ABB | SD821 3BSC610037R1 |
| FOXBORO | FBM214 | ABB | SPFEC12 |
Contact Us
miya@mvme.cn(Click)
Email: miya@mvme.cn
QQ: 2851195450
Tel: 86-18020776792
Skype: miyazheng52
Company Details
Business Type:
Agent,Trading Company
Year Established:
2011
Total Annual:
<200000000
Employee Number:
80~100
Ecer Certification：
Verified Supplier
Moore Automation is a company specializing in the sales of modules and spare parts for world-renowned brands (DCs systems, robot systems, large servo control systems). The company's products include: distributed control systems (DCS), programmable controllers (PLC), MOTOROLA -MVME industrial mod... Moore Automation is a company specializing in the sales of modules and spare parts for world-renowned brands (DCs systems, robot systems, large servo control systems). The company's products include: distributed control systems (DCS), programmable controllers (PLC), MOTOROLA -MVME industrial mod...
Get in touch with us
Leave a Message, we will call you back quickly!