MOORE AUTOMATION LIMITED
| Payment Terms | T/T |
| Supply Ability | 10 pieces a day |
| Delivery Time | today |
| Packaging Details | new and original with factory sealed |
| Manufacture Year | 2016 |
| Control System | ABB Module System |
| Application | Nuclear Power Plant |
| lead time | in stock |
| description | 1203-GD1 1203GD1 AB 1203 GD1 COMMUNICATION MODULE |
| Weight | 4lbs |
| Brand Name | Allen Bradley Modules |
| Model Number | 1203-GD1 |
| Certification | CO.CQ |
| Place of Origin | Sweden |
View Detail Information
Explore similar products
Allen Bradley Modules 1761-NET-AIC ADVANCED INTERFACE CONVERTER 20AMP/M 20.4-28
Allen Bradley 1746-NO4I Analog Output Modules For Electricity
Allen Bradley 1747-KE Interface Module High quality Processor Module New And
Allen Bradley Modules 1747-KE 1747KE AB 1756EN2T ETHERNET IP BRIDGE MODULE High
Product Specification
| Payment Terms | T/T | Supply Ability | 10 pieces a day |
| Delivery Time | today | Packaging Details | new and original with factory sealed |
| Manufacture Year | 2016 | Control System | ABB Module System |
| Application | Nuclear Power Plant | lead time | in stock |
| description | 1203-GD1 1203GD1 AB 1203 GD1 COMMUNICATION MODULE | Weight | 4lbs |
| Brand Name | Allen Bradley Modules | Model Number | 1203-GD1 |
| Certification | CO.CQ | Place of Origin | Sweden |
| High Light | allen bradley cpu ，allen bradley plc 5 | ||
Allen Bradley Modules 1203-GD1 1203GD1 AB 1203 GD1 COMMUNICATION MODULE NEW in sealed box
Product Description:
Remote I/O communications modules are connected to Remote I/O links with twinaxial cable used for Remote I/O and Data Highway Plus (DH+) communications. When selecting a cable, remember the
following: Only 1770-CD Belden #9463 is tested and approved for RIO and DH+ installations. Using other cables is at your own risk.The total cable length depends on the baud rate that you are using. Refer to the following table:You must terminate both ends of a Remote I/O link to ensure proper operation. This termination is required only at the ends of the physical cable. Each Remote I/O link should have exactly two termination resistors. If the device that you connect is an end device on the Remote I/O
link, it must be terminated. Refer to the following table to select a resistor.
Related Product Recommendation:
| 426-M5E-DNT | 1336F-MCB-SP1K | 1746-IV32 |
| 1426-M6E | 1361-NO61-2-5 | 1746-N2 |
| 1426-M6E-DNT | 1394-AM75 | 1746-NI04I |
| 1440-5AFUSEKIT | 1394-SJT05-C-RL? | 1746-NIO4V |
| 1440-ACNR | 1394C-AM04 | 1746-NO4I |
| 1440-DYN02-01RJ | 1394C-AM07 | 1746-NO4V |
| 1440-PK02-05M0 | 1395-A65N-C1-PZ | 1746-NR4 |
| 1440-REX00-04RD | 140CRP93100 | 1746-NT4 |
| 1440-REX03-04RG | 1440-ACNR | 1746-OA16 |
| 1440-RMA00-04RC | 1440-DYN02-01RJ | 1746-OAP12 |
| 1440-SCDB9FXM2 | 1440-TB-A | 1746-OB16E |
| 1440-SDM02-01RA | 1440-TBS-J | 1746-OB8 |
| 1440-SPD02-01RB | 1440-VSE02-01RA | 1746-OBP16 |
| 1440-TPR06-00RE | 1492-XIM4024-16R | 1746-OG16 |
| 1440-TPS02-01RB | 15-131623-00 | 1746-OV32 |
| 1440-TTC06-00RE | 1734-ACNR | 1746-OV8 |
| 1440-TUN06-00RE | 1746-BTM | 1746-OW4 |
| 1440-VAD02-01RA | 1746-C9 | 1746-OX8 |
| 1440-VDRP06-00RH | 1746-FIO4V | 1746-P1 |
| 1440-VDRS06-00RH | 1746-HS | 1746-P2 |
| 1440-VDRS06-06RH | 1746-HSCE2 | 1746SC-IA8I |
| 1440-VLF02-01RA | 1746-HSRV | 1746SC-IN04VI |
| 1440-VSE02-01RA | 1746-HT | 1746SC-INI4I |
| 1441-DYN25-2C | 1746-IA8 | 1746SC-NO8I |
| 1441-DYN25-CAP | 1746-IC16 | 1747-ACN15 |
| 1441-DYN25-CBL2CH | 1746-IH16 | 1747-AIC |
| 1441-DYN25-CBLHS | 1746-IO12 | 1747-AICR |
| 1441-DYN25-CD | 1746-IO8 | 1747-ASB |
| 1441-DYN25-M4CH | 1746-ITB16 | 1747-BA |
| 1441-DYN25-MBAL | 1746-ITV16 | 1747-DCM |
| 1441-DYN25-MBMP | 1746-IV16 | 1747-KE |
Product's Character:
The Remote I/O communications module allows a SCANport product to look and act like a Remote I/O chassis when connected to a programmable controller. Data contained in the input/output image
table is transferred between the programmable controller by the Remote I/O scanner, the same as with any Remote I/O chassis. You control the location of data transferred by setting the rack address and
starting group. You control the amount of data by setting the DIP switches on SW3.
Important: The communications module does not scale the data that is transferred. Consequently, all scaling of the data must be done in the controller. Refer to the user manual for your SCANport product for details on device units. Important: The Remote I/O to SCANport conversion is asynchronous.
Data sent to the adapter for transfer to the drive must be maintained until the drive has received data.DIP switches on SW3 determine how the data contained in the programmable controller I/O image table is used in the drive. Figure shows an I/O image table.
1745-C2 Interconnect Cable AB
1745-C2 B Interconnect Cable, Series B AB
1745-C3 SLC 150 Interconnect Cable AB
1745-C3 A SLC 150 Interconnect Cable, Series A AB
1745-E101 Expansion Unit AB
1745-E102 Expansion Unit AB
1745-E103 Expansion Unit AB
1745-E104 Expansion Unit AB
1745-E105 Expansion Unit AB
1745-E106 Expansion Unit AB
1745-E107 Expansion Unit AB
1745-E151 SLC 150 Expansion Unit AB
1745-E152 SLC 150 Expansion Unit AB
1745-E153 SLC 150 Expansion Unit AB
1745-E154 SLC 150 Expansion Unit AB
C SLC 150 High Speed Input Module AB
1745-E156 SLC 150 Expansion Unit AB
1745-E157 SLC 150 Expansion Unit AB
1745-LP101 Processor Unit AB
1745-LP102 Processor Unit AB
1745-LP103 Processor Unit AB
1745-LP104 Processor Unit AB
1745-LP151 SLC 150 Processor Unit AB
1745-LP152 SLC 150 Processor Unit AB
1745-LP153 SLC 150 Processor Unit AB
1745-LP154 SLC150 SLC 150 Processor Unit AB
1745-LP156 SLC 150 Processor Unit AB
1745-LP157 SLC 150 Processor Unit AB
1745-M1-- EEPROM Memory Module AB
1745-PCC SLC Personal Computer Interface Converter AB
1745-PT1 Hand Held Programmer AB
1745-TCAT TCAT SLC-100 Timer Counter Access Terminal AB
The use of the product:
1.aluminum smelting machines,
2.Power industry,
3.the elevator industry,
1.emission reduction
2. new and original
3.1 year warranty
Our advantages:
1.365 days warranty for all the goods from us.
2.2000+ suppliers with us, we could help you to get any components which is difficult to get.
3.Risk-free guarantee, 60 days refund. If the item you purchase from our store are not of perfected quality, simply return them to us for replacement or refund.
1.Q: What is the capacity of your warehouse?
A: We have 1-2Mil USD safe stocks and 3 warehouses, which located Xiamen, Shenzhen & Hongkong.
2.Q:What about your shipping terms ?
A: We can ship by DHL,UPS,FEDEX,ARAMAX,TNT,and so on
3.Q:What about your lead time ?
A: We have many itmes in stock , 3-5 days you will receive it .
Send your Inquiry details in the Below, Click "Send" Now!
Email :sales@mooreplc.com
Q Q: 2851195450
Skype: miyazheng520
Mobile:86-18020776792 ( what's app )
Company Details
Business Type:
Agent,Trading Company
Year Established:
2011
Total Annual:
<200000000
Employee Number:
80~100
Ecer Certification：
Verified Supplier
Moore Automation is a company specializing in the sales of modules and spare parts for world-renowned brands (DCs systems, robot systems, large servo control systems). The company's products include: distributed control systems (DCS), programmable controllers (PLC), MOTOROLA -MVME industrial mod... Moore Automation is a company specializing in the sales of modules and spare parts for world-renowned brands (DCs systems, robot systems, large servo control systems). The company's products include: distributed control systems (DCS), programmable controllers (PLC), MOTOROLA -MVME industrial mod...
Get in touch with us
Leave a Message, we will call you back quickly!