Shanghai Juyi Electronic Technology Development Co., Ltd

China,Shanghai ,Shanghai
Verified Supplier

Send Email



Leave a Message

we will call you back quickly!

Submit Requirement

Home>
BLDC Motor Driver>
230V AC Round Brushless BLDC Motor Driver For Axial Flow Ventilator Fan

China 230V AC Round Brushless BLDC Motor Driver For Axial Flow Ventilator Fan





230V AC Round Brushless BLDC Motor Driver For Axial Flow Ventilator Fan

MOQ： 1 set
Price： Negotiable
Get Latest Price


Payment Terms	T/T,L/C,Paypal
Supply Ability	1000sets/day
Delivery Time	5-10 days
Packaging Details	PE bag+ carton
Working voltage	90-265V AC
Working current	0.5A
Suitable motor	sensorless motor
Operating temp.	-20—85℃
Shape	Round
Max current	1A
Brand Name	JUYI
Model Number	JYQD-V8.6
Place of Origin	China

View Detail Information

Contact Now Ask for best deal

Get Latest Price Request a quote

Explore similar products

12-36V DC BLDC Motor Driver Motor Controller for 3 - Phase Sensorless DC Motor

Get Latest Price
12V-24V 15A BLDC Motor Driver PWM Speed Driver For Sensorless BLDC Motor JYQD-V6

Get Latest Price
12V-36V JUYI Brushless Motor Controller Driver Board With Three-phases for

Get Latest Price
JUYI JYQD-V8.3E Bare Board Bldc Motor Control Board , High Voltage Dc Motor

Get Latest Price

Product Details
Company Details

Product Specification


Payment Terms	T/T,L/C,Paypal	Supply Ability	1000sets/day
Delivery Time	5-10 days	Packaging Details	PE bag+ carton
Working voltage	90-265V AC	Working current	0.5A
Suitable motor	sensorless motor	Operating temp.	-20—85℃
Shape	Round	Max current	1A
Brand Name	JUYI	Model Number	JYQD-V8.6
Place of Origin	China
High Light	Ventilation Fan BLDC Motor Driver ，Round BLDC Motor Driver ，230V AC Motor Driver Brushless

230V AC Round Brushless BLDC Motor Driver for axial flow ventilator fan

(For Brushless Sensorless DC motor )

Application notes:

1. Confirm that the voltage and power parameters of the motor not exceed the range of the driver board as specified.

2. This driver board is used for 3-phase brushless sensorless motor, but not suit for all 3-phase brushless sensorless motors directly. If the driving effect is not good (such as starting jitter, reversing, the motor noload working current is too large, the speed is not stable, the efficiency is low, and can’t start-up with load.) Customers can adjust the resistance and capacitance of the driver board according to the actual situation to achieve the best driving effect (see the attachment for how to do the adjustment)

3. JYQD-V8.6 driver board is bare board without housing and heatsink. If the power of the motor below 60W ,it does not need to add heatsink, It only needs to ensure normal ventilation and well insulation. If the power of the motor more than 60W, it must add heatsink like the diagram as below.

4. The 5V output port on the driver board prohibits connect external device. It is only applicable to the external potentiometer and switch of the board for speed regulation and reversal.

5. The “M” terminal on the JYQD-V8.6 driver board is the motor speed pulse output signal (push-pull output), and the maximum output current is less than 5mA.

Wiring diagram

5V -----Driver board internal output voltage

M ---- Motor speed pulse signal output port, 5V pulse signal.

1. Control port

Z/F---- Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0 V low level or connect to GND is reverse direction.

VR ----Speed control port. Analog voltage linear speed regulation 0.1v -5V, The input resistance is 20K Ohm ,connect with GND when input PWM speed regulation, PWM frequency:1-20KHZ; Duty cycle 0-100%

GND—Used for Drive board internal control

2. Power port

U/MA ----motor phase A

V/MB ---- motor phase B

W/MC---- motor phase C

AC----L

AC----N

3. Use shielded wires if the drivers board has more than 50 cm distance from the motor, otherwise it may lead to abnormal driving, affecting the normal use.

4.This AC input driver board can be the built-in driver in application

5. Pay attention to the insulation between the driver MOSFET and the heatsink or the installation plate.

Model number	JYQD-V8.6
Operating temp.	-20—85℃
Operating voltage	110V AC / 220V AC
Max current	1A
Cont.working current	0.5A
PWM speed control	PWM frequency:1-20KHZ; Duty cycle 0-100%
Analog voltage speed regulation	0-5V
O.V / L.V protection	YES
Speed pulse signal output	YES

Dimensional drawing

DOWNLOAD JYQD-V8.6 USER MANUAL

Company Details

Bronze Gleitlager

Bronze Sleeve Bushings

and

Graphite Plugged Bushings

from Quality China Factory



Business Type:

Manufacturer 


Year Established:

2010 


Total Annual:

5000000-10000000


Employee Number:

100~200 


Ecer Certification：

Verified Supplier 

Shanghai Juyi Electronic Technology Development Co., Ltd established in 2010, Its a high-tech enterprise specializing in research, development, production and sales of brushless motor controller products. Its headquarters and research and development base are established in international economy, fi... Shanghai Juyi Electronic Technology Development Co., Ltd established in 2010, Its a high-tech enterprise specializing in research, development, production and sales of brushless motor controller products. Its headquarters and research and development base are established in international economy, fi...

+ Read More

Reach Us
Shanghai Juyi Electronic Technology Development Co., Ltd
No. 1, lane 1199, yunping road, jiading district, Shanghai,China
https://www.bldcmotor-driver.com/

Send Email

Leave a Message, we will call you back quickly!