Product Specification

The dual mass flywheel bearing or bushing is a crucial component in the transmission system of many modern vehicles. Its main function is to connect the engine crankshaft to the transmission input shaft while effectively isolating engine vibrations from the vehicle's chassis and passenger compartment.

The dual mass flywheel consists of two rotating masses connected by springs and dampers, with the bearing or bushing located at the interface between the two masses. This design allows the flywheel to absorb and dampen engine torsional vibrations, reducing noise and harshness in the vehicle's cabin.

The bearing or bushing itself is a precision-engineered component made from high-quality materials, such as metal-plastic composites. It must be able to withstand the high loads and frequent rotations of the engine crankshaft while maintaining smooth operation and minimal wear.

Failure of the dual mass flywheel bearing or bushing can lead to various symptoms, including increased vibration and noise in the cabin, poor transmission performance, and even damage to other transmission components. Therefore, it's important to inspect and replace these components regularly as part of routine vehicle maintenance.

In summary, the dual mass flywheel bearing or bushing plays a vital role in ensuring smooth and reliable transmission operation while minimizing engine vibrations in modern vehicles.

Dual Mass Flywheel DMF Self-lubricating Bearings Supplier

Flywheel Bearing, a complete line of flywheels bushings.

Clutch Bushing Selection

Best value Flywheel Bearing – Great deals on www.bronzegleitlager.com

Automobile Industry Sliding Bearing Dual Mass Flywheel DMF & Seat Adjuster Self-Lubricating Bearings

VIIPLUS is committed to the production of safe and comfortable modern vehicles, adhering to the concept of high standards of application design, function, and performance, to optimize the selection of bearings for the automotive industry.VIIPLUS offers a variety of bearing solutions for automotive applications.

Typical Applications

VIIPLUS Specifically developed to meet the requirements of RoHS environmental protection of various types of self-lubricating bearings used in the automobile industry, such as Double Mass Flywheel Repair self-lubricating Bearings, when tight round, air conditioning compressor, fuel pump, start the motor, transmission, steering pump, steering column, shock absorbers, braking system, pedal assembly, seat adjustment system, door hinge, hinge, suitcase, hood wiper, including engine connecting rod, transmission, balance shaft, and other parts.

Provide efficient products for automotive applications

Even in the most demanding environments, customers can rely on the unique features of VIIPLUS sliding bearings, including low friction, high wear resistance, and high reliability.
Bearings for automotive applications include wiper, shock absorber, seat, gearbox, brake, steering, convertible top, interior, pillar, lever, pedal and other applications.

Create a superior driving experience

In recent years, the requirement of automobile equipment operation has been increasing. Our lead-free bearing material, with enhanced performance, can meet the most stringent performance requirements, better than ball bearings (limited space and weight, high load and swing movement may cause damage).
The bearing has many advantages, creating superior driving performance:
· long service life, reliable and smooth operation
· high wear resistance
Self-lubricating,
· low friction coefficient, low loosening torque, and no stick-slip phenomenon
· compatible with many standard oils and lubricants
· high precision and stable size

Our self-lubricating bearings advantages

· a wide range of efficient bearing materials and solutions to meet the most demanding application requirements.
· compact, lightweight solutions reduce fuel consumption and emissions.
· seat: seat adjuster and height adjustment mechanism.
· continuous innovation of technologically advanced products, systems, and tools to maintain our leading position in high-performance bearing technology.
· our application specialists provide technical support and customer-specific bearing designs to provide comprehensive customer support.

Metal Polymer Composites Plain Bearing

Improve quality and environmental standards
Our environmentally friendly, lead-free bearings reduce installation, operation, and maintenance costs.

• ROLLED DRY SLIDING BEARINGS ()
• Steel + Bronze Powder + /Fibre
• Wrapped Lined (maintenance-free), self lubricated plain or flanged bearings, thrust washer and strip, Carbon steel shell with sintered bronze layer filled with

VSB-10 Self-Lubricating Multilayer Composite Bushing

• Bushing material suitable for lubricated applications
• self-lubricating bushings offer very good wear and low friction performance over a wide range of loads, speeds and temperatures in dry running conditions
• Anti-friction bearing suitable for linear, oscillating, and rotating movements 
• Material is designed to operate without supplemental lubrication and will perform excellent when lubrication is present. Low friction, low wear rate, good sliding characteristics and very low absorption are a few of the features of this material. VSB-10 bushings will support the rotary, linear and oscillating motion.

 
1. /Fibre mixture thickness 0.01~0.03mm. It is the contact surface for the rotating shaft. Minute partides of the layer and the sintered bronze material combine to create a solid lubricant film, which coats the shaft.
 
2. Sintered bronze powder thickness 0.20*0.35mm,A special composition of powdered copper is thermally fused to the steel backing. This contact layer acts as an anchor for the layer and conducts the thermal build up away from the bearing surfaces.

3. Low-carbon steel backing. Setting the foundation of the bushings, the steel back provides exceptional stability, load carrying and heat dissipation characteristics.

Carbon Steel + Copper Powder + ( + Pb + Filler) 

· Metal-Polymer Composite Self-lubricating Bushing Material
· Steel Back + Porous Bronze Sinter +
· + Lead

Bearing forms available in standard dimensions
· Cylindrical bushes
· Flanged bushes
· Thrust washers
· Flanged washers
· Sliding plates

The main factors affecting the life of self - lubricating bearings

1: load P: the greater the load, the shorter the service life of the bearing;Under no circumstances shall the maximum load exceed the theoretical maximum allowable load.
2: speed V: the higher the speed, the shorter the service life of the bearing;Under no circumstances shall the maximum sliding speed exceed the theoretical maximum allowable value.
3: PV value: the working life of the bearing depends on the PV value, that is, the product of the actual load P and the sliding speed V. The smaller PV value is, the longer the bearing life is.
4: temperature: the life of the bearing also depends on the temperature when the bearing is in use, the higher the temperature, the shorter the life of the bearing, so in the design and selection should try to consider the heat dissipation characteristics of the relevant parts.
5: surface roughness of the grinding parts: alloy steel or hard chromium plated shaft is used for the grinding parts. When the surface roughness Ra=0.4-0.63, the service life of the bearing can be significantly improved.
6: other factors such as bearing design, lubrication conditions, etc