Ecer asks for your consent to use your personal data to:
Personalised advertising and content, advertising and content measurement, audience research and services development
Store and/or access information on a device
Your personal data will be processed and information from your device (cookies, unique identifiers, and other device data) may be stored by, accessed by and shared with 135 TCF vendor(s) and 65 ad partner(s), or used specifically by this site or app.
Some vendors may process your personal data on the basis of legitimate interest, which you can object to by do not consent. Contact our platform customer service, you can also withdraw your consent.
Bundles for each piece then packed in seaworthy wooden cases for Industrial Pipe
Port
Ningbo
Supply Ability
Supply Ability
500 Ton/Tons per Month
Material introduction
Alloy C2000 this alloy is designed to resist more corrosive chemicals, including sulfuric acid, hydrochloric acid, chlorofluoroic acid. Different from the previous optimized NI-CR-MO alloy, which can only resist oxidizing or reducing acids, C-2000 alloy has corrosion resistance in both environments. The combined action of molybdenum and copper (at 16% and 1.6% respectively) makes the alloy have excellent corrosion resistance in reducing medium, and the high chromium content (23% wt) ensures the corrosion resistance in oxidizing medium.
Product introduction (the following is typical chemical composition and mechanical properties (ASTM) reference) :
Executive standard
Form
ASTM
Plate, sheet, and strip
ASTM B 575
Seamless pipe and tube
ASTM B622
Bar
ASTM B574
Welded pipe and tube
ASTM B619
Forging
ASTM B564
%
Ni
Cr
Mo
Fe
Co
C
Mn
Si
P
min
balance
22.0
15.0
max
24.0
17.0
3.0
2.0
0.010
0.50
0.08
0.025
Physical properties
Product name
ALLOY C-2000
UNS N06200
NICR23M016CU
Density
8.9 g/cm3
Melting range
1335-1380℃
The minimum value of the mechanical properties of an alloy at room temperature
Alloys and states
Tensile strength
Yield strength
Extend rate
RM N/MM2
RP0.2N/MM2
A5%
Alloy C-2000
690
283
45
Product features
Alloy C2000 this alloy is designed to resist more corrosive chemicals, including sulfuric acid, hydrochloric acid, chlorofluoroic acid. Different from the previous optimized NI-CR-MO alloy, which can only resist oxidizing or reducing acids, C-2000 alloy has corrosion resistance in both environments. The combined action of molybdenum and copper (at 16% and 1.6% respectively) makes the alloy have excellent corrosion resistance in reducing medium, and the high chromium content (23% wt) ensures the corrosion resistance in oxidizing medium.
1. It is not appropriate for NI-CR-MO alloy to undergo post weld stress relief treatment at about 650 ℃. Generally, post weld heat treatment is not required, but if stress relief is required, complete solution annealing at 1149 ℃ is recommended, followed by water treatment. 2.The hot working temperature of the alloy ranges from 1080 ℃ to 900 ℃, and the cooling method is water or other rapid cooling methods. In order to ensure the best corrosion resistance, solution heat treatment should be carried out after hot working.
Metallographic structure
Alloy C-22 has a face centered cubic crystal structure Alloy C2000 alloy has a face-centered cubic lattice structure, and its chemical composition ensures metallographic stability and anti-sensitization.
Corrosion resistance
Alloy C2000 is designed to resist more corrosive chemicals, including sulfuric acid, hydrochloric acid, and hydrofluoric acid. Different from the previous optimized Ni-Cr-Mo alloy, which can only resist oxidizing or reducing acids, C-2000 alloy has corrosion resistance in both environments.
The combined action of Mo and Cu (at 16% and 1.6% levels respectively) makes the alloy have excellent corrosion resistance in reducing medium, and the high chromium content (23% wt) ensures the corrosion resistance in the oxidizing medium.
Scope of application
Allow C2000 offers great potential to increase production. When used in the original Ni-Cr-Mo alloy, its enhanced corrosion resistance can obtain longer equipment life under the same material thickness and higher safety factor under worse conditions. With the improvement of corrosion resistance in all aspects, the equipment can be used for many purposes (reactor, heat exchanger, valve, pump, etc.), so as to receive greater return on investment. For example, a reactor can adapt to hydrochloric acid mixture, and then change into nitric acid based mixture. C-2000 is the best nickel based alloy material that can adapt to various processes because of its unique ability.
8. Flue gas scrubber system 9. Geothermal well 10. Incineration washer system 11. Nuclear fuel regeneration 12. Pesticide production 13. Phosphoric acid production 14. Pickling system
TOBO GROUP sales head offce in Shanghai.
We are one of the Professional manufacturers Exporter Pipeline products in China .Our company was established in 1998, the plant covers 550, 000 square meters and a construction area ... TOBO GROUP sales head offce in Shanghai.
We are one of the Professional manufacturers Exporter Pipeline products in China .Our company was established in 1998, the plant covers 550, 000 square meters and a construction area ...
