Corrosion Resistance 2mm Carbon Fiber Plate 3K Twill Weave

Product Specification

Corrosion Resistance (0.3-2)mm Carbon Fiber Plate Board Panel Sheet 3K Twill Weave

LIJIN Carbon components are carefully hand-crafted using only the finest materials. Our production team offers superior craftsmanship with over 10 years of experience working with carbon fiber.

Every component is constructed with a consistent weave pattern. Our production processes allow exceptional carbon/resin ratio, creating high product stiffness that also leads to extra strength. For a stunning finish, our products are coated with a glossy clear coat that does not chip or flake. We meticulously inspect all of our components and stand firmly behind our products so that you can enjoy peace of mind with every genuine Seibon Carbon product.

Features:

• Resistance to ultraviolet light.
• Light in weight, durable in use.
• 3K and gloss surface treatment.
• High strength and good flexibility.
• Anti-aging and corrosion resistance.
• Apply to medical instruments, cars material, sports goods, civil engineering.

Carbon Fibre Sheets

Carbon fibre sheets are reinforced composite materials in sheet form, manufactured from carbon fibre fabric infused with epoxy resins and heated to a high temperature. Carbon fibre sheet has exceptional mechanical properties and it is commonly used in industrial settings. Carbon fibre sheets are lightweight yet highly durable protective sheets, available in a range of thickness and density sizes to suit your needs.

Carbon fibre sheets also include a wide range of benefits including low thermal expansion, corrosion and UV resistance, radiolucency and good electrical conductivity. Thus making carbon fibre sheets ideal for use in both industrial and electrical engineering applications.

How are Carbon fibre sheets made?

Composite materials are produced by combining a reinforcing fibre with a resin matrix system such as epoxy resin. This combination of fibre and resin provides characteristics superior to either of the materials alone and are increasingly being used as replacements for relatively heavy metallic materials.

In a composite material, the fibre carries most of the load and is the major contributor to the composite material properties. The resin helps to transfer load between fibres, prevents them from buckling and binds the materials together. This process produces sheets with one smooth glossy resin rich side and the other rougher side showing the fabric weave detail.

Carbon fibres are produced from polymer fibres such as polyacrylonitrile. The initial fibre material is heated to around 1000°C causing 2-dimensional carbon-carbon crystals (graphite) to be formed when hydrogen is driven out. The carbon-carbon chain has strong molecular bonds and is what gives the fibres their high strength.

Applications for Carbon Fibre Sheets

Carbon fibre sheets are strong, stiff, and lightweight. They are an ideal choice for applications where lightweight and superior performance is important, such as components for aircraft, automotive, rail and high-quality consumer products.

These carbon fibre sheets from LIJIN can withstand heavy loads and sudden impacts without bending or buckling. This makes them a favoured alternative to heavy metallic parts in settings where strong but lightweight components are required, such as in the automotive, railway and aerospace industries.

Made by combining polymer fibres, like polyacrylonitrile, with an epoxy resin matrix system, the carbon fibre sheets have two different sides. One resin-rich side is sleek and the reverse has a twill-fabric weave detail. The sheets have a maximum operating temperature of +80°C, a density of only 1.6 g/cm³ and a thickness of just 1 mm.

Carbon fibre is not only suited to industrial use. Its excellent performance has lent itself to use in consumer goods such as phone cases, state-of-the-art speaker cabinets and motorcycle conversion kits.

Single-Sided Carbon Fiber Plate Specification:

FAQ:

1. Are you a factory or a trading?

We are a factory, with more than 16 years experience in composite products. We are one of the top manufacturers of carbon fiber tubes in China.

2. Can you send us a sample to check?

Yes, we can send you a free sample to check. You can pay the freight costs. When you place an order, we will return the freight cost to you.

3. What about the terms of payment?

T/T, L/C, Western union, etc

4. When can I get the quotation?

We usually quote within 24 hours after we get your inquiry.

5. What’s the difference between Chengcheng and other factories?

We have our own technology and research team. Our products strictly follow the quality control system in the composite products field.

6. Do you provide OEM service

Yes. OEM is welcome. We can make molds according to customers’ drawings and samples