High Gloss Car Body Spray Automotive Aerosol Spray Paint High Performance

Product Specification

Mirror Electroplated Spray Paint High Gloss Metallic Feel

Function:

This product is an aerosol paint that imitates chrome plating, gold plating, zinc plating, and silver plating. It is made of special metal pigments, special resins and additives. It has the characteristics of flexible and easy use, good atomization, and high spray rate. It has good decorative and protective functions for metals, surface-treated wood, glass, ABS plastics and other materials. The paint film has a strong metal mirror effect, which is comparable to electroplating.

Product Advantages:

• Multi-material adaptation, wide application

  Can be used on a variety of surfaces such as metal, glass, ABS plastic, wood, etc., suitable for furniture, toys, decorations, car modification, advertising props and other scenes.

• International standard raw materials, more environmentally friendly and more flexible

  Meet the requirements of European and American markets for environmental protection regulations (such as REACH), solve the pain points of traditional electroplating "high pollution, high cost", suitable for industrial and handicraft exporters to promote.

• Imitation of electroplating effect, high cost performance

  Presents a mirror-like metallic luster, comparable to the appearance of electroplating, and the cost is much lower than the traditional electroplating process. It is suitable for DIY enthusiasts and small and medium-sized manufacturing companies who pursue "high appearance + low budget".

• Convenient operation, adapted to the DIY market

  Spray can packaging is convenient for retail and end users to use, meeting the market demand for personalized hand-made creation, model painting, and car color change in Europe, America, Japan, South Korea and other countries.

Operation Specifications:

1. Clean the surface
   Make sure the spray surface is dry, oil-free, dust-free, and rust-free. If necessary, lightly sandpaper and clean it first.
2. Shake the spray can
   Before use, shake the spray can up and down for 1-2 minutes to ensure that the metal pigment and resin are fully mixed to avoid color difference and particles.
3. Test spraying
   Test spraying on waste paper or waste board for a few seconds to ensure that the nozzle is unobstructed and the atomization is uniform.
4. Distance and angle
   The distance from the spray surface is 15-25 cm, and the nozzle is kept vertical or slightly inclined to the surface to avoid dead corners and paint dripping.
5. Spray thinly multiple times
   Spray 1 layer each time, wait for 5-10 minutes for the surface to dry before spraying the next layer. It is recommended to spray 2-3 layers, and do not spray thickly at one time.
6. Natural drying
   After spraying, let it stand for 24 hours to dry completely. Avoid touching it to avoid damaging the mirror effect.

Notices:

• Usage environment
  Avoid high temperature/high humidity/strong wind environment: It is recommended to spray in a well-ventilated, dust-free, dry room or sheltered place.
  The recommended ambient temperature is 15°C~30°C. Excessive humidity will cause fogging, wrinkling or decreased adhesion.

• Safety protection
  Wear a mask and gloves during operation to avoid inhalation of aerosols or direct skin contact;

  Keep away from open flames, high temperatures or children to avoid heating or puncture of the can;

  After use, please invert the spray can for 2-3 seconds to clean the nozzle to prevent clogging.