Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram,PayPal |
Supply Ability | 3000 Metric Ton/Metric Tons per Month |
Delivery Time | 1 FCL:14 Days |
Packaging Details | On pallet with steel bundles |
Material | Magnesium metal |
Dimensions | Specifications,high potention |
rod | diameter 1" 1/2 " 3/4" |
application | electric / hot water heater |
Brand Name | OEM |
Model Number | OEM Custom-made |
Certification | REACH ROHS |
Place of Origin | China |
View Detail Information
Explore similar products
AZ63 Material Magnesium Anode Rod Replacement For Hot Water Heater
High Potential HP Extruded magnesium ribbon anode For Buries Structures
Under earth pipeline cathodic protection system Magnesium Anode With Cable
32 lb prepackaged magnesium soil anode with 20' of #10 awg thhn wire
Product Specification
Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram,PayPal | Supply Ability | 3000 Metric Ton/Metric Tons per Month |
Delivery Time | 1 FCL:14 Days | Packaging Details | On pallet with steel bundles |
Material | Magnesium metal | Dimensions | Specifications,high potention |
rod | diameter 1" 1/2 " 3/4" | application | electric / hot water heater |
Brand Name | OEM | Model Number | OEM Custom-made |
Certification | REACH ROHS | Place of Origin | China |
High Light | Alloy Magnesium Anode Rods ,AZ63 Casting Magnesium Anode Rods ,Hot Water Heater Magnesium Anode |
Boiler And Water Heater Magnesium Anode Rods Mg Alloy Sacrificial Anode AZ63 Casting Anode Rod
The function of the magnesium rod The function of the magnesium rod is to react with the ions in the water by itself to prevent the adhesion of alkali and scale in the inner tank of the water heater and cause the inner tank to be corroded. After the electric water heater has been used for a period of time, if the water output is slow and the electricity consumption is large, it is most likely that the magnesium rod of your water heater needs to be replaced.
If the magnesium rod is not replaced, the electric water heater whose inner tank is prone to corrosion and leaking enamel tank must be replaced regularly. Because the enamel liner is made by coating and firing a layer of inorganic ceramic glaze on the special steel plate of the water heater, it does not rust and is welcomed by the majority of users. However, air bubbles or pinholes are prone to occur in the production process of enamel liner. At the same time, enamel is relatively brittle, and vibration and collision during transportation and installation are prone to scale explosion. In addition, the enamel will gradually dissolve and peel off in hot water. The above factors will cause the ordinary steel plate under the enamel coating to be exposed. The ordinary steel plate contains more impurities such as carbon and sulfur, which will easily cause the inner tank to corrode and leak.
Product Type: | Magnesium rod |
Material: | Magnesium alloy AZ31 |
Differnet kinds: | Casting rod,Extruded rod,Rod with steel cap,Flexible anode rod |
Chemical composition: | Al:2.5-3.5%, Zn:0.6-1.4%,Mn:0.2-1.0%,Fe:0.005%max,, Cu:0.01%max,Ni:0.001%max,Si:0.1%max, Other:0.3%max,Mg:Balance |
Propertices: | Open-circuit voltage: 1.5-1.55V Close-circuit voltage:1.45-1.50V Actual capacitance: 1.105A.h/g Current efficiency:50%min |
Steel cap: | stainless steel,galvannized ,in black,coppper,etc. |
Application: | It mainly used in water heater,boiler,heat exchanger,water tank,etc. It can softing water,de-dirt residual,ensure water sanitation,water scale inhibition,protect inner tank,extend service life,etc. |
Feasures: | The extruded anode rod can be with or without steel core,can be with steel cap or only with screw;the size of cap/screw can be customilized by your specific requirements. Mainly different kinds of steel cap and screw available. |
The anode rod of the water heater is still very useful. The electrochemical reaction is used to make the metal ions in the water produce water-soluble salts, so as not to scale in the water heater, prolong the service life of the water heater and ensure the normal operation of the machine.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Exporter,Seller
Year Established:
2006
Total Annual:
15000000-20000000
Employee Number:
50~100
Ecer Certification:
Verified Supplier
China Hunan High Broad New Material was founded in 2006, focus on the business in advanced new material and service. Including: design, installation, material , engineering, maintenance and technical support. Our sales office located in Changsha, Hunan province, plant located in Hunan,S... China Hunan High Broad New Material was founded in 2006, focus on the business in advanced new material and service. Including: design, installation, material , engineering, maintenance and technical support. Our sales office located in Changsha, Hunan province, plant located in Hunan,S...
Get in touch with us
Leave a Message, we will call you back quickly!