Corrosion Resistant ​​Polyester Unsaturated Resin Marine Grade FRP Composites

Product Specification

​​Unsaturated Polyester Resin : Marine Grade FRP Composites For Corrosion Resistant Industrial

​​1. Product Introduction​​

Unsaturated Polyester Resins (UPR) are versatile thermosetting polymers synthesized from unsaturated dibasic acids and diols, dissolved in reactive monomers like styrene. Renowned for their ​​excellent mechanical properties​​, ​​chemical resistance​​, and ​​cost-effectiveness​​, UPRs are widely used in composite manufacturing. Key features include:

• ​​High Strength-to-Weight Ratio​​: Ideal for lightweight structural applications.

• ​​Thermal Stability​​: Withstands temperatures up to 135°C.

• ​​Customizability​​: Modifiable for flame retardancy, UV resistance, or low shrinkage.

• ​​Fast Curing​​: Ambient or elevated temperature curing for rapid production cycles.

UPRs form the backbone of ​​glass fiber-reinforced plastics (FRP)​​, coatings, and castings, serving industries from marine engineering to aerospace.

​​2. Production Process​​

The manufacturing of UPR involves precise steps to ensure optimal performance:

1. ​​Polycondensation​​:

   • Dibasic acids (e.g., phthalic anhydride) react with diols (e.g., propylene glycol) at 180–220°C to form a prepolymer.

   • Water is removed as a byproduct during this stage.

2. ​​Monomer Dissolution​​:

   • The prepolymer is dissolved in styrene (30–50% by weight) to reduce viscosity and enable cross-linking.

3. ​​Additive Incorporation​​:

   • ​​Inhibitors​​ (e.g., hydroquinone) prevent premature curing.

   • ​​Promoters​​ (e.g., cobalt naphthenate) accelerate curing when combined with initiators (e.g., MEKP).

4. ​​Curing​​:

   • ​​Gelation​​: Initiators generate free radicals, cross-linking the polymer chains (15–45 minutes at 25°C).

   • ​​Post-Curing​​: Heating to 80–120°C enhances cross-link density and mechanical strength.

5. ​​Quality Control​​:

   • Parameters like viscosity (350–620 mPa·s), gel time (5–15 minutes), and solid content (57–68%) are rigorously tested.

​​3. Usage Precautions​​

• ​​Safety​​:

  • Work in ​​ventilated areas​​ to avoid inhaling styrene vapors (flashpoint: 31°C).

  • Wear ​​PPE​​ (gloves, goggles, respirators) to prevent skin/eye contact.

• ​​Mixing​​:

  • Use calibrated scales for catalyst ratios (1–3% MEKP). Over-catalyzing (>4%) causes brittleness.

• ​​Application​​:

  • Maintain mold temperature at 18–25°C; cold molds delay curing.

  • Apply 2–3 coats (300–600 μm total thickness) for optimal protection.

• ​​Storage​​:

  • Store in ​​HDPE drums​​ at 15–25°C. Shelf life: 3–6 months. Avoid freezing or direct sunlight.

​​4. Key Specifications​

​

​5. Applications​​

​​A. Marine Industry​​

• ​​Boat Hulls & Decks​​: Resists saltwater corrosion and UV degradation.

• ​​Offshore Platforms​​: Structural components exposed to seawater and hydrocarbons.

​​B. Automotive & Transportation​​

• ​​Body Panels & Spoilers​​: Lightweight composites for fuel efficiency.

• ​​Wind Turbine Blades​​: High impact resistance for harsh environments.

​​C. Construction​​

• ​​Sanitary Wares​​: Sinks, bathtubs, and shower enclosures.

• ​​Reinforced Concrete​​: Improves durability in corrosive climates.

​​D. Electrical & Electronics​​

• ​​Circuit Boards​​: Insulating coatings for high-performance electronics.

• ​​Transformers​​: Fire-resistant insulation materials.

​​E. Energy & Utilities​​

• ​​Desalination Plants​​: Corrosion-resistant coatings for membranes.

• ​​Solar Panels​​: UV-stable encapsulation for photovoltaic systems.

​​F. Consumer Goods​​

• ​​Furniture​​: High-gloss finishes for indoor/outdoor use.

• ​​Art & Decor​​: Artificial marble and onyx products.