Kimpok Technology Co., Ltd
| Payment Terms | T/T, Western Union,Paypal |
| Supply Ability | 3000pcs/month |
| Delivery Time | 7 Working Days |
| Packaging Details | International Standard Packing |
| Type | Wireless Video Transmitter |
| Channel | 8CH |
| Frequency | 1.7G(1680-1960MHz) |
| RF Power | 6W(PIT / 25mW / 800mW / 6000mW) |
| Protocol | IRC Tramp |
| Input Voltage | 7-36V DC |
| Brand Name | Kimpok |
| Model Number | KP-T1760 |
| Certification | CE |
| Place of Origin | China |
View Detail Information
Explore similar products
UAV COFDM Video Transmitter Wireless With 2W Lower Latency 50km Transmit
Long Range UAV Video Transmitter And Receiver 5.8Ghz 5800Mhz OEM
FPV UAV Wireless Av Sender , 5.8Ghz Video Transmitter 1200mW 1000-2500m Distance
20km LOS UAV Video Transmitter Lightweight Digital Wireless UGV Video Link
Product Specification
| Payment Terms | T/T, Western Union,Paypal | Supply Ability | 3000pcs/month |
| Delivery Time | 7 Working Days | Packaging Details | International Standard Packing |
| Type | Wireless Video Transmitter | Channel | 8CH |
| Frequency | 1.7G(1680-1960MHz) | RF Power | 6W(PIT / 25mW / 800mW / 6000mW) |
| Protocol | IRC Tramp | Input Voltage | 7-36V DC |
| Brand Name | Kimpok | Model Number | KP-T1760 |
| Certification | CE | Place of Origin | China |
1.7G VTX 1.9G VTX 6W Wireless Video Transmitter 20km Long-distance Image Transmission
I.Main Features
l Channels 8CH;
l Control Protocol: IRC Tramp, supports OSD tuning;
l Allows users to define custom frequencies within 1680-1960MHz using IRC Tramp tuning software;
l Power: PIT / 25mW / 800mW / 6000mW;
l Efficient DC/DC power input: 7-36V;
l Supports 5V voltage output;
l Supports installation on flight tower (30.5*30.5MM / M3 mounts)
II.Product Specifications
l Transmitter (Air Unit):
l Input Voltage: 7-36V DC (2-6S)
l Output Voltage: 5V/0.5A
l Weight: 21.5g (excluding antenna)
l Dimensions (L*W*H): 37mm*46mm*17.5mm (including SMA connector and fan)
l Video Format: PAL/NTSC
l Number of Channels: 8
lChannel Selection: Frequency adjustment button (short press to switch)
lTransmission Frequency: 8CH (see frequency table)
l Power Adjustment: Power button (short press to switch)
l Power Levels: 3 levels - 25mW / 800mW / 6000mW
lAntenna Connector: SMA (external thread, internal hole)
l Modulation Type: FM
III.Transmitter Operation Instructions:
1.Frequency Table
| CH1
1680 | CH2
1720 | CH3
1760 | CH4
1800 | CH5
1840 | CH6
1880 | CH7
1920 | CH8
1960 |
Note: Ensure good contact with antenna at 800mW and 6000mW levels. Poor connection may damage the amplifier.
2.Short press “ Power” button to choose the power level repeat short press for recycle from 25mW ,800mW,
6000mW . The green light is the power indicator light, and its status is shown in the following figure. It flashes once for 25mW, twice for 800mW, and three times for 6000mW. Press and hold for 3 seconds to enter PIT mode, with the green light constantly on.
The lights correspond to two power levels respectively. After setting the corresponding power, the corresponding lights remain on constantly.
IV.Precautions:
l Install the antenna before powering on to avoid device damage.
l Select the appropriate operating Frequency and set the transmitting end and the receiving end to the same frequency (for details, see Frequency Table);
l High power output – avoid touching the casing during operation to prevent burns (heating is normal).
l Casing can be removed to reduce weight, but may lower transmission power due to heat.
l Input voltage: 7-36V (2-6S); do not exceed this range.
l Output: 5V/0.5A. Ensure your camera stays within this limit. Exceeding may damage the power module.
l 5V and 5V-OUT are output ports. Do not connect to power input or batteries to avoid damage.
Company Details
Business Type:
Manufacturer
Year Established:
1998
Total Annual:
4 million-5 million
Employee Number:
100~150
Ecer Certification：
Site Member
Kimpok Technology is a leading of High-tech global enterprise in developing and manufacturing. Company established in 1998 and located in Shenzhen China. Specializing in the provision of advance wireless microwave communication system to the broadcast, UAV, public surverillance and defense industrie... Kimpok Technology is a leading of High-tech global enterprise in developing and manufacturing. Company established in 1998 and located in Shenzhen China. Specializing in the provision of advance wireless microwave communication system to the broadcast, UAV, public surverillance and defense industrie...
Get in touch with us
Leave a Message, we will call you back quickly!