Ningbo Suntech Power Machinery Tools Co.,Ltd.
| Payment Terms | L/C, T/T, Western Union, MoneyGram |
| Supply Ability | 6000pcs per month |
| Delivery Time | 25-30 days after Payment |
| Packaging Details | Exporting Cases |
| Name | Alternating-Current Load Switch |
| Altitude | Under 1000M |
| Ambient Temperature | -40℃-+40℃ |
| Usage | Electrical Site |
| Brand Name | Suntech |
| Model Number | FZ(R)N21-40.5 |
| Certification | ISO |
| Place of Origin | Ningbo,China |
View Detail Information
Explore similar products
Anti Pollution 70kN 140kV High Voltage Glass Insulator
3.3KV 10KN Electrical Composite Polymer Pin Post Insulators
Galvanised Carbon Steel Horizontal Standoff Insulator Fitting
89kN 33kV Max High Voltage Line Post Insulators
Product Specification
| Payment Terms | L/C, T/T, Western Union, MoneyGram | Supply Ability | 6000pcs per month |
| Delivery Time | 25-30 days after Payment | Packaging Details | Exporting Cases |
| Name | Alternating-Current Load Switch | Altitude | Under 1000M |
| Ambient Temperature | -40℃-+40℃ | Usage | Electrical Site |
| Brand Name | Suntech | Model Number | FZ(R)N21-40.5 |
| Certification | ISO | Place of Origin | Ningbo,China |
| High Light | Remote Control Vacuum Load Break Switch ，40.5KV Vacuum Load Break Switch ，40.5KV Indoor Load Break Switch | ||
40.5KV Remote Control High Voltage AC Indoor Vacuum Load Break Switch
FZ(R)N21-40.5D indoor high-voltage ac vacuum load switch-fuse combination ( "combination" for short) is used in power systems with an AC frequency of 50 Hz and a rated voltage of 40.5 kV to break load currents, overload currents and short-circuit currents. It particularly applies to the places needing control, protection for oilfree, maintenance-free, frequently-operated and ring network power supply units and terminal power supply transformers.
The combination is characterized by large breaking capacity, high safety and stability, long electrical life, support for frequent operation, less maintenance, etc. It has an apparent isolating gap, an earthing switch with making capability, an electric spring actuator and remote control capability.
1.1 Technical parameters
| ltem | Unit | Reference value | |
| Rated voltage | kV | 40.5 | |
| Rated frequency | Hz | 50 | |
| Rated maximum current of the fuse | A | 63 | |
| Insulation level | 1min power-frequency withstand voltage | kV | Vacuum gap, interpole, pole-to-ground: 95; isolating gap: 110 |
| Lightning impulse withstand voltage | kV | Vacuum gap, interpole, pole-to-ground: 185; isolating gap: 215 | |
| Rated peak withstand current | kA | 50 | |
| 4s rated short-time withstand current | kA | 20 | |
| Rated breaking current of the active load | A | 1250 | |
| Rated closed-loop breaking current | A | 1250 | |
| Rated breaking current of cable during charge | A | 21 | |
| Rated short-circuit breaking current | kA | 31.5 | |
| Rated transfer current | A | 1200 | |
| Fuse model | XRNT3A-40.5/Δ-31.5 | ||
| Output energy of the fuse striker | J | 2-5 | |
| Rated short-circuit making current | kA | 80(expected peak value) | |
| Rated peak withstand current of the earthing switch | kA | 50 | |
| 4s rated short-time withstand current of the earthing switch | kA | 20 | |
| Rated voltage (DC or AC) of the auxiliary circuit | V | 220;110 | |
| Mechanical life | Cycles | 10000 | |
1.2 Technical parameters of the vacuum load switch
| Item | Unit | Reference value |
| Gap of contacts | mm | 17±1 |
| Compression travel of the contact spring | mm | 4±1 |
| Average making speed | m/s | 0.6±0.2 |
| Average breaking speed(gap: 6mm) | m/s | 1.5±0.2 |
| Breaking time | ms | ≤60 |
| Non-synchronous making/breaking of contacts of the three phases | ms | ≤2 |
| Bounce time in contact making | ms | ≤3 |
| Distance between live parts and phase-to-ground distance | mm | ≥300 |
| Circuit resistance between the upper and lower brackets | μΩ | ≤80 |
| Product standards | 1. GB 16926- 1997 High-voltage alternatingcurrent load switch-fuse combinations 2. IEC 60420 High-voltage alteratingcurrent load switch-fuse combinations |
| Ambient condition | 1. The altitude: under 1000M. 2. The ambient temperature: -40℃-+40℃. 3. The relative humidity of air: monthly≤90%, daily≤95%. |
About us: Suntech Power Tools, which located in the southeast China, it is the earliest origin Power Tools Leading City in China.We are making the various related cable pulling tools, and hydraulic tension and puller to support the transmission work.All canaccept OEM and professionally produced per ISO 9001:2008, they are being sold to over more than 50 countries in the world,and has wined the best brand reputations. Some items like the stringing blocks,cable rollers,the cable jack stands,etc we can customized, and the Construction Safety Tools ,are not demanded the MOQ. You can freely help you out either
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller,Other
Year Established:
1995
Total Annual:
>300 Million
Employee Number:
>158
Ecer Certification：
Verified Supplier
Suntech Power Group is one of the largest Procurement, Engineering & Contracting Group companies in China.Our group branch company and factory have already engaged in the field of electric power more than 26 years. 1.Steel structure industry especially steel towers and related pr... Suntech Power Group is one of the largest Procurement, Engineering & Contracting Group companies in China.Our group branch company and factory have already engaged in the field of electric power more than 26 years. 1.Steel structure industry especially steel towers and related pr...
Get in touch with us
Leave a Message, we will call you back quickly!