Kjellberg Plasma Consumables Cathode .11.848.221.300 G002Y Silver Head

Product Specification

Kjellberg Cathode .11.848.221.300 G002Y Silver Head For Kjellberg Plasma Cutter Electrode
 
Kjellberg plasma cutting machine:HiFocus80i, HiFocus100i, HiFocus130i, HiFocus160i, HiFocus280i, HiFocus360i, HiFocus440i and so on
Kjellberg machine :PA-S20W, PA-S25W, PA-S40W, PA-S45W, PA-S70W, PA-S75, PB-S45W, PB-S47, PB-S75, PB-S76, PB-S77, PB-S80, Fine Focus450, Fine Focus800, Fine Focus900 and so on 
Electrode: M002, M012, M001, M011, S002Y, S012X, T012Y, S042, S052, G002Y, G032Y, G092Y, G015Y, G071, G052, G042 and so on.
Nozzle: M2006, M2007, M2008, M2009, M2010, M2112, R2007, R2008, R2009, R2010, R2011, R2012, S2006X, S2007X, S2008X, S2009X, S2010X, S2011X, S2012X, S2014X, S2016X, S2514X, S2516X, S2518X, S012X, S2112X, S2114X, S2116X, T2115, T2120, T2125, T2127, T2130, T2523, T2525, T2427, T2429, G2006Y, G2207Y, G2008Y, G2009Y, G2010Y, G2011Y, G2012Y, G2014Y, G2016Y, G2326Y, G2330Y, G2331Y, G2514Y, G2516Y, G2518Y, G2725Y, G2727Y, G2729Y.
Shanghai ZhouBo Welding & Cutting Technology company can offer you all plasma consumables for , Kjellberg, Esab, Koike, Komatsu, Thermadyne, such as: electrode, nozzle, shield, swirl ring, inner cap, retaining cap, water tube, torch body and so on.
 
 

 
Technical Support:
Main factors leading to serious waste of steel and supplies
 
CNC flame and plasma cutting machine at the beginning of a large number of industrial enterprises, CNC cutting machine manufacturers in the production of CNC machine tool design and manufacturing level gradually mature and stable. But in the CNC cutting machine hardware structure and manufacturing level of the same or similar circumstances, due to the lack of NC cutting software technology, NC cutting machine in use are common in the process of cutting the production efficiency is low, the steel and material waste are serious problems, the specific performance in the following aspects:
1. The numerical control system is not stable: user in the purchase of CNC cutting machine CNC system selection, blindly pursue civil computer high configuration, selection of windows system, high frequency CPU and hard disk, ignoring the stability of the numerical control system used in industry. Because of the high frequency CPU and hard disk power, high calorific value, especially in the summer, CNC system internal heat overheating, resulting in CNC system and cutting machine doesn't work, have to use the numerical control system for cooling industrial fan. In addition, the high frequency CPU must be equipped with a fan, and the fan is easy to wear and tear, limited life, easily lead to the CPU and motherboard damage, hard disk vibration damage to the track and infectious virus will cause instability of the NC system, leading to cut production stagnation.
2. without the use of nesting software: in the purchase of CNC cutting machine did not buy the nesting optimization software, only the use of CAD software and NC conversion software, drawing and NC cutting file, or is called NC system in the parts library, in the NC system of DXF or NC file manual process nesting, local cutting, CNC cutting machine most of the time in a waiting programming nesting in the idle state, greatly reduces the numerical control cutting machine production efficiency, also due to local steel plate cutting, produced a large number of surplus materials or surplus steel, steel leads to the serious waste.