PLC Controlled Industrial Water Treatment System Wall Mounted And Pure Water For

Product Specification

This is an industrial-grade water treatment system, usually used for commercial or industrial purposes to provide high-quality pure water

The following is a detailed introduction to the system:
1. Pretreatment unit: The transparent cylindrical water tank on the left side of the system may be a pretreatment unit, which is used to initially filter large particles of impurities in the water, such as silt, rust, etc.
2. Booster pump: The black pump body below the pretreatment unit is a booster pump, which is used to increase water pressure to ensure that the water can pass through the subsequent filtration and purification unit.
3. Multi-stage filtration system: The multiple water tanks and pipes in the system may represent a multi-stage filtration system, including: • Activated carbon filter: removes residual chlorine, odor and organic matter in the water. • Fine filter: further removes smaller particles. • Reverse osmosis (RO) system: removes dissolved salts, heavy metals, bacteria and viruses in the water through a semi-permeable membrane to provide high-purity water.
4. Control panel: The control panel above the system contains multiple buttons and indicators for monitoring and controlling the entire water treatment process. The panel may include a power switch, manual/automatic mode switch, alarm indicator, pressure gauge, etc.
5. Water storage tank: The system may contain one or more water storage tanks for storing purified water for use when needed.
6. Post-treatment unit: After the reverse osmosis system, there may be a post-treatment unit, such as a UV sterilizer or mineralizer, to further disinfect or adjust the water quality.
7. Pipes and valves: The pipes and valves in the system are used to control the direction and pressure of the water flow to ensure that the water can pass through each treatment unit according to the predetermined process. This water treatment system is suitable for occasions that require a large amount of pure water, such as pharmaceutical factories, laboratories, food processing, electronic manufacturing, etc. Through multi-stage filtration and reverse osmosis technology, the water quality is guaranteed to meet strict industrial standards.

Introduction:
Today, as water resources are increasingly scarce, [Dongguan Jingchuang Environmental Protection Equipment Co., Ltd.] is

committed to turning the vast ocean into a source of life and providing clean and safe drinking water to the world.

Seawater desalination equipment Ship island filtration drinking water water purifier subsea water filtration system

Commercial Seawater RO membrane filtration water treatment Plant is used to remove salt and purify water. This system

consists of booster pump, FRP/Carbon Steel pretreatment tanks (sand filter, activated carbon filter), cartridge filter

housing, chemical dosing systems, high pressure pump, FRP membrane pressure vessel, 2540 or 4040 membranes, control panel

and touch screen control.
Material and parts brand can be changes as regards to raw water quality and customer demand.
From touch screen panel, you can see all system flow diagram and automatic or manual control the system.
Membranes do not allow small particles, virus, bacteria to pass as a result your water becomes very clean and safe.

Note: Due to product specificity need to buy the pro please contact our customer service, customer service will be based

on the pro's water consumption and water quality problems to recommend the right products to the pro, in order to avoid

unnecessary future trouble please do not blindly buy equipment, such as the need for specific details of the

specifications and parameters or picture trouble pro contact customer service, we will answer the pro's questions, thank

you for the pro's support of the net environmental protection, thanks!