Seamless Pipe Fittings A234 WPB Forged 90 Degree Elbow 1/2-24 Inch

Product Specification

Shot Blasting 1/2-24 Inch A234 WPB 90 Degree Carbon Steel Elbow Pipe Fittings

Product Description:

For the butt Welded elbow , from the raw material division, we can divide the elbow into seamless elbow and erw elbow . From bend radius , we can divide the elbow in the LR elbow and SR elbow . According to the size and thickness ,we have American standard , Japan standard, DIN standard . Now we are mainly exporting the American standard .For the butt Welded elbow, we can get 24 inch seamless elbow and above 24 inch people will do two half elbow which need to weld the two half together . Now for the carbon steel elbow , we need the hot forming elbow machine to produce which use the induction heating machine .

Product Show

Company information:

Our company is producer and exporter of all kinds of carbon steel pipe fittings.Our city is the hometown of carbon steel pipe fittings.everyday lots of containers of fittings are dispached all over the world,such as Russia,Egypt,Malaysia,India,Turkey,Indonesia,Jordon and some other overseas markets.Our company monthly dispach around 50containers fittings.We provide our customers with one-stop service from order to delivery.

technical requirements

1. Since most pipe fittings are used for welding, in order to improve welding quality, the ends are beveled with a certain Angle and a certain edge. This requirement is also strict.The surface mass and mechanical properties are basically the same as the pipe.For the convenience of welding, the fittings are the same type of steel as the connected pipe.

2, that is, all the pipe fittings have to go through the surface treatment, the inner and outer surface of the oxidized iron sheet through the peening treatment, and then painted with anti-corrosion paint.This is for export needs, moreover, in the domestic is also for the convenience of transportation to prevent corrosion and oxidation, must do this aspect of the work.

3, is the requirement for packaging for small pipe fittings, such as exports, we need to make wooden cases, about 1 cubic meter, stipulated that the number of elbows in this kind of box can not exceed 1 ton, the standard allows the set, that is, large set small, but the total weight generally can not exceed 1 ton.For large pieces of y you need a single package, like 24 "you need a single package.Another is the packaging mark, mark is to indicate the size, steel, batch number, manufacturer's trademark.

Seamless elbow technology:

Carbon steel seamless elbow forming technology is to choose the special elbow pipe parts of the push machine, core mold and heating equipment, so that the blank on the mold in the push machine to move forward, in the movement of heating, expanding and zigzag forming process.Hot pushing elbow pipes deformation characteristics is based on volume before and after plastic deformation rule of metal materials concluded that tube billet diameter, chooses the pipe diameter is less than the diameter of the elbow pipe fittings, through core model control billet deformation process, the arc is tight spot metal activity, counter to other parts of the thinned by expanding, then get the uniform wall thickness of elbow pipe fittings.Hot push pipe fitting forming technology has the characteristics of beautiful appearance, uniform wall thickness and continuous work, suitable for mass production, so it has become the primary forming method of carbon steel, alloy steel and carbon steel elbow, and also applied in the forming of some standard stainless steel elbow pipe fitting.The heating methods of the forming process include medium frequency or high frequency induction heating (heating ring can be multi-turn or single turn), flame heating and reflective furnace heating. The choice of heating methods depends on the demand of the forming commodity and the power status of the decision.

Seamless elbow manufacturers

Contact me:

Darcy Dong

Whatsapp/ Wechat: 008615630731167

Guozhong International Limited