China factories

China factory - Pego Electronics (Yi Chun) Company Limited

Pego Electronics (Yi Chun) Company Limited

  • China,Yichun ,Jiangxi
  • Verified Supplier

Leave a Message

we will call you back quickly!

Submit Requirement
China IEC60529 IEC60598 IPX3 Environment Test Equipment Waterproof
China IEC60529 IEC60598 IPX3 Environment Test Equipment Waterproof

  1. China IEC60529 IEC60598 IPX3 Environment Test Equipment Waterproof

IEC60529 IEC60598 IPX3 Environment Test Equipment Waterproof

  1. MOQ: 1 set
  2. Price: USD2000~USD3000
  3. Get Latest Price
Payment Terms T/T, Western Union, MoneyGram
Delivery Time 15 working days
Packaging Details carton
Standard IEC60529, IEC60598
Material SUS304 stainless steel
Warranty 12 months
Shipment by sea
Product name waterproof Environmental Test Chambers
Configuration spray nozzle+control box
Brand Name PEGO GROUP
Model Number IPX34AS
Certification Third-Lab Calibration Certificate
Place of Origin China

View Detail Information

Contact Now Ask for best deal
Get Latest Price Request a quote
  1. Product Details
  2. Company Details

Product Specification

Payment Terms T/T, Western Union, MoneyGram Delivery Time 15 working days
Packaging Details carton Standard IEC60529, IEC60598
Material SUS304 stainless steel Warranty 12 months
Shipment by sea Product name waterproof Environmental Test Chambers
Configuration spray nozzle+control box Brand Name PEGO GROUP
Model Number IPX34AS Certification Third-Lab Calibration Certificate
Place of Origin China
High Light IPX3 Environment Test EquipmentIEC60529 Environment Test EquipmentWaterproof Environment Test chamber

IEC60529 IPX3 and IPX4 Brass Spray Nozzle Test Equipment (Built-in Water Tank)

 

Introduction

IEC60529 IPX3 and IPX4 brass spray nozzle test equipment is consisted by brass spray nozzle and control box (built-in water tank), IPX3/4 spray nozzle test equipment can meet the requirement of IEC60529 clauses 14.2.3 and 14.2.4 and figure 5, it is it is apply to verify the protection against spraying water (IPX3) and splashing water (IPX4) for large size sample. This equipment is to simulate the raining conditions to check the physical performance of outdoor luminaires, household appliance, auto parts and etc.

 

the counterbalanced shield is in place for IPX3 test, the water pressure is adjusted to give the specified delivery rate, the pressure to achieve this delivery rate will be in the range of 50kPa to 150kPa, and it should be kept constant during the test, the test duration is 1min/m2 of the calculated surface of the enclosure and with a minimum duration of 5 min. For IPX4 test, the counterbalanced shield is removed from the spray nozzle and the enclosure is sprayed from all practicable directions, the rate of water flow and the spraying time per unit area are same as IPX3 test.

 

 

 Specification

Outer size (L*W*H)

870mm*600mm*950mm (control box)

370mm*115mm*165mm (spray nozzle)

Spray nozzle diameter 102mm
Number of holes 121
Hole diameter Φ0.5mm
Holes position

1 hole at center

1 inner circles of 12 holes at 300 pitch

4 outer circles of 24 holes at 150pitch

Outer diameter of water inlet Φ16mm
Outer diameter of water pipe Φ28mm
Flow rate 10L/min±5%
Flowmeter adjustment method Manual adjustment
Water pressure range 50-150Kpa
Flowmeter display Glass flow meter
Capacity of water tank 150L
Working power 220V/50Hz
Water source

1). The user is required to configure a water source for the equipment at the installation site, with a water pressure not less than 0.2Mpa, and install a 4/8 inch faucet.

2). The faucet is not more than 2 meters away from the equipment

Requirement for the site The ground is level, the drainage is unobstructed, the ground and walls are waterproofed, and the floor drain or drainage ditch is set

 

Picture

 

 

Company Details

Bronze Gleitlager

,

Bronze Sleeve Bushings

 and 

Graphite Plugged Bushings

 from Quality China Factory
  • Business Type:

    Manufacturer,Distributor/Wholesaler,Exporter,Trading Company

  • Year Established:

    2014

  • Ecer Certification:

    Verified Supplier

Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs... Pego Electronics is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. Our business scope includes IP testing equipment, dust chamber, pendulum and vertical impact testing equipment, flame test apparatus,&nbs...

+ Read More

Get in touch with us

  • Reach Us
  • Pego Electronics (Yi Chun) Company Limited
  • No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China
  • https://www.electricalsafety-testequipment.com/

Leave a Message, we will call you back quickly!

Email

Check your email

Phone Number

Check your phone number

Requirement Details

Your message must be between 20-3,000 characters!

Submit Requirement