Ecer asks for your consent to use your personal data to:
Personalised advertising and content, advertising and content measurement, audience research and services development
Store and/or access information on a device
Your personal data will be processed and information from your device (cookies, unique identifiers, and other device data) may be stored by, accessed by and shared with 135 TCF vendor(s) and 65 ad partner(s), or used specifically by this site or app.
Some vendors may process your personal data on the basis of legitimate interest, which you can object to by do not consent. Contact our platform customer service, you can also withdraw your consent.
A10VO100EP2D/53R-VRC12K15 A10VSO18DR/31L-VSC62NOO A10VSO140DFLR1/31R-PPB12KO1AA10VSO71DFLR/31R-PPA12N00 A10VSO45DFR/31R-PPA12N00 German Rexroth variable piston fluid pump
hydraulic system
high pressure
electric
cast iron
construction machinery
hydraulic oil
variable
vertical
Rexroth
plunger pump
hydraulic
Edge standing
wooden box
nationwide
pipeline pump
Edge standing
plunger pump
Used in the mechanical industry
FAQ;
1. Basic Product Information
Q1: What type of product is the A10VSO45 pump, and what is its working principle?
A10VSO45 is an axial piston variable displacement pump with a swashplate structure, specifically designed for open-circuit hydrostatic transmission systems. Its working principle relies on adjusting the tilt angle of the swashplate: as the swashplate angle changes, the stroke of the pistons (which reciprocate in the cylinder block) is modified, thereby controlling the output flow of the pump.
Q2: What are the rated pressure and peak pressure of the A10VSO45 pump?
The rated pressure of the A10VSO45 pump is 280 bar, and the peak pressure (for short-term, intermittent operation) can reach up to 350 bar. Note that peak pressure should not be used continuously to avoid premature wear or damage to internal components.
2. Performance & Troubleshooting
Q1: What causes insufficient output flow or no oil discharge from the pump?
Common causes include three main categories:
Inadequate suction: This may result from excessive resistance in the suction line (e.g., undersized or overly long hoses), insufficient oil replenishment (e.g., pump speed exceeding the rated limit, low oil level in the tank), air leakage in the suction line (loose connections or damaged seals), or a clogged suction filter.
Excessive internal leakage: Possible issues include scratches on the valve plate, poor sealing of the check valve in the variable displacement mechanism, or sand holes/abrasion marks on the mating surfaces of the pump body and valve plate.
Mechanical misalignment: The swashplate may be set to a minimum tilt angle (resulting in minimal displacement), or the motor may be running in the reverse direction (preventing normal piston movement).
Q2: Why does the pump produce vibration and abnormal noise during operation?
Vibration and noise typically stem from two sources:
Mechanical issues: Misalignment between the pump shaft and motor shaft (critical for high-speed or high-power applications), damaged bearings in the rotating shaft or faulty couplings, or loose mounting bolts.
Wear-related noise: Excessive wear of the bushings at the variable displacement head. This often occurs if the pump is started without sufficient oil in the power unit (causing dry friction at the bushing interface) or if the lubricating oil is contaminated with impurities.
Q3: What leads to overheating of the A10VSO45 pump?
Overheating is usually caused by:
Mechanical friction: Increased friction between moving parts such as bearings, pistons, and the cylinder block (often due to wear, lack of lubrication, or misalignment).
Fluid friction: Excessive resistance in the oil flow path (e.g., narrow hoses, blocked valves) or turbulent flow inside the pump.
Excessive system pressure: A clogged oil filter can cause a pressure buildup in the system, forcing the pump to work under overload and generating excess heat.
Q4: Why does the pump still discharge oil when in the neutral position (zero-displacement setting)?
This issue is commonly caused by:
Malfunction of the displacement controller: The controller may be misaligned, loose, or damaged. In this case, re-calibrate the controller to the neutral position, tighten loose components, or replace the faulty controller.
Reduced angle retention force or wear: Insufficient force to keep the swashplate at zero tilt, or excessive wear on the swashplate’s trunnion (pivot point), causing the swashplate to maintain a small tilt angle even in neutral.
Company Details
Bronze Gleitlager
,
Bronze Sleeve Bushings
and
Graphite Plugged Bushings
from Quality China Factory
Business Type:
Manufacturer
Year Established:
2018
Total Annual:
1000000-2000000
Ecer Certification：
Site Member
Guang Zhou PMD Machinery Parts co ltd is a foreign trade company integrating development, sales, procurement, warehousing, transportation and service. Founded in September 2013, we have more than twelve years of experience in machinery trade.
Our main products are Excavator Hydraulic Sp... Guang Zhou PMD Machinery Parts co ltd is a foreign trade company integrating development, sales, procurement, warehousing, transportation and service. Founded in September 2013, we have more than twelve years of experience in machinery trade.
Our main products are Excavator Hydraulic Sp...
