BOTO GROUP LTD
| Payment Terms | L/C, T/T |
| Supply Ability | 10000 Set/Sets per Month |
| Delivery Time | 5-25 days |
| Packaging Details | wooden case |
| Chamber volume: | 225L |
| Humidity range: | 20%-98% RH |
| The heating rate (no load): | About 3℃/min |
| Precision of humidity control: | ±2%R.H |
| Analytical accuracy of temperature: | 0.01℃ |
| The cooling rate (no-load): | About 1℃/min |
| Chamber size: | 500 *750 *600mm(W* H *D) |
| Brand Name | BOTO |
| Certification | CE ISO |
| Place of Origin | China |
View Detail Information
Explore similar products
SUS304 Environmental Test Chambers Accelerated Weathering Tester 10RPM
CASS Environmental Test Chambers Salt Spray NSS Anti Corrosive
Vibration Combined Simulated Temperature Benchtop Environmental Test Chamber
50um IEC 60529 Environmental Test Chambers Sand Dust Resistance
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 10000 Set/Sets per Month |
| Delivery Time | 5-25 days | Packaging Details | wooden case |
| Chamber volume: | 225L | Humidity range: | 20%-98% RH |
| The heating rate (no load): | About 3℃/min | Precision of humidity control: | ±2%R.H |
| Analytical accuracy of temperature: | 0.01℃ | The cooling rate (no-load): | About 1℃/min |
| Chamber size: | 500 *750 *600mm(W* H *D) | Brand Name | BOTO |
| Certification | CE ISO | Place of Origin | China |
| High Light | Programmable Environmental Test Chambers ，225L Environmental Test Chambers ，6.0KW Environmental Test Chambers | ||
-70C - +150C Programmable Fast Thermal Temperature and Humidity Test Chamber 50-1000L Optional
Temperature humidity test chamber is used to test various types of materials for their tolerances of heat, cold, dry, humidity. It is applied for quality inspection for all types of electronic products, electric appliance, and products from communication, instrument, automobile, plastic, metal, food, chemical, building materials, medical and aerospace industries.
Features
1. The constant temperature and humidity test box is mainly composed of control panel, distribution panel, insulation layer, air supply fan, heater, humidifier and refrigeration unit. The main specifications can be divided into 6 standard sizes and 10 specifications under different conditions.
2. The controller can be connected to the computer through LAN interface. Users can design programs on the computer screen, collect test data and records, call program execution, remote control machine switch and other functions.
3. The use of multi-wing air supply fan strong air circulation, to avoid any dead angle, so that indoor temperature and humidity distribution is uniform.
4. Complete safety protection device, if abnormal conditions occur, the controller screen will automatically display the fault status, cut off the power switch, and provide troubleshooting methods.
Technical parameter
| Model | BT-50L | BT-80L | BT-225L | BT-408L | BT-800L | BT-1000L | |
| Inner chamber size (CM) | 35*45*35 | 50*40*40 | 50*60*75 | 80*60*85 | 80*100*100 | 100*100*100 | |
| Power (- 40 ℃) | 4.5(KW) | 5.0(KW) | 6.0(KW) | 7.0(KW) | 8.5(KW) | 9.5(KW) | |
| Performance
| Temperature range | A:-20℃~150℃ B:-40℃~150℃ C:-60℃~150℃ D:-70℃~150℃ E:-70℃~180℃ Customized temperature is available | |||||
| Humidity range | 20~98%R.H Customized humidity is available | ||||||
| Fluctuation / uniformity | ±1.5℃/±2℃ | ||||||
| Humidity deviation | ±3%R.H | ||||||
| Heating rate | About 1.0~3.0℃/min | ||||||
| Cooling rate | About 0.5~1.0℃/min | ||||||
| Control system
| Controller | "Temi" brand programming temperature instrument, HD real color LCD touch screen | |||||
| Accuracy range | Setting accuracy: temperature 0.1 ℃, humidity 1% R.H, Indication accuracy: temperature 0.1 ℃, humidity 1% R.H | ||||||
| Temperature and humidity sensor | Platinum resistor PT100Ω/MV | ||||||
| Heating system | Fully independent system, Ni Cr alloy electric heating heater | ||||||
| Humidification system | External isolation type, all stainless steel shallow surface evaporation humidifier | ||||||
| Dehumidification system | Adopt the dew point temperature laminar contact dehumidification method of evaporator coil | ||||||
| Water supply system | Humidification water supply adopts automatic control, and can recover residual water, save water and reduce consumption | ||||||
| Refrigeration system | French "Tecumseh" totally enclosed air-cooled single-stage or cascade compressor refrigeration mode | ||||||
| Circulation system | Motors with low noise and temperature resistance - multi blade centrifugal fans | ||||||
| Materials
| Outer box material | High quality carbon steel plates. Phosphorized electrostatic spray or SUS304 stainless steel | |||||
| Inner box material | Stainless steel high quality mirror plate | ||||||
| Thermal insulation material | Polyurethane rigid foam / superfine glass fiber wool | ||||||
| Door frame insulation | Double layer high and low temperature aging resistant silicone rubber door sealing strip | ||||||
| Standard configuration | Multi layer heating defrosting with lighting glass window 1 set, test sample rack 2, test lead hole 1 | ||||||
| Safeguard | Leakage, short circuit, overtemperature, water shortage, motor overheating, compressor overpressure, overload, overcurrent protection | ||||||
| Supply voltage | AC220Vor 380V±10% 50±0.5Hz | ||||||
| Operating ambient temperature | 5℃~+30℃ ≤85%R.H | ||||||
Product Images
Company introduction
Production Details
Our customers
Packing&Shipping
Main product
Our Services
During the whole business process, we offer Consultative Selling service.
1) Customer inquiry process:
Discussing testing requirements and technical details, suggested suitable products to customer to confirm. Then quote most suitable price according to customer requirements.
2) Specifications customize process:
Drawing related drawings to confirm with customer for customized requirements. Offer reference photos to show the products appearance. Then, confirm the final solution and confirm final price with customer.
3) Production and delivery process:
We will produce the machines according to confirmed PO requirements. Offering photos to show production process.
After finish production, offer photos to customer to confirm again with the machine. Then do own factory calibration or third party calibration(as customer requirements). Check and test all the details and then arrange packing.
Deliver the products in confirmed shipping time and inform customer.
4) Installation and after sale service:
Defines installing those products in the field and providing after-sales support.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2008
Total Annual:
5000000-80000000
Employee Number:
100~500
Ecer Certification：
Verified Supplier
BOTO GROUP LTD. Is a professional manufacturer of environmental test equipment and test service integrating design, research and development, production, sales, service and construction.The company is located in anting town, jiading district, Shanghai, next to saic Volkswagen motor city. Th... BOTO GROUP LTD. Is a professional manufacturer of environmental test equipment and test service integrating design, research and development, production, sales, service and construction.The company is located in anting town, jiading district, Shanghai, next to saic Volkswagen motor city. Th...
Get in touch with us
Leave a Message, we will call you back quickly!