OPTO Mosfet RC Boat ESC HV 16S 240A With Program Software 80V Capacitor

Product Specification

OPTO Mosfet RC Boat ESC HV 16S 240A With Program Software 80V Capacitor
 
 
 
Basic information:

 
 
Feature:
 
The firmware is upgraded recently .
 
ESC Max voltage is 16S, 1S=4.2V.
 
Two way communication while connecting it with computer.
 
The unmanned electromechanical adjustment has a total of five lines. 3 at one end, 2 at the other end, 3 with the motor connected to 3 lines, no matter whether it is positive or negative.
 
As long as the direction of rotation is reversed, any two wires can be exchanged. The other two are power cords, which are directly connected to the battery. Forgot to have a thin servo plug, this is directly connected to the flight controller or receiver.
 
Setting function value:
 

1. Reverse: On/Off.
2. Timing:0°,1°,2°,3°,4°……30°.
3. Frequency: 8KHz, 16 KHz, 32 KHz.
4. Acceleration: Soft / Medium / Hard.
5. Accumulator type:NiCd/NiMh,Li-Ion/Li-Pol,LiFe.
6. NiCd/NiMH CUTOFF:×0.05,0.4V,0.5V,0.6V,0.7V,0.8V,0.9V,1.0V.×0.05 means the cut off voltage is 5% the voltage while connecting.
7. Number of cells:Auto,2S,3S,4S,5S,6S,7S,8S,9S,10S,11S,12S,16S.
8. LiIo/Pol CUTOFF:2.0V,2.1V,2.2V,2.3V,2.4V,2.5V,2.6V,2.7V,2.8V,2.9V,3.0V,3.1V,3.2V,3.3V,3.4V,3.5V,3.6V.
9. LiFe cutoff:2.2V,2.3V,2.4V,2.5V,2.6V,2.7V,2.8V
10. Cut Off Type::Slow down,Hard. l
11. Power limited forward: Off, 75%, 50%, 25%.
12. Power limited reverse: Off, 75%, 50%, 25%.
13. Delay time when direction convert: 0.25S, 0.5S, 0.75S, 1S, 1.5S, 2S, 3S, 5S.
14. Reverse point:Auto,fixed 1.0mS,fixed 1.1mS,fixed 1.2mS,fixed 1.3mS.
15. Forward point:Auto,fixed 1.7mS,fixed 1.8mS,fixed 1.9mS,fixed 2.0mS.
16. Throttle curve: Logarithmical,Linear,Exponential.
17. Rotation direction: Left, Right.
18. Timing monitor (TIMING MONTITOR): ON, Off.
Note:the red mark is the factory default value,you can setting function value by youself.

Updating the firmware

1,Plugging the USB Linker wires ,be sure that the USB linker wires driver was installed,
2 .Running the software, click the "Flash" button. after a "Download ESC type OK"
message displays in the text box, you can reboot the software. (the second step must be
done, if not, the firmware types which you need for the ESC can't be recognized).
3. Choose the correct port from "Select COM Port",
4. Choose the firmware which you need, the next step is click "Down Load File" button.
"File read OK!" message will appear.
5. Disconnect the power of the ESC and BEC.
6. Plugging 4pin of the ESC into the 4 pin of USB Linker. "connect OK, Pl....." message will
appear.
7. If any errors pull out 4pin wires then repeat step 6 still correct message.
8. Clicking "Write" button. the ESC will be updated software now.
9. Waiting, until "update to 113 pages, errors pages 0....." appear, tell you the updated
software succeed.
10. You can disconnect the 4pin of the ESC from the USB Linker now
 

Pictures:

 
 
Trade Terms:
 
1.Payment :T/T ,Paypal,West union .
 
2.Production lead time :5 days for 100-200 pcs ,10days for 200-300pcs .
 
3.Sample can be delivered within 3 days.
 
4.Discounts are offered based on order quantities .
 
5.MOQ: 2 pcs.
 
Shipping&Return:
 
1. Items will be shipped within 3 business day after payment completed received.
 
2. Items are shipped from DHL Express ,UPS ,EMS,, reach most of the countries within 3-7 days respectively.
 
3. Warranty Period is 2 yrs for this item.
 
4. If product can not work, or find it as defects within in 7 days after receipt, please contact us, we will replace or refund.
5. All emails will be answered within 1 working day.