Shenzhen KHJ Technology Co., Ltd
| Payment Terms | D/P, D/A, L/C |
| Supply Ability | 100000 |
| Delivery Time | 7 day |
| Brand Name | khj |
| Certification | TDS |
| Place of Origin | China |
View Detail Information
Explore similar products
12mm Width Semiconductor Packaging tape with High Tensile Strength
High Adhesive Strength Semiconductor Packaging Tape for Pressure Sensitive
1000m Length Semiconductor Protective Tape with High Elongation
Pressure Sensitive Semiconductor Packaging tape High UV Resistance and 0.05mm
Product Specification
| Payment Terms | D/P, D/A, L/C | Supply Ability | 100000 |
| Delivery Time | 7 day | Brand Name | khj |
| Certification | TDS | Place of Origin | China |
Part I Product and Company Identification
| polymide tape |
IH852 E1-IH803 produced at SHENZHEN KHJ TECHNOLOGY CO. LTD is named and located at KHJ industrial Park Building 1 Chuangxin Industrial Park of Xintian district.
Community Guanlan of Longhua New District in Shenzhen China) can contact (86)755- 28102935 in order to identify data regarding its composition (CAS #, Content (%) of silicone adhesive trade secret, Pi No's from 73 to 75 and Others being no higher than 1.5 for further safety considerations and hazards assessment purposes. - Hazard Class & Summarizing- Non Dangerous Article.
Invasion Methods: Inhalation,Ingestion and Eye/skin Touch Whilst Proper use and storage will not generate toxic gases that emit unpleasant odors when inhaled; any chemical gas released from burning should be immediately exhaled, otherwise seek medical advice if feeling sickly.
Eye/skin contact : Clean the area thoroughly using soapy water before laundering contaminated clothing or taking other steps such as removal and laundering; seek medical assistance immediately if irritation develops or persists; for ingestion use an emetic and contact a medical provider immediately ; no environmental risks occur
Eye/Skin Touch:No Effect Absorption :Product is Solid
Ingestion :Retort with Emetic Inducement immediately and see your physician immediately (Emetics may result). Doctor Notes :Doesn't Require Special Protection.
Harmful Combustion Products Carbons :Monoxide and Carbon Dioxide.
Fire Extinguishing Agent :Dry Powder/carbon Dioxide Foam. Burning Touch Damage:None unusual fire/explosion hazards were detected; Protection equipment:Wearing Full Bunker Gear with SCBA for protection purposes was required for safe operations.
Part 6 - Leakage Emergency Treatment/ Solutionssolid, without leakage
Part 7 : How to operate and store
Avoid skin contact with hot objects when possible and store in dry, shaded environments to minimize sun glare.
Maximum Allowable Concentrations for Solid Products are Nonapplicable
Respiratory System Protection does not need special protection; Eye and Body protection do not necessitate special precaution. In any other regard no special safeguarding measures need to be put in place either
Physicochemical Features
| Properties: | Solid roll material |
| Color: | Amber |
| Smell : No special smell | |
| PH Value: | Not Application |
| Melting Point (C): | Not Application |
| Boiling Point (C): | Not Application |
| Autoignition property : Not Application | |
| Flash Point (C): | Not Application |
| Ignite Temperature (C): Not Application | |
| Explode Limit: | Not Application |
| Dissolubility: | Not Application |
| Other Physicochemical Features : No Special Notice | |
Part 10 Stability and Reactivity, for the purposes of Part 11 is as follows. Assume stability : Stable; Conditions to Avoid are:Open fire, high temperature environments that easily cause burning; Aggregation Hazard is Non; Decay Products are Carbon Monoxide/Carbon Dioxide emissions.
Part 11 Toxicology Data Toxin Level = N/A Sensitization =N/A
Carcinogenicity =N/APart 12 Ecology Data Toxicity Level is Non Available
Biodegradation Property = Non Availabable Organism Accumulate Property= - Non Biodegradation property= No data available
Waste Property : Natural degradation WTP Methodology : Dispose in accordance with Federal, state and provincial regulations
Part 14 Transport Information. A non hazardous product would fall within Class of Risk; No Dangerous Goods Data Available and Packing Mark not present, therefore not needing special packaging methods or methods of shipment.
Applicative Rule: ISO14001
Company Details
Business Type:
Manufacturer,Trading Company,Seller
Year Established:
1999
Total Annual:
1800000-20000000
Employee Number:
200~300
Ecer Certification：
Site Member
Shenzhen KHJ Technology Co., Ltd was established in 1999 engaged in R&D, manufacturing and marketing of ESD adhesive products, with years experience in this field, KHJ has achieved a number of patents & core technology, we offer customized adhesive solution to meet customer's special req... Shenzhen KHJ Technology Co., Ltd was established in 1999 engaged in R&D, manufacturing and marketing of ESD adhesive products, with years experience in this field, KHJ has achieved a number of patents & core technology, we offer customized adhesive solution to meet customer's special req...
Get in touch with us
Leave a Message, we will call you back quickly!