Sinuo Testing Equipment Co. , Limited
| Payment Terms | T/T |
| Supply Ability | 30 sets/month |
| Delivery Time | 20 days |
| Packaging Details | Plywood Case |
| Applied Table | Table 5 |
| Applied Figures | Fig13, Fig14 |
| Applied Standard | IEC 62196-1 |
| Applied Clauses | Clause 14.1.5, 14.1.6 |
| Weight Configuration | 165-750N |
| Operation Method | Manual Operation |
| Test Station | Single Station |
| Test Plugs | Customized |
| Brand Name | Sinuo |
| Model Number | SNQC1013 |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC62196 Electric Vehicle Connector Plug Drive Over Test Equipment 5000N
IEC62196 EV Connector Testing Equipment Plugs Temperature Rise Test System
EV Glow Wire Test Apparatus PLC Control IEC 62196 Glow Wire Test Equipment
IEC 62196 Electric Vehicle Air Saturated Test Chamber 304 Stainless Steel
Product Specification
| Payment Terms | T/T | Supply Ability | 30 sets/month |
| Delivery Time | 20 days | Packaging Details | Plywood Case |
| Applied Table | Table 5 | Applied Figures | Fig13, Fig14 |
| Applied Standard | IEC 62196-1 | Applied Clauses | Clause 14.1.5, 14.1.6 |
| Weight Configuration | 165-750N | Operation Method | Manual Operation |
| Test Station | Single Station | Test Plugs | Customized |
| Brand Name | Sinuo | Model Number | SNQC1013 |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | EV charging connector tester ，EV socket withdrawal force tester ，mechanical endurance test equipment | ||
EV Charging Connector Mechanical Endurance Test EV Socket Withdrawal Force Tester
Complied Standards & Clauses
This test equipment conforms to IEC 62196-1:2022 clause 14.1.5, 14.1.6, fig13, fig14.
Equipment Overview
It is used to check the withdrawal force required when the test plug is withdrawn from the socket-outlet and latching device.
A Withdrawal force
The switched EV socket-outlet or switched vehicle connector with interlock is fixed to the support of the apparatus shown in Figure 13 of IEC62196-1:2022 that the axis of separation is vertical, and the movement of mating accessory is downwards.
The withdrawal force of the socket-outlet shall meet the requirements of following Table. The weights are included.
B.1 Apparatus for checking the withdrawal force:
This device is mainly composed of the installation fixture, the clamping device, principal weight, supplementary weight and the test plug. Based on experience, the pull clamp is changed to a counterweight, the weight hook is directly connected to the test plug, and the fixture for holding the sample is configured. The specific shape is shown in figure 1.
Technical Parameters
| Standard | Figure No.: | Name |
| IEC62196-2/Ed.3/CDV © IEC(E) | STANDARD SHEET 2-I sheet 1 | Test-plug:32A,250 V AC VEHICLE INLET |
| IEC62196-2/Ed.3/CDV © IEC(E) | STANDARD SHEET 2-Ilb sheet 1 | Test-plug:63 A, 480 V THREE-PHASE OR 70 A, 250 V SINGLE PHASE |
| IEC62196-3/Ed.2/CDV © IEC(E) | STANDARD SHEETS CONFIGURATION BB VEHICLE COUPLER 250 A 900 V DC STANDARD SHEET 3-Iia Sheet 1 | Test VEHICLE CONNECTOR |
| IEC62196-2/Ed.3/CDV © IEC(E) | STANDARD SHEET 2-Ild sheet 1 | Test-VEHICLE INLET: 63 A, 480 V THREE-PHASE OR 70 A, 250 V SINGLE PHASE |
| IEC62196-3/Ed.2/CDV © IEC(E) | STANDARD SHEET 3-Ivb VEHICLE INLET ALL MODES Sheet 1 | Test VEHICLE INLET |
| IEC62196-2/Ed.3/CDV © IEC(E) | STANDARD SHEET 2-Illa sheet 1 | Test-Plug: 16 A, 250 V SINGLE-PHASE PLUG WITH 1 PILOT CONTACT |
| IEC62196-2/Ed.3/CDV © IEC(E) | STANDARD SHEET 2-Illa sheet 3 | Test-VEHICLE INLET : 16A, 250V SINGLE-PHASE VEHICLE INLET WITH 1 PILOT CONTACT |
| IEC62196-2/Ed.3/CDV © IEC(E) | STANDARD SHEET 2-Illb sheet 1 | Test-Plug : 32 A, 250 V SINGLE-PHASE PLUG WITH 2 PILOT CONTACTS |
| IEC62196-2/Ed.3/CDV © IEC(E) | STANDARD SHEET 2-Illb sheet 3 | Test-VEHICLE INLET : 32A, 250V SINGLE-PHASE VEHICLE INLET WITH 2 PILOT CONTACTS |
| IEC62196-3/Ed.2/CDV © IEC(E) | STANDARD SHEET 3-IIIa Sheet 2 | Test VEHICLE INLET |
| IEC62196-2/Ed.3/CDV © IEC(E) | STANDARD SHEET 2-Illc sheet 3 | Test-VEHICLE INLET: 63 A, 480 V THREE-PHASE VEHICLE INLET WITH 2 PILOT CONTACTS |
| IEC62196-3/Ed.2/CDV © IEC(E) | STANDARD SHEET 3-Ib Sheet 1 | Test VEHICLE CONNECTOR |
| IEC62196-2/Ed.3/CDV © IEC(E) | STANDARD SHEET 2-Ilf sheet 1 | Test-VEHICLE INLET: 63 A, 480 V THREE-PHASE OR 70 A, 250 V SINGLE PHASE |
| IEC62196-3/Ed.2/CDV © IEC(E) | STANDARD SHEET 3-Iva VEHICLE INLETMODES 2, 3 AND 4 Sheet 2 | Test VEHICLE INLET |
| IEC62196-2/Ed.3/CDV © IEC(E) | STANDARD SHEET 2-Illc sheet 1 | Test-Plug : 63 A, 480 V THREE-PHASE PLUG WITH 2 PILOT CONTACTS |
Company Details
Business Type:
Manufacturer
Year Established:
2019
Employee Number:
<100
Ecer Certification：
Verified Supplier
Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te... Sinuo Testing Equipment Co., Limited established in 2019, but Sinuo has rich experience in manufacturing test euipment, test system and offering overall laboratory construction of electronic and electrical products. Sinuo's main products include electrical vehicle te...
Get in touch with us
Leave a Message, we will call you back quickly!