Chamfered Threaded Galvanized Pipe High Strength Easy Install Industrial

Product Specification

Chamfered Threaded Tube High Strength Easy-Install Industrial Pipeline Connector

I. Basic Parameters and Structural Design

1. Dimensional Specifications:
   • Thread Type: Commonly adopts NPT (60° tapered thread) or BSPT (55° sealed tapered thread), with nominal diameters ranging from 1/8" to 2" .
   • Chamfer Design: The tube end features a 45° chamfer (edge-cut) with a width of 1-3mm, facilitating alignment during installation and reducing burrs .
   • Material: High-strength carbon steel (e.g., Q235) or stainless steel (304/316), surface-treated with galvanization or nickel plating for corrosion resistance .
2. Structural Features:
   • Threaded Connection: Integral external threads, precision-machined to ensure tight fit with mating components (e.g., couplings, flanges) .
   • Separable Design: Some models allow disassembling the tube body and threaded sleeve for flexible installation in confined spaces .

II. Technical Performance

1. Load Capacity:
   • Working Pressure: Up to 1.6-2.5MPa (NPT threads) or 2.0-4.0MPa (BSPT threads), depending on material thickness .
   • Temperature Range: -20°C to +120°C (standard), with high-temperature variants available for up to +200°C .
2. Surface Treatment:
   • Zinc Plating: Thickness ≥5μm, salt spray resistance ≥24 hours .
   • Anodizing (aluminum alloy): Hardness ≥12HV, suitable for outdoor or corrosive environments .

III. Application Fields

• Industrial Machinery: Pipe connections in hydraulic systems, pneumatic equipment, and mechanical transmission devices .
• Lighting Fixtures: Structural connectors in LED track lights and ceiling lamps, combining heat dissipation with mechanical fixation .
• Automotive & HVAC: Engine oil pipelines, refrigerant lines, requiring vibration resistance and leak-proof performance .

IV. Design Advantages

1. Installation Efficiency:
   • The chamfered edge simplifies insertion into fittings, reducing alignment time by 30% compared to non-chamfered tubes .
   • Compatible with standard wrenches or automated assembly tools for quick installation .
2. Reliability:
   • Precision threading ensures minimal leakage (<0.01MPa pressure drop) when paired with sealing tapes or gaskets .
   • Heat-treated materials enhance fatigue resistance, extending service life by 20% under cyclic loading .

V. Maintenance & Installation Guidelines

1. Inspection:
   • Regularly check thread integrity for corrosion or deformation, especially in high-moisture environments .
   • Measure chamfer wear with a caliper; replace if deviation exceeds ±0.5mm .
2. Assembly:
   • Apply PTFE tape or thread sealant to tapered threads for leak-proof connections .
   • Use torque wrenches to avoid over-tightening (recommended torque: 8-15N·m for 1/2" threads) .
3. Storage:
   • Store in dry conditions, sealed with anti-rust paper or plastic caps to prevent oxidation .

VI. Typical Application Cases

• LED Track Lighting: The edge-cut tooth tube (M10x1 thread) securely connects lamp heads to tracks while dissipating heat, supporting load-bearing up to 5kg .
• Hydraulic Systems: A 3/4" NPT tooth tube withstands 1.8MPa pressure in excavator boom joints, ensuring stable operation under impact load .

VII. Technical Parameter Table