High Speed Excavator Bearings AC5033 Angular Contact Ball Bearing Corrosion

Product Specification

AC5033 Angular Contact Ball Bearing For Excavator & Heavy Machinery

In the complex operation system of construction machinery, bearings, as key components, directly affect the operation efficiency and service life of the equipment. The AC5033 bearing, with its excellent design and outstanding performance, occupies an important position in excavators and other heavy machinery and equipment, providing a solid guarantee for the stable operation of the equipment.​

I. Precisely Adapted Dimensional Specifications​

​

​

1. Inner Diameter: The inner diameter of the AC5033 bearing is precisely set to 250mm. This dimension has undergone precise calculation and strict testing, enabling it to perfectly match the specific shaft diameter of equipment such as excavators. The tight and accurate fit ensures that there is no relative sliding between the bearing and the shaft when the equipment is running at high speed and under high-intensity loads, thus ensuring stable and efficient power transmission and laying a foundation for the smooth operation of the equipment.​

2. Outer Diameter: The 330mm outer diameter design not only endows the bearing with sufficient structural strength to cope with various stresses under complex working conditions but also fully considers the compatibility with the installation dimensions of other related components of the equipment. This compatibility ensures the compact layout and coordinated operation of the entire mechanical system, allowing all components to work closely together, thereby improving the overall operation efficiency of the equipment.​

3. Thickness: Its thickness is 37mm, which is determined after comprehensively considering the axial load-carrying capacity of the bearing and the limited installation space inside the equipment. Within the limited space, this thickness can not only effectively bear axial force to prevent axial movement of the shaft during operation, which affects the operation accuracy of the equipment but also will not hinder the normal installation and operation of other components due to excessive size, achieving an optimal balance between performance and space utilization.​

II. Efficient and Stable Structural Type​

The AC5033 bearing belongs to the angular contact ball bearing type, and this structural design gives it unique performance advantages. The special arrangement of angular contact balls enables the bearing to bear both large radial and axial loads at the same time, which is particularly suitable for equipment such as excavators that face complex force conditions during operation. Its contact angle is usually carefully designed and generally in a specific angle range, which makes the bearing perform excellently in bearing axial force, able to effectively cope with the large one-way axial force generated by the equipment during work, and ensure that the equipment can run stably under various working conditions. At the same time, under high-speed operation conditions, the structural characteristics of angular contact ball bearings help maintain a low friction coefficient, reduce energy loss, lower operating noise, and thus ensure efficient and smooth operation of the equipment.​

III. High-Quality and Reliable Material Technology​

1. Bearing Material: The bearing is made of high-quality bearing steel as the raw material. Bearing steel has extremely high hardness. After a special heat treatment process, its hardness can reach the ideal level, generally up to HRC60-65. This enables the bearing to maintain good shape and dimensional stability when bearing heavy loads and high-frequency operation for a long time, effectively resist wear, and greatly extend the service life. At the same time, bearing steel also has excellent toughness, which can avoid brittle fracture when bearing impact loads, ensuring that the bearing works reliably under complex working conditions.​

2. Processing Technology: In the manufacturing process, the AC5033 bearing adopts advanced precision processing technology. Every link, from the cutting and forming of raw materials to the processing of raceways and rolling elements, is strictly controlled. The processing accuracy of the raceway is extremely high, and the surface roughness is very low, which makes the rolling elements roll more smoothly in the raceway, effectively reducing friction and vibration, and further reducing energy loss and noise generation. In addition, to improve the corrosion resistance of the bearing, its surface is also subjected to special anti-rust treatment, which enables it to run stably for a long time in harsh environments such as humidity and dust, adapting to the common working environment of construction machinery such as excavators.​

IV. Outstanding Performance Advantages​

1. High-Speed Performance: Thanks to its precise structural design and high-quality material technology, the AC5033 bearing performs excellently in high-speed operation. In the traveling mechanism of excavators and other components that need high-speed rotation, the bearing can maintain a stable operation state at high speed, effectively reducing the impact of centrifugal force generated by high-speed rotation on the bearing performance. Its low friction coefficient and good lubrication performance enable the heat inside the bearing to be dissipated in time during high-speed operation, avoiding performance degradation due to overheating, and ensuring the reliability and stability of the equipment during high-speed operation.​

2. Corrosion Resistance: In view of the harsh working environment that construction machinery often faces, the AC5033 bearing fully considers corrosion resistance factors in the design and manufacturing process. In addition to using high-quality corrosion-resistant bearing steel materials, the special anti-rust treatment on its surface further enhances the corrosion resistance of the bearing. Whether in a humid construction site or an industrial environment containing corrosive substances, the bearing can effectively resist the erosion of moisture, chemical substances, etc., maintain good working performance, reduce the frequency of failures caused by corrosion, reduce the maintenance cost of the equipment, and improve the use efficiency of the equipment.​

V. Wide and Diverse Application Scenarios​

1. Excavator Traveling Mechanism: In the traveling system of excavators, the AC5033 bearing plays a vital role. It is installed in key parts such as traveling motors and drive wheels, bearing the huge radial and axial loads generated by the excavator during traveling. With its excellent load-carrying capacity and high-speed performance, it can ensure that the excavator moves stably and flexibly on various complex terrains, providing reliable power transmission and support for excavation operations.​

2. Excavator Slewing Mechanism: Similarly, the AC5033 bearing is also an indispensable component in the slewing mechanism of excavators. It is responsible for supporting the slewing movement of the upper structure of the excavator and bearing the alternating loads and axial forces generated during the slewing process. Its high-precision processing and stable performance ensure the smooth and accurate slewing action, enabling the excavator to accurately carry out material loading, unloading, and excavation operations, improving work efficiency and accuracy.​

3. Other Heavy Machinery and Equipment: In addition to excavators, the AC5033 bearing is also widely used in other similar heavy machinery and equipment, such as loaders and cranes. In the transmission system of loaders, it helps transmit power to realize the forward, backward, and steering actions of the vehicle; in the slewing and hoisting mechanisms of cranes, the bearing can bear huge loads, ensuring that the crane can lift and transport heavy objects safely and stably. Its application in different types of heavy machinery and equipment fully reflects its versatility and reliability.​

To sum up, the AC5033 bearing, with its precise dimensional specifications, efficient and stable structural type, high-quality and reliable material technology, outstanding performance advantages, and wide and diverse application scenarios, has become a trusted key component in the field of construction machinery. It provides strong support for the efficient and stable operation of various heavy machinery and equipment and promotes the continuous development and progress of the engineering construction industry.​