RHB325 RHB330 RHB340 Hydraulic Breaker Front Head RHB325 Hydraulic Breaker

Product Specification

RHB325 RHB330 RHB340 Hydraulic Breaker Front Head RHB325 Hydraulic Breaker Hammer Spare Parts 

Hydraulic breaker parts such as chisels/moil points/blunt tools, seal kits & diaphragms
for almost all kinds of hydraulic breakers/hammers. Breaker/hammer pistons, cylinder bushes, side bolt, through bolt, front cover & accumulator etc Chisel pin and stop pin is to stop chisel falling and prevent drop of front cover and bush.

1. Hydraulic Breaker Parts

1). Flat pin, flat pin(with hole) and pin cotter

2). Retainer pin/stop pin/locating pin

3). Material: 40CrMo and 42CrMo

4). Heating processing technology: Quench and Tempe

5). Surface Treatment: Cold/Hot Zn Plating, Blackening Treatment(Salt Spray Test 48-96 hours), Ni Plating, Cr Plating, Spraying Undercoat, Anti-Rust Paint, Surface Paint, Plastic Paint. Coated Anti-Rust Water, Anti-Rust Oil, etc.

6). Dimension Inspection: Calipers, Height Gauge, Micrometer Calipers, Inside Caliper Gauge, Angle and R Gauge, three coordinates Measuring instrument.

Why Choose Us

Cylinder Material
Choose the best Material 20 CrMo 40 CrMo 42Crmo, The material of the middle cylinder is made of 20crmo, and is processed by a high-precision CNC center; after the processing is completed, it undergoes three hot water treatments and three cold treatments; the matching tolerance of the piston and the middle cylinder is within 5-7 wires, and each middle cylinder Both the piston and the piston are cold treated with liquid nitrogen to prevent the cylinder from expanding due to excessive oil temperature and cannot be used normally.

High quality hammer shell and splint
The material used for the hammer shell and splint is wear-resistant, manganese steel material, which is welded by robots to ensure that it will not crack within one year.We use high-precision product matching, and the matching tolerance is within 1-5 wire, which fully guarantees the hammer's striking strength.The material of the whole body bolt and splint bolt is 42crmo, and each one is heat-treated to prevent each bolt from being elongated and deformed.

Hydraulic Breaker Spare Parts

Breaker hammer parts we have

Hydraulic Breaker Chisel
The chisel is a special accessory installed on the hydraulic breaker. It uses the impact energy generated by the breaker piston to transfer the impact energy to the object to be broken by striking the chisel, causing it to crack and break.
Feature: 1. Super wear-resistant
2. low failure rate
3. long life
Hydraulic Breaker Rod Pin
The function of the rod pin is to control the displacement of chisel and enhance the durability of the chisel.
Our rod pins are made of high-quality steel, which is more durable and wear-resistant.
Hydraulic Breaker Piston
The piston is the impact mechanism of the breaker and also the most important component of the breaker.
Feature:
1. Strong wear resistance
2. Good corrosion resistance
3. High tensile strength
4. Good heat resistance
5. Good maintenance performance

Hydraulic Breaker Through Bolt
Bolts are subject to high load, high impact and high wear during the operation of the breaker, so they must be made of high-quality alloy steel with high strength and toughness to meet the use requirements.
Hydraulic Breaker Bush
The Bush are in direct contact with the front cylinder and the chisel, reducing the wear of the drill rod and the front cylinder;
They have a direct guiding effect on the chisel.

If you can't find the part you are looking for please feel free to contact us, we will respond to you quickly according to your inquiry.

FAQ

Q: Are you sure your product will fit my breaker?
A: Our equipments are suitable for most breakers. Show us your hammer model, we'll confirm the solution.

Q: How about your products warranty?
A: We offer a 12-month warranty for the hydraulic breaker.

Q: Can you produce according to customers' design?
A: Sure, OEM/ODM service available. We are professonal engineering machinery equipment supplier in Changsha.

Q: What's the MOQ and payment terms?
A: MOQ is 1set. Payment via T/T, L/C, Western Union accepted, other terms can be negotiated.

Q: How about delivery time?
A: 5-10 work days after the payment.

Q: How about the package?
A: Our equipments wrapped by stretch film, packed by pallet or polywood case; or as requested.