Lab IEC 60112 PTI CTI Tester Comparative Tracking Index Tester 0-600V

Product Specification

Lab IEC 60112 PTI And CTI Tracking Index Tester

Introduction:

The tracking index tester is a special testing instrument developed, designed and manufactured in strict accordance with GB 4207, IEC 60112, JIS C 2134 and other standards. It is suitable for research, production and quality inspection departments of lighting equipment, low-voltage electrical appliances, household appliances, machine tool electrical appliances, motors, power tools, electronic instruments, electrical instruments, information technology equipment, and is also suitable for insulating materials, engineering plastics, electrical connectors, and accessories industries. It simulates the determination of the tracking index and the resistance tracking index under humid conditions, and has the characteristics of simplicity, accuracy, reliability and practicality.

Tracking test is a test method used to evaluate the insulation performance of electrical equipment, IEC 60112. This test is used to detect whether the insulation materials of electrical and electronic products are prone to leakage and arcing (i.e. tracking) in humid environmental conditions.

Test principle:

It is used to evaluate the tolerance of the surface of solid insulating materials under the combined action of electric field and contaminated medium, and to determine its comparative tracking index (CTI) and proof tracking index (PTI);
Comparative Tracking Index (CTI): The highest voltage value that the surface of the insulating material can withstand 50 drops of electrolysis (0.1% ammonium chloride aqueous solution) without forming a leakage trace, in V.
Proof Tracking Index (PTI): The voltage required for the material surface to form a permanent conductive carbon path after withstanding the action of 50 drops of electrolyte at a rate of one drop per 30 seconds, expressed in V.

Sample requirements

1. Plates and sheets with a diameter of 30 mm or more, or length and width greater than 30 mm; thickness > 3 mm, samples can be stacked, and the surface is flat;
2. Testable voltage: up to 600 V.

Main feature:

1. The combustion box is painted, beautiful, and corrosion-resistant; all sample racks are made of stainless steel.
2. The equipment consists of a voltmeter, an ammeter, a time-delay overcurrent relay, a power supply, a circuit control system, a button switch, a signal light, etc.
3. The automatic dripping device includes a dripping cylinder, a dripping nozzle, a counting device, a dripping counting device, a dripping control device, a dripping volume measuring tool, etc.
4. The drip nozzle device is adjustable; the height is adjusted to 30-40mm; ensure that the dripping position is between the two electrodes.
5. The electrode device includes a platinum electrode, an electrode fixing device, a 4mm gauge, etc. The electrode is adjustable and detachable.
6. The electrode is 5mm wide and 2mm thick, 99.9% pure platinum, and has a 30~60 degree tip.
7. The pressure of the electrode on the sample is adjustable, with an adjustment range of (1.00N±0.001N); the electrode distance is 4.0mm ± 0.01mm, and the angle is 60°±5°.
8. Equipped with a sample table.
9. Equipped with a glass plate: thickness ≥4mm.

Specification: