ISO340 : 2004 Fabric Core Conveyor Belt Vertical Combustion Tester

Product Specification

Conveyor Belt Vertical Combustion Tester

Test principle:
The sample placed vertically under the specified flame condition is ignited with a small flame ignition source. After the flame is removed, the combustion performance of the sample is comprehensively evaluated by measuring the time of continuous burning and blazing fire and the air blast of the sample 60 seconds after the flame is removed, observing the combustion behavior and measuring the time of continuous burning.
Summary: this equipment uses the test method of small scale flame (gas burner/alcohol burner) to evaluate the reaction of conveyor belt in fire, and is applicable to the combustion performance evaluation of textile core conveyor belt and steel wire core conveyor belt.It is also suitable for testing the resistance to spread combustion of plastics and its plastic parts under the condition of flame combustion.

Application:
The combustion test instrument of conveyor belt is applicable to the combustion performance test of textile core conveyor belt and steel wire rope core conveyor belt used in chemical, coal, metallurgy and electric power industries.It is used to evaluate the response of conveyor belts in fire.

Standards:
GB/ T3685-2009, ISO340:2004 and GBT10707-2008.

Technical parameters:

Note: The torch angle is adjustable. When used as a horizontal burning test, the burner is adjusted to 45°; when used as a vertical burning test, the burner is adjusted to 90°.
Burner box:
3.1 Box: 0.5m3, using CNC machine tool molding, arc modeling beautiful and elegant. High quality SUS304 Stainless material / paint, with beautiful anti-rust and anti-corrosion features.
3.2 There is an exhaust smoke exhaust system at the top of the box. When the test is completed, the exhaust gas can be discharged to the outdoors.During the inspection process, this system is in a stopped state.
3.3 The front of the box is provided with a tempered glass observation window that can be sealed during the test, to facilitate the observation of the test situation.
Burning torch:
4.1 Gas Bunsen burner, in full compliance with the requirements of GB/T 3685-2009, lamp diameter 10mm.
4.2 Outer diameter of fire exit: Ф 11.5±0.1mm, inner diameter of fire exit: Ф10±0.1mm, nozzle distance from air
Import height is 200 ± 10mm
4.3 torch angle: 45 degrees with horizontal
4.4 Flame height: 180 ± 20.
Air blast system:
5.1 Using adjustable air blowing device, wind speed adjustment range: 0.05~2m/s
Temperature measurement system (optional):
6.1 Thermal sensors are highly conductive copper cathodes. Length is 8.8±0.02mm, diameter: Ф5.5±0.01mm
6.2 Type K Thermocouple with 0.5mm Diameter Stainless Steel Tube, Intelligent PID Temperature Control Table and Type K Thermocouple matching. The maximum measurement is 1350°C.
6.3 test system: active type, temperature measurement will be placed in the test chamber, temperature measurement.
6.4 Equipped with electronic stopwatch: accurate to 0.1S (standby at temperature check)
Main fixture:
6.1 Test stand: Made of stainless steel, the plane of the bracket and torch is parallel to the plane of the observation window, which is convenient for observation and operation.
6.2 Wedge: Add wedges, torches are mounted on wedges, wedges are mounted on motors.The movable platform can be moved forward and backward, automatically moving in the sample, without having to manually push and pull the torch.
6.3 Equipped with a set of scales that can measure flame outer flame and inner flame.
6.4 Equipped with a 500MM stainless steel ruler accurate to 1MM for testing purposes.

About daxian company:
DAXIAN's testing equipment are widely used in various field: scientific institutions, colleges, inspection institutions, auto parts, electronics, electricals, LED, photoelectricity, mobile, plasticand rubber, telecommunication, chemical industry, aerospace, building material and product, wire and cable,textile and fabrix, etc. All DAXIAN testing equipment are designed according to international test standards, such as ISO, ASTM, DIN, EN, GB, BS, JIS, UL, TAPPI, AATCC, IEC, VDE, CSA,CEN and so on.