DONGGUAN YUYANG INSTRUMENT CO., LTD
| Payment Terms | T/T |
| Supply Ability | 10 sets/month |
| Delivery Time | 15-20 Days |
| Packaging Details | Wooden Box |
| Product Name | Building Material Ignitability Test Apparatus |
| Application | Building Materials |
| Power | Electronic |
| Voltage | 220V |
| Supply voltage | AC220V±10%,50Hz |
| Gas source | >95% propane gas |
| Gas pressure | 10kpa~50kpa |
| Flue air velocity | 0.7m/s |
| Brand Name | YUYANG |
| Model Number | YY510 |
| Certification | ISO 11925-2 |
| Place of Origin | China |
View Detail Information
Explore similar products
ISO 9239-1 ASTM E648 Fire Tester Critical Radiant Flux with a Radiant Heat
Melting Behavior Building Material Fire Tester For Vehicle Interior Heat
Stainless Steel Building Material Fire Tester For Ece R118 Annex 9 Test
Building Material Microscale Combustion Calorimeter BS EN 746-2 ASTM D7309
Product Specification
| Payment Terms | T/T | Supply Ability | 10 sets/month |
| Delivery Time | 15-20 Days | Packaging Details | Wooden Box |
| Product Name | Building Material Ignitability Test Apparatus | Application | Building Materials |
| Power | Electronic | Voltage | 220V |
| Supply voltage | AC220V±10%,50Hz | Gas source | >95% propane gas |
| Gas pressure | 10kpa~50kpa | Flue air velocity | 0.7m/s |
| Brand Name | YUYANG | Model Number | YY510 |
| Certification | ISO 11925-2 | Place of Origin | China |
| High Light | ISO-certified ignitability test apparatus ，building material fire tester ，fire test apparatus for construction | ||
YY510 Building Material Ignitability Test Apparatus
Description:
Ignitability test, also called single-flame source test. Test apparatus corresponds to standard EN ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1.
The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide.
45°-tilted burner is advanced horizontally until the flame (length 20 mm) reaches the pre-set contact point with the test specimen. Tests may need to be conducted to either surface exposure or edge exposure, or both. The flame application time is 15 or 30 seconds as required by sponsor.
During the test following is recorded: whether ignition occurs; whether the flame tip reaches 150 mm above the flame application point, and the time at which this occurs; whether ignition of the filter paper occurs; observations of physical behavior of the test specimen.
Specifications:
1. This apparatus made up of two parts: burning chamber and control device.
2. Power supply: AC220V±10%,50Hz；
3. Burner: diameter 0.17mm burner with regulator; four ￠4mm air suction inlet;
4. Gas source: >95% propane gas;(user should provide for themselves)
5. Gas pressure: 10kpa~50kpa
6. Flue air velocity: 0.7m/s only on condition of burner burning and draught hood open,
7. Time adjustment of continuous flame: 0 ~ 99minutes99seconds
8. Time adjustment of afterflame: 0 ~ 99minutes99seconds
9. Timer accuracy: ≤1s/h
10. Anemometer: hot wire, accuracy ±0.1m/s, for measuring the airflow velocity in the upper outlet of the combustion chamber
11. Burner angle: 45°
12. Material: stainless steel
13. Observing window: two big viewing windows on the front and right side
14. Whole set: control device, burning chamber, burner, magnetic valve, flame lighter, signal control line and specimen holder.
15. Equipped with a digital anemometer/thermometer and a stopwatch for simple but accurate measurement of the flow, temperature and time.
Standards:
GB / T8626-2007 Test Method of Flammability for Building Materials
EN ISO 11925-2:2010-Reaction to fire tests- Ignitability of building products subjected to direct impingement of flame-Part 2: Single-flame source test
Specimen holder:
| Packing Date | YY510 Building Material Ignitability Test Apparatus | Packing List NO. | |||
| Packing List | |||||
| NO. | Name | Quantity | Packing Mode | Confirm | |
| 1 | Collector | 1 | |||
| 2 | Specimen holder | 2 | |||
| 3 | Template | 2 | |||
| 4 | Burner spacer | 2 | 5mm-16mm | ||
| 5 | Flame-height measuring device | 1 | |||
| 6 | Igniter | 1 | |||
| 7 | Aluminum foil paper | 1 | |||
| 8 | Filter Paper | 1 | |||
| 9 | Anemometer | 1 | |||
| 10 | Instruction Manual | 1 | |||
| 11 | Quality Assurance | 1 | |||
| 12 | Product Certificate | 1 | |||
| 13 | Warranty Card | 1 | |||
Company Details
Business Type:
Manufacturer,Exporter,Trading Company
Year Established:
2007
Total Annual:
$ 1 Million-$ 2 Million
Employee Number:
50~100
Ecer Certification：
Verified Supplier
YUYANG INDUSTRIAL CO., LIMITED (DONGGUAN YUYANG INSTRUMENT CO.,LTD) is Located in Wangjiang District (Dongguan City ,Guangdong Province, China),a famous historical town with prosperous industry and convenient transportation. We are a high-tech enterprise which is specialized in developing ... YUYANG INDUSTRIAL CO., LIMITED (DONGGUAN YUYANG INSTRUMENT CO.,LTD) is Located in Wangjiang District (Dongguan City ,Guangdong Province, China),a famous historical town with prosperous industry and convenient transportation. We are a high-tech enterprise which is specialized in developing ...
Get in touch with us
Leave a Message, we will call you back quickly!