Full Automatic Battery Powered Floor Scrubber With No Telecontroller

Product Specification

Full Automatic Floor Scrubber Dryer Machine 20 Inch Single Brush No Telecontroller

Features.

1. Batteries can be maintained bu overturning recovery tank at 90 degrees without any tools

2. Install reset fuses on the back side of solution tank, easy for your operation;

3. Steel gear drives the brush, much more powerful and reliable;

4. Classic products, cost-effective. The products are widely used in China and world market withgood reputation

5. Core parts adopt imported brand

6. One of the largest and earliest manufacturer of electric floor scrubber ,road sweeper, street sweeper in China

7.  American rubber, high - pressure wear, anti impact, anti sprinkler

8.  Key-type switch: convenient for operation and maintenance.

9. Intelligent Auto unloading brush, to avoid tedious manual.

10. 800mm squeegee width, good squeegee curve

Our commitment

1. your inquiry will be reply as soon as possible

2. your order will be taken seriously

3. your interests will be protected absolutely

Our products goes in each and every sector like industries, auto workship, multiplex, hotels, school, colleage, railway station and platforms, housekeeping agencies, corporate and normal offices or any good property you can think.

Dycon Services has vast experience in the cleaning industry from office buildings, shopping centers, schools, child care centers, hospitals to aged care centers and more.

Services

Dycon Service provides specialized commercial and industrial cleaning solutions, catering for all your cleaning needs. As a dedicated cleaning business, we deliver on time and quality services

With our crew of qualified and experienced cleaners, no matter what the Dycon is all about providing professional and quality work.

As a dedicated cleaning business, we deliver on time and quality services.

Feedbacks

Nikolay: our partnership with Dycon goes back a long way and thru many years of ups and downs, we were able to cope up with the market demand. I am fortunate to establish and maintain productive business relationships with you. Looking forward to more fruitful years ahead.

Lisa: your quality and your updating trends by developing new models with the latest technologies in the world are absolutely remarkable.

Jun: Our challenge was to provide quality yet affordable floor scrubber machine. Dycon provided a wide variety of their products that gave a good-looking and effective interface. The floor scrubber provided all the functionality we needed.

Modern floor scrubbers have a pre-sweep option that removes the need to sweep the floor before scrubbing. The pre-sweep brush head is placed in front of the vacuum system to collect dust and debris before it can block the vacuum system. In the past it was important to sweep the floor before scrubbing to remove any debris and dust that could clog the vacuum hose or build up in the vacuum motor, which can decrease performance. If this happens, the vac hose may need to be removed to clear the obstruction and/or the vac motor may need to be blown out with compressed air. Stripping Solution should never be used as it can cause damage to the solution dispensing system, but can still be vacuumed up by the machine without harm.

Occasionally, the solution system should be flushed with water mixed with vinegar to remove any soap and calcium deposits that could build in the solution system.

After each use, the dispensing (solution) and especially the collection (recovery) tanks should be emptied and rinsed out to prevent dirt build up. Also, the

pads/brushes, vac hose, and squeegee should also be rinsed to prevent dirt build up. The vac motor should be run for several minutes afterwards to remove any moisture

that could be present in the vac motor to reduce chances of corrosion that could damage the vac motor. Failure do to this maintenance could cause in a loss of vacuum

airflow and increase in costly repairs.