Dycon Cleantec Co.,Ltd
| Payment Terms | D/A, L/C, D/P, T/T |
| Supply Ability | 300 Piece/Pieces per Month |
| Delivery Time | 7-15days |
| Packaging Details | carton+pallet |
| name | FS20F Current Lead easy to push Commercial Floor Cleaning Machines with 80cm Squeegee Width |
| dirty water level sensor | yes |
| cleaning type | Clean-In-Place (CIP) |
| solution tank | 55L |
| OEM | acceptable |
| brand | dyco/OEM |
| HS code | hard floor |
| floor type | hard floor |
| Brand Name | dycon |
| Model Number | FS20F |
| Certification | CE |
| Place of Origin | Jiangsu China |
View Detail Information
Explore similar products
Laminate Floor Walk Behind Scrubber Dryer / Hard Floor Sweeper Scrubber Machine
Heavy Duty 20 Walk Behind Floor Scrubber Machine PVC Material Acid Resistance
Colored Commercial Walk Behind Floor Sweeper , Fast Hard Floor Mopping Machine
High Efficiency Small Walk Behind Floor Scrubber With Suction 1800 M2/H
Product Specification
| Payment Terms | D/A, L/C, D/P, T/T | Supply Ability | 300 Piece/Pieces per Month |
| Delivery Time | 7-15days | Packaging Details | carton+pallet |
| name | FS20F Current Lead easy to push Commercial Floor Cleaning Machines with 80cm Squeegee Width | dirty water level sensor | yes |
| cleaning type | Clean-In-Place (CIP) | solution tank | 55L |
| OEM | acceptable | brand | dyco/OEM |
| HS code | hard floor | floor type | hard floor |
| Brand Name | dycon | Model Number | FS20F |
| Certification | CE | Place of Origin | Jiangsu China |
| High Light | commercial floor cleaners scrubbers ，commercial floor scrubber machine | ||
FS20F Current Lead easy to push Commercial Floor Cleaning Machines with 80cm Squeegee Width
Features.
1. Good vision for operation
2. Steel gear drives the brush, much more powerful and reliable;
3. Squeegee blades applicable in four directions,no need to use any tools for replacement.
4. unique brush compression system is very fit for stubborn dirt
5. Equipped with Ametek suction motor and USA original rubber blade, make sure the perfect performance
6. Brush system with automatic assembly and disassembly design without any tools for operation
7. Side-open tank design, easy to install the battery, convenient for after-sale service;
8. Low noise level suction motor device, lows the machine operation noise
9. With water level sensor design in the recovery tank, protects the suction motor better
10. USA rubber blade
.Our commitment
1. your inquiry will be reply as soon as possible
2. your order will be taken seriously
3. your interests will be protected absolutely
| Model | FS 20F |
| Brush Dia.(mm) | 510 |
| Squeegee Width(mm) | 800 |
| Solution Tank(L) | 55 |
| Recovery Tank(L) | 60 |
| Brush Driving Mode | metal gear reduce |
| Brush Speed(rpm) | 180 |
| Brush Motor(W) | 550 |
| Suction Motor(W) | 550 |
| Driving system | brush assisted |
| Efficiency(m2/h) | 1800 |
| Installed power | 220V/230V |
| Inch | 20 |
| one key control | Yes |
| Dirty water level sensor | Yes |
| Driving speed adjust | Yes |
| Dimension(mm) | 1240x550x1100 |
| loading | 26pcs/20ft |
| 54pcs/40GP |
Pre-sale Service
1. We have full stock, and can deliver within short time. Several styles for your choose..
2. Good Quality + Factory Price + Quick Response + Reliable Service, is what we are trying best to offer you
3. All of our products are produced by our professional workman, you can totally believe our service.
4. We have rich experience of design, manufacture and sell products, we cherish every order from our honor.
Introduce
After each use, the dispensing (solution) and especially the collection (recovery) tanks should be emptied and rinsed out to prevent dirt build up. Also, the
pads/brushes, vac hose, and squeegee should also be rinsed to prevent dirt build up. The vac motor should be run for several minutes afterwards to remove any moisture
that could be present in the vac motor to reduce chances of corrosion that could damage the vac motor. Failure do to this maintenance could cause in a loss of vacuum
airflow and increase in costly repairs.
Introduce
After each use, the dispensing (solution) and especially the collection (recovery) tanks should be emptied and rinsed out to prevent dirt build up. Also, the
pads/brushes, vac hose, and squeegee should also be rinsed to prevent dirt build up. The vac motor should be run for several minutes afterwards to remove any moisture
that could be present in the vac motor to reduce chances of corrosion that could damage the vac motor. Failure do to this maintenance could cause in a loss of vacuum
airflow and increase in costly repairs.
Company Details
Business Type:
Manufacturer,Exporter,Trading Company
Year Established:
2011
Employee Number:
100~150
Ecer Certification：
Verified Supplier
Dycon Cleantec Co.,Ltd.., is the professional producer for floor scrubber dryer in China, also the member of the ISSA(Worldwide Cleaning Industry Association).Dycon is committed to R&D and producing cleaning equipments, with independent product development capability. We are also accept OEM and ... Dycon Cleantec Co.,Ltd.., is the professional producer for floor scrubber dryer in China, also the member of the ISSA(Worldwide Cleaning Industry Association).Dycon is committed to R&D and producing cleaning equipments, with independent product development capability. We are also accept OEM and ...
Get in touch with us
Leave a Message, we will call you back quickly!