Xi'an Kacise Optronics Co.,Ltd.
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | 100 |
| Delivery Time | 3-10days |
| Packaging Details | Common package or custom package |
| Measuring principle | Dual wavelength ultraviolet absorption method |
| Range of COD | 0-200 mg/L equiv. Khp |
| Cod precision | ± 5% F.S. |
| COD resolution | 0.1 mg/L |
| Turbidity range | 0 ~ 100 NTU |
| Turbidity accuracy | ± 5% F.S. |
| Brand Name | kacise |
| Model Number | KCD310 |
| Certification | CE |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
Intelligent Water Quality Sensor Fiber Optic Chlorophyll Sensor RS485 Transmissi
Aquaculture Fluorescence Dissolved Oxygen Sensor High Accuracy 22mm Casing
Accurate 10% Water Quality Sensor RS485 Output Multi Parameter
Environmentally Friendly COD Sensor / Kws-100 Cod Measurement Instrument
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | 100 |
| Delivery Time | 3-10days | Packaging Details | Common package or custom package |
| Measuring principle | Dual wavelength ultraviolet absorption method | Range of COD | 0-200 mg/L equiv. Khp |
| Cod precision | ± 5% F.S. | COD resolution | 0.1 mg/L |
| Turbidity range | 0 ~ 100 NTU | Turbidity accuracy | ± 5% F.S. |
| Brand Name | kacise | Model Number | KCD310 |
| Certification | CE | Place of Origin | CHINA |
| High Light | No Reagents COD Sensor ，100 NTU Turbidity COD Sensor | ||
Many organic compounds dissolved in water absorb ultraviolet light. Therefore, the content of dissolved organic pollutants in water can be accurately measured by measuring the absorption of these organic compounds to 254 nm wavelength UV light. KCD310 online COD sensor uses two light sources, one ultraviolet light to measure COD content in water, the other reference light to measure turbidity of water, in addition, the optical path attenuation is compensated by a special algorithm, which can eliminate the interference of particulate impurities to a certain extent, so as to achieve a more stable and reliable measurement.
| Model number | KCD310 |
| Measuring principle | Dual wavelength ultraviolet absorption method |
| Range of COD | 0-200 mg/L equiv. Khp |
| Cod precision | ± 5% F.S. |
| COD resolution | 0.1 mg/L |
| Turbidity range | 0 ~ 100 NTU |
| Turbidity accuracy | ± 5% F.S. |
| Turbidity resolution | 0.1 NTU |
| Calibration mode | Two-point calibration |
| Output mode | RS-485 bus, Modbus/RTU protocol |
| Power supply | 12 ~ 24 VDC ± 10% |
| Power consumption | < 0.2w@12VDC |
| Working conditions | 0ー45 °C, < 0.1 mpa |
| Storage temperature | - 5 ~ 65 °C |
| Protection level | IP68 |
| Installation mode | Immersion mounting |
| Cable length | 5 meters, other length can be customized |
| Material for sensor housing | POM, 316L stainless steel |
Note: Sensor Connector is M16-5 core waterproof connector
YES. Although COD should be considered an independent test from BOD, and will generate a higher concentration reading than BOD for a particular wastewater sample, it is generally accepted that COD and BOD share an empirical relationship. Extensive observation of the COD and BOD levels on the same wastewater has shown that the COD to BOD ratio of a particular wastewater will remain constant over time.
For example, food processing wastewater will generally have a COD:BOD ratio of ~2:1, while textile wastewater that can contain dyes will often have a much higher COD:BOD ratio of ~5:1.
To establish the COD:BOD ratio for your wastewater, simply have both COD and BOD run on several wastewater samples. Divide the COD concentration by the BOD concentration for each sample and average the results. For example, below is the COD:BOD ratio developed using three wastewater samples from a food processor:
The important point is that once you have established an average COD:BOD ratio for your wastewater stream, then the relatively simple and quick COD test can be used to predict BOD with relative reliability.
Company Details
Business Type:
Manufacturer
Year Established:
2008
Total Annual:
8000000-10000000
Employee Number:
100~150
Ecer Certification：
Verified Supplier
Xi'an Kacise Optronics Co.,Ltd. is a professional manufacturer of measuring instruments , located in China xi’an City. Since 2008, Xi'an Kacise focused on the development and production of pressure, level and flow measuring instruments . We have been specializing... Xi'an Kacise Optronics Co.,Ltd. is a professional manufacturer of measuring instruments , located in China xi’an City. Since 2008, Xi'an Kacise focused on the development and production of pressure, level and flow measuring instruments . We have been specializing...
Get in touch with us
Leave a Message, we will call you back quickly!