Forsentek Co., Limited
| Payment Terms | T/T,Western Union or Paypal |
| Supply Ability | 2588pcs/month |
| Delivery Time | 5~30 working days |
| Packaging Details | Carton |
| Usage | Force Measurement |
| Load Direction | Traction And Compression |
| Structure | Flange-to-Flange |
| Capacity | 5kg 10kg 20kg 30kg 50kg |
| Output | Analog Transducer |
| Material | Stainless Steel |
| Brand Name | Forsentek |
| Model Number | FXFP |
| Place of Origin | China |
View Detail Information
Explore similar products
Miniature tension load cell 1kg Micro tension force sensor 10N
Tension compression load cell 100KN 70KN 50KN 30KN 20KN 10KN force sensor
Miniature tension compression load cell 5kg 10kg 20kg 50kg 100kgf
Jr. S-Beam Load Cell 20kg QSH02034 Futek Miniature Force Sensor 50lb
Product Specification
| Payment Terms | T/T,Western Union or Paypal | Supply Ability | 2588pcs/month |
| Delivery Time | 5~30 working days | Packaging Details | Carton |
| Usage | Force Measurement | Load Direction | Traction And Compression |
| Structure | Flange-to-Flange | Capacity | 5kg 10kg 20kg 30kg 50kg |
| Output | Analog Transducer | Material | Stainless Steel |
| Brand Name | Forsentek | Model Number | FXFP |
| Place of Origin | China |
0-50kg Tension And Compression Load Cell With Flanged Mounting Surface
Flange Type Tension Compression Load Cell FXFP is made from stainless steel based on proven strain gauge technology, it offers 5kgf / 10kgf / 20kgf / 30kgf / 50kgf five rated capacities intended for both traction and compression force measurement. The flanged surface enables it to be easily mounted between two assemblies. 0-5V, 0-10V and 4-20mA is available through external amplifier. You may find force transducer FXFP applicable for assembly press-in force measurement, tension control, thrust measurement. Custom made service is available if the current specifications do not meet your requirements.
A force sensor is a transducer that converts force acting on it into electronic signal which is proportional to the applied force.The acting force causes deformation of the measuring element,the bonded strain gage deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply,the output signal between Sig+ and Sig- will change proportionally,thus the force can be measured by measuring the output signal from the load cell. Flange Mounted Load Cell FXFP is designed to measure force in both tension and compression direction,outputs millivolt signal ranging -15mV...+15mV, and signal amplification may be required for most applications, a load cell signal conditioner can be used to get -5-5V, 0-10V or 4-20mA signal proportional to applied force. The amplified output then can be easily processed by PLCs and data acquisition software.The force can be displayed through force indicator, force meter FPT is integrated with high accuracy/low noise 24 bit Sigma-Delta ADC, sampling speed up to 960Hz makes it suitable for both static and dynamic measurement; FPT also supports Modbus RTU protocol with RS485 or RS232 communication port, amplified signal 0-5V,0-10V,0-20mV or 4-20mA is also achievable from FPT.
Specifications
| Capacity | 50N / 5kg / 11lb |
| Rated output | 1.0mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±0.2% of capacity |
| Hysteresis | ±0.2% of capacity |
| Nonrepeatability | ±0.1% of capacity |
| Creep(5min) | ±0.05% of capacity |
| Safe overload | 150% of capacity |
| Ultimate overload | 200% of capacity |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.02% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 385±30 ohms |
| Output resistance | 350±10 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP62 |
| Material of element | Stainless steel |
| Cable | Ø3*3000mm 4-core shielded cable |
| Wiring code | Compression@ Green--Signal output+ White--Signal output- |
0-50kg Tension And Compression Load Cell With Flanged Mounting Surface
Instruction of load cell output:
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of Compression/Tension Load Cell FXFP is around 1.0mV/V.
Power supply of Miniature Push Pull Force Sensor FXFP is normally within 3-15V.
Load / Capacity is within 0-1.
So the output range of Force Sensor FXFP is normally within -15mV...+15mV for tension/compression force measurement.
Example: Tension Compression Load Cell FXFP-5kg with 1.0mV/V sensitivity powered by 5V DC,the output range is -5mV...+5mV.
A signal conditioner can be used with the load cell to deliver -5~5V, 0-10V or 4-20mA output.
Example: Tension Compression Sensor FXFP-20kg working with -10-10V amplifier,the Force-Voltage relationship will be 0-20kgf compression load VS 0-10V output,0-20kgf tension load VS 0-(-10V) output,when you get 5V output,it means the current load is 10kgf compression force,when you get -1V output,it means the current load is 2kgf tension force,and so on.
0-50kg Tension And Compression Load Cell With Flanged Mounting Surface
Click here to download datasheet
Company Details
Business Type:
Manufacturer,Exporter,Trading Company
Year Established:
2008
Total Annual:
7000000-9000000
Employee Number:
100~150
Ecer Certification：
Site Member
Located in China,Forsentek Co., Limited has provided load cells,force sensors and measuring solutions to more than 30 countries all over the world. At Forsentek,you can find universal products like: Compression load cell Force sensor force transducer Button load cell Micro load cell ... Located in China,Forsentek Co., Limited has provided load cells,force sensors and measuring solutions to more than 30 countries all over the world. At Forsentek,you can find universal products like: Compression load cell Force sensor force transducer Button load cell Micro load cell ...
Get in touch with us
Leave a Message, we will call you back quickly!