Intelligent Power Signal Recorder Electrical Test Equipment 12.1 Inch Touch

Product Specification

Intelligent Power Signal Recorder Electrical Test Equipment 12.1 Inch Touch Screen Easy Operation

1. Product Name:

Power Signal Recorder HYLB-601

2. Equipment Description:

Power Signal Recorder is designed for power signal recording. The power generator test items are integrated at the tester. With those test items users can make following tests:

• motor (Power generator) No-load test
• Short circuit test
• Motor excitation step response test
• motor excitatory de-excitation test 
• motor load rejection test
• grid synchronous connection test and also on.

Software advantages:

The strong software system in the tester include data sample. Data compress, signal statistics and analysis, curve picture making tools, frequency spectrum tools, curve math tools, harmonic analysis tools, RMS calculation, Power calculation, three phase signal analysis tool, vector analysis tools. The major characteristic and advantages can be described as follow:

1. The recorded signal display in curve by scope in the tester in real time. Multi curve analysis is included        in the tester. User can make zoom in/out and data location from the sampled curves.

2. The recorded curves can be edited, add text tag, change the color and so on. So that users can make           report in they prefer curves and display mode.

3. The Fourier transformer tools can get the amplitude and phase spectrum of the recorded curves.

4.  All the curves can be selected as x coordinate and y coordinate to make the correlation curve of those         two curves.

5. The harmonic tools can get the maximum 1024 times harmonic for recorded curve.

6. The math tools can make add, decrease, multiple, divide and integrations for any curves in the scope.

7. Users can make RMS, Power watt calculation for any recorded curves in the scope.

8. The recorded three phase voltage and current signals can be applied to calculate the sequence, active         power, reactive power, apparent power, power factor and so on.

9. Draw vector group picture for all the AC signals recorded.

10. The signal curve display mode can be set by software. Both the instantaneous curve or RMS curve can         be showed by the tester.

11. The motor no-load test, short circuit test, excitation system step response test, de-excitation time                   constant measurement, frequency-voltage characteristic curve measurement. Load rejection test, grid         synchronous connection test template are integrated in the tester. The test results for those templates           will be automatic if the template is used for records.

12. All the data and results can be converted to be word and excel test report.

13. The curve can be marked use text automatic. That makes the report making more simple

14. All the channels name and unit can be redefined by users.

15. All the test configuration and test setting will be saved automatic.

16. The sensors setup window can make tester shows the real value such as high voltage, high current, pressure and so on direct after user configure the sensors factors

3.Technique index

The technique index of the tester is as following:

1. There are 12channels voltage/current sample.

    The analog range include -10V~10V, -200V~200V, -400V~400V and -20mA~20mA.

    Users can switch the input range from software. Also there is one channel -100mV~100mV which allow        the input signal less than 10V.

2. The voltage and current input range assured errors are as following:

      -400V~ 400V assured error less than 0.5V

      -200V~ 200V assured error less than 0.2V

      -10V~ 10V assured error less than 0.01V

      -20mA~ 20mA assured error less than 0.02mA

      -100mV~ 100mV assured error less than 0.2mV

3. There are 12 channel wet contacts binary signal input.

    The valid and allowed input voltage is DC12-200V.

4. There are 3 channel relay contacts output. The maximum capacity for the contacts is AC220V/1A.

5. There are 2 USB port used for data export and mouse/keyboard input

6. The LCD is 12.1 inches touch pad input mode. Make the human interface more simple.

7. The saved space in the tester is 32G for standard configuration

8. Input resistances for different channels are as follow:

    -10V~10V Range Input resistance is 820K

    -200V~200V Range Input resistance is 820K

    -400V~400V Range Input resistance is 820K

    -20mA~20mA Range Input resistance is 820K

    -100mV~100mV Range Input resistance is 10M

9. Power supply AC 220V 10% 45Hz-65Hz