Jiangsu Shengman Drying Equipment Engineering Co., Ltd
| Payment Terms | L/C, T/T |
| Supply Ability | 10sets |
| Delivery Time | 60-90days |
| Packaging Details | Plywood Cases |
| Application | Plastic Sheet/Plastic Laminate |
| Voltage | 220v/380v |
| Warranty | 1 year |
| Color | Customer's Request |
| Heating way | oil gas electric |
| Condition | 100% NEW |
| Weight | 2.9-104.9t |
| Material | Carbon Steel |
| Capacity | 0.5--10 tons per hour |
| Installation | Engineer guidance installation |
| Brand Name | JingSu ShengMan |
| Model Number | HZG |
| Certification | CE and ISO9001 |
| Place of Origin | China |
View Detail Information
Explore similar products
Three cylinder 3.5RPM Drum Drying Machine Ore Slag Clay Cement Dryer
220v 380v Chicken Manure Dryer Machine / Coal Drying Equipment
Diesel Heat 10 Tons Per Hour Drum Drying Machine Cereal Alfalfa Straw Dryer
Industrial 10t/H Clay Slurry Dryer Machine / SUS304 Silica Sand Dryer
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 10sets |
| Delivery Time | 60-90days | Packaging Details | Plywood Cases |
| Application | Plastic Sheet/Plastic Laminate | Voltage | 220v/380v |
| Warranty | 1 year | Color | Customer's Request |
| Heating way | oil gas electric | Condition | 100% NEW |
| Weight | 2.9-104.9t | Material | Carbon Steel |
| Capacity | 0.5--10 tons per hour | Installation | Engineer guidance installation |
| Brand Name | JingSu ShengMan | Model Number | HZG |
| Certification | CE and ISO9001 | Place of Origin | China |
| High Light | Gas Heating Rotary Drum Dryer ，Electric Heating Rotary Drum Dryer ，Gas Heating Drum Dryer Machine | ||
HZG High Efficiency Continuous Rotary Drum Dryer for Plastic Sheet/Plastic Laminate
WORKING PRINCIPLE
Rotary Drum Drier is a kind of dryer with rotating cylinder body which is a little bit incline. The wet material is loaded from
one end from the screw material adding device continuously, and is stirred by the bafflers that are uniformly distributed in the barrel.The material is uniformly distributed and dispersed in the dryer and fully contacts the hot air of counter flow. When the material passing through the cylinder inside surface, it will contact with the hot air circling inside and being dried .Most of the dried product will be discharged from the other end of the dryer. Small part of the fine granule goes into the cyclone separator with the exhaust air. The powder will be separated and collected, and the exhausted air will be ejected to the atmosphere. During the drying course, the material will slowly move to the lower end from the higher part recur to the slowness rotating of the cylinder
Technical parameters
| raw material | ore | vesicant | slag of blast furnace | coal |
| amount to be treated (kg/h) | 1000 | 466 | 15000 | 5000 |
| primary moisture(%) | 30 | 13 | 6 | 6.5 |
| final moisture (%) | 15 | 0.3 | 1 | 0.1 |
| average diameter(mm) | 6.5 | 0.05 | 4.7 | 5 |
| amount of hot air(m³/kg) | 39000 | 5400 | 10750 | 16000 |
| temp of air at inlet (℃) | 600 | 165 | 500 | 570 |
| temp of material at outlet(℃5) | 42 | 100 | 75 | |
| way of heating | gas | electric | heavy oil | heavy oil |
| revolution (r.p.m) | 4 | 4 | 3.5 | 2 |
| length of dryer | 20 | 12 | 17 | 16 |
Advantages
(1) Large throughput capacity and continuous operation
(2) Simple configuration and easy to operate
(3) Good adaptability of materials
(4) Low energy consumption
(5) Low maintenance cost
APPLICATION
This dryer widely used in the following industries:
- Drying large particles and heavy material for chemical, mining, metallurgy and other industries, such as: mining, blast furnace
slag, coal, metal powder, fertilizer, ammonium sulfate.
- Drying powder or granular materials which have special requirements, such as: HP vesicant, lees residue, precipitated calcium
carbonate, activated clay, magnetic powder, graphite, dregs.
- Drying the material which required low-temperature and continuous drying process.
Pre-service:
As a good and rich experience supplier, we should offer customer the best quality and best price of the machine. We do something as following:
(1). introduce the suitable product to the customer in detail
(2). answer the question raised by customer carefully
(3). make the suitabe project as the customer requirement
(4). make sure the machine is suitable for the material
Sale service:
In order to fulfill the contract smoothly, establish a good cooperative relationship, here's are several points what we must do.
(1). ensure product with high quality and pre-commissioning before delivery
(2). delivery on time
(3). provide full set of documents as customer’s requirements
After-sale service:
Provide considerate services to minimize customers’ worries.
(1). Assist customers to prepare for the first construction scheme.
(2). Install and debuging the drying equipment.
(3). Train the first-line operators.
(4). Exame the drying equipment.
(5). Take initiative to eliminate the troubles rapidly.
(6). Provide technical support.
(7). Establish long-term and friendly relationship with all my customers.
Company Details
Business Type:
Manufacturer
Year Established:
2011
Total Annual:
10000000-20000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Jiangsu Shengman Drying Equipment Engineering Co.,Ltd, established in 2011, known as a local leading high-tech enterprise, is located in Zhenglu town, Changzhou, Jiangsu, China. Shengman is a large-scale production enterprise in China drying industry with a registered capital of 100,000,000 RMB, spe... Jiangsu Shengman Drying Equipment Engineering Co.,Ltd, established in 2011, known as a local leading high-tech enterprise, is located in Zhenglu town, Changzhou, Jiangsu, China. Shengman is a large-scale production enterprise in China drying industry with a registered capital of 100,000,000 RMB, spe...
Get in touch with us
Leave a Message, we will call you back quickly!