HUATAO LOVER LTD
| Supply Ability | 100 units per month |
| Delivery Time | 15-20 working days |
| Packaging Details | Wooden box |
| Payment Terms | L/C, T/T, Western Union, MoneyGram |
| Product name | Rotating concentration transmitter |
| Concentration limit | 1-16% fiber concentration |
| Repeatability | Better than ±0.3% of full scale deviation under stable operating conditions |
| Flow limit | 0.5-5.0m/s (1.6-16.4ft/s) |
| Process pressure | 10bar(145psi), 16bar(230psi) or 25bar(360psi) |
| Media temperature | Max 150C/300F, Min 15"C/60"F |
| Ambient temperature | Transmitter: up to 60C/140F, electronic circuit box: up to 50C/122"F |
| Power consumption | 200mA max at 24VDC |
| Electric motor | Squirrel cage 3-phase motor, 0.3kW 4-pole insulation class F, wide voltage motor, all voltages |
| Brand Name | Huatao |
| Model Number | HT-RC-05 |
| Certification | ISO |
| Place of Origin | China |
View Detail Information
Explore similar products
Low Speed Toilet Paper Machine 3900 Toilet Roll Making Machine
1575mm Low Speed Toilet Paper Manufacturing Machine / Facial Tissue Making
Big Diameter Paper Machine Spare Parts Press Section Grooved Roll
3 T / 8 Hours Toilet Paper Jumbo Width Pulp Molding Machine
Product Specification
| Supply Ability | 100 units per month | Delivery Time | 15-20 working days |
| Packaging Details | Wooden box | Payment Terms | L/C, T/T, Western Union, MoneyGram |
| Product name | Rotating concentration transmitter | Concentration limit | 1-16% fiber concentration |
| Repeatability | Better than ±0.3% of full scale deviation under stable operating conditions | Flow limit | 0.5-5.0m/s (1.6-16.4ft/s) |
| Process pressure | 10bar(145psi), 16bar(230psi) or 25bar(360psi) | Media temperature | Max 150C/300F, Min 15"C/60"F |
| Ambient temperature | Transmitter: up to 60C/140F, electronic circuit box: up to 50C/122"F | Power consumption | 200mA max at 24VDC |
| Electric motor | Squirrel cage 3-phase motor, 0.3kW 4-pole insulation class F, wide voltage motor, all voltages | Brand Name | Huatao |
| Model Number | HT-RC-05 | Certification | ISO |
| Place of Origin | China | ||
| High Light | rotating concentration transmitter ，0.5m/s concentration transmitter ，5.0m/s concentration transmitter | ||
0.5-5.0m/S Flow Limit Rotating Concentration Transmitter For Paper Pulp
Rotating concentration transmitters can be used for many different variations using different components. It is suitable for all stages of the entire pulping process, from the blow-off line after the digester, to the screening and cleaning stages, even the bleaching workshop, until entering the pulp tank stage before the paper machine, etc.
| Product name | Rotating Concentration Transmitter |
| Model | RC81 |
| Repeatability | 0.01%Cs |
| Contact medium part material | Stainless steel |
| Flow limit | 0.1 to 5m/s (0.3 to 16.1fps) |
| Sensitivity | Better than ±0.005% |
| Ambient temperature | Up to 60°C (140F) |
| Precision | 0.01%Cs |
| Motor | 3-phase 380VAC, 370W, IP54 |
| Advantages | 1. High measurement accuracy and repeatability 2. Minimum flow in a large flow range 3. Robust design provides high durability and minimal maintenance 4. Simple structures, can be repaired on site 5. The sensor is fully protected by the converter 6. Complete recording of calibration and transmitter settings via flash memory card 7. Simple installation - low installation cost |
1. Liquid crystal display, which can realize multi-point, parabolic calibration and easy to operate calibration;
2. Signal damping and filtering are very low, signal to noise ratio is high, and has high precision;
3. Not affected by pulp, fiber type, freeness, Kappa number, flow rate, pressure, etc.;
4. It is little affected by pH and temperature, and the temperature can be compensated;
5. Unaffected by pressure, air bubbles, and electrical conductivity;
6. Fast response, short reaction time and control dead time, and good controllability;
7. It can be installed on horizontal, vertical, or inclined pipes. The sensor shaft should be horizontal and the motor should be under the sensor.
1. Your inquiry regard to our product will be replied within 24hours
2. Well-trained & experienced staff are to answer all your inquiries in English
3. OEM&ODM projects are highly welcomed. We have strong R&D team here to help
4. Your business relationship with us will be confidential to any third party
Company Details
Business Type:
Manufacturer,Exporter,Trading Company
Year Established:
2001
Total Annual:
50000000-80000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
HUATAO LOVER LTD was born in 2001, always with the philosophy of "respecting the heaven and loving the people, striving for perfection" as the main line of development, and continuously involved in different industries. After more than ten years of development into a group enterprise, the ... HUATAO LOVER LTD was born in 2001, always with the philosophy of "respecting the heaven and loving the people, striving for perfection" as the main line of development, and continuously involved in different industries. After more than ten years of development into a group enterprise, the ...
Get in touch with us
Leave a Message, we will call you back quickly!