BOSCH 3842527867 Gear Unit Reducer Durability Reliability High Safety New

Product Specification

Product Description:

1. Advantages and Features High-precision and efficient transmission

Planetary gear structure is adopted, with a transmission efficiency of more than 96%, and a speed ratio range of 3:1 to 100:1, which is suitable for different torque demand scenarios; The output shaft design is suitable for servo motors or hydraulic motors (such as the eLION series), and the torque control error can be controlled within ±1%, supporting high dynamic response.

Modularity and strong adaptability

Modular design simplifies the installation process, supports rapid integration with Rexroth hydraulic motors and servo motors, and is suitable for walking, hoisting and slewing drive systems; Provides multi-speed manual reducers and central drive solutions to meet the needs of two-wheel/four-wheel electric transmission.

Durability and reliability

The gears are made of hardened alloy steel and precision grinding technology to reduce noise and vibration. The protection level reaches IP65 and is suitable for harsh environments such as dust and oil pollution.

Long-life grease seal design, maintenance cycle can reach more than 10,000 hours, reducing downtime costs. ‌

Flexible application and energy-saving design‌

Built-in complete hydraulic system (such as CytroForce series), no additional pipe connection is required, saving space and energy consumption;
Supports personalized configuration, quickly define workflow through parameter input tools, and improve engineering efficiency.

2. ‌Precautions for use‌

‌Installation and commissioning‌

It is necessary to ensure that the reducer and the drive equipment (such as servo motor) are aligned, and the flange bolts are symmetrically and evenly tightened to avoid wear caused by uneven force;
Before commissioning, check the lubricant filling amount and match the system voltage (such as the voltage-stabilized power supply requirements of the servo drive).

‌Operation and maintenance‌

Regularly monitor the grease status, replace the lubricant every 10,000 hours or according to the working conditions to prevent dry grinding of gears;
High temperature environment (>80℃) requires enhanced heat dissipation or selection of high temperature resistant models to avoid aging and failure of seals.

‌Operation specification‌

Avoid frequent start-stop or sudden load changes to prevent the planetary gear set from being subjected to impact loads;
It is prohibited to operate over the rated torque, and long-term overload may cause gear breakage or bearing damage.

‌Accessories and Upgrades‌

When replacing gears or seals, original accessories (such as R911 series models) must be used to ensure compatibility and accuracy;
When upgrading to servo control, the communication protocol (such as CANopen) and control algorithm of the driver must be matched.

‌Key Tips‌:

Before long-term shutdown, the internal residual oil must be drained to prevent oxidation corrosion;
When multiple reducers are linked, the synchronization accuracy must be calibrated through the control software to avoid motion deviation.

FAQ

Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.

Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.

Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.

Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.

Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.