Guangzhou HongCe Equipment Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 10 set /month |
| Delivery Time | 20 days |
| Packaging Details | plywood |
| Standard | IEC60730-1 |
| Brass washer | Φ60*2.5mm |
| Friction wheel | Φ65*7.5mm |
| Sliding weight | 500g |
| Test times | 1~999999 |
| Warranty | 1 Year |
| Size | 640*340*270mm(L*W*H) |
| Test stroke | 20mm |
| Brand Name | HongCe |
| Model Number | IN-2 |
| Certification | calibration certificate (cost additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC 60745-2-1 Electric Hammer Durability Test Apparatus Steel Ball Diameter 38mm
IEC 60811 Natural Convection Oven Heating Chamber 8-20 Air Changes Per Hour
IEC Testing equipment Inductive Load Bank With 3 Test Stations Output Current
IEC 60745-2-5 Testing Equipment For Circular Saw Switch And Lower Guard
Product Specification
| Payment Terms | T/T | Supply Ability | 10 set /month |
| Delivery Time | 20 days | Packaging Details | plywood |
| Standard | IEC60730-1 | Brass washer | Φ60*2.5mm |
| Friction wheel | Φ65*7.5mm | Sliding weight | 500g |
| Test times | 1~999999 | Warranty | 1 Year |
| Size | 640*340*270mm(L*W*H) | Test stroke | 20mm |
| Brand Name | HongCe | Model Number | IN-2 |
| Certification | calibration certificate (cost additional) | Place of Origin | China |
| High Light | Label Marking Abrasion Test Machine ，Friction Wheel Abrasion Test Machine ，IEC60730-1 Abrasion Test Machine | ||
48rpm Label Marking Abrasion Test Machine - 20mm Test Stroke
IEC60730-1 Annex A
A.1.3 Markings which are mandatory within the requirements of this standard and which are accessible to the final user of the equipment after the control is mounted or installed as for normal use. IEC Test Equipment
These markings, in addition to being resistant to the handling, etc., described in A.1.2, have also to withstand the rubbing and handling expected during the use of the equipment.
Markings on knobs, etc., shall survive the continual handling and rubbing as a result of manual actuation. Other markings should be resistant to cleaning, polishing and the like. IEC Test Equipment
A.1.4 Compliance with the requirements for indelibility of markings classified according to A.1.2 and A.1.3 of this annex A is checked by the tests of A.2 or A.3 of annex A using the apparatus shown in figure 8.
Production introduction:
This testing apparatus is design and manufactured according to IEC60730-1 standard figure 8 and annex A requirements, used for testing the controller marking durability performance. IEC Test Equipment
The apparatus comply with the dimensions requirements of IEC 60730-1 Figure 8. Test times can be set from 1 to 999999 (default as 12 times), test rate 48 rpm. It is a easy operated professional equipment.
Main technical parameters:
| Equipment | Markings durability tester |
| Test station | 1 station |
| Test stroke | 20mm |
| Test rate | 48rpm IEC Test Equipment |
| Test times | 1~999999, default as 12times |
| Sliding weight | 500g. Strip weight 250g, with weight 750g |
| Brass washer | Φ60*2.5mm |
| Friction wheel | Φ65*7.5mm |
| Power supply | 220VAC 50Hz IEC Test Equipment |
| Standard | IEC 60730-1 Figure 8, Annex A |
Picture for reference:
Company Details
Business Type:
Manufacturer
Year Established:
2003
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate... Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate...
Get in touch with us
Leave a Message, we will call you back quickly!