Guangzhou HongCe Equipment Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 5 set per month |
| Delivery Time | 30 days |
| Packaging Details | Plywood |
| Product name | Circular Saw Lower Guard Test Device |
| Warranty | 1 year |
| Operation | 7 Inch Touch screen |
| Test sample | Circular saws |
| Standard | IEC/EN 60745-2-5, IEC 62841-2-5 |
| Drive | Motor |
| Automatic / manual speed | 0-30 times / min |
| Test times | 0-999999 times |
| Brand Name | HongCe |
| Model Number | HDD8302 |
| Certification | Third party calibration certificate(cost additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC 60745-2-1 Electric Hammer Durability Test Apparatus Steel Ball Diameter 38mm
IEC 60811 Natural Convection Oven Heating Chamber 8-20 Air Changes Per Hour
IEC Testing equipment Inductive Load Bank With 3 Test Stations Output Current
IEC 60745-2-5 Testing Equipment For Circular Saw Switch And Lower Guard
Product Specification
| Payment Terms | T/T | Supply Ability | 5 set per month |
| Delivery Time | 30 days | Packaging Details | Plywood |
| Product name | Circular Saw Lower Guard Test Device | Warranty | 1 year |
| Operation | 7 Inch Touch screen | Test sample | Circular saws |
| Standard | IEC/EN 60745-2-5, IEC 62841-2-5 | Drive | Motor |
| Automatic / manual speed | 0-30 times / min | Test times | 0-999999 times |
| Brand Name | HongCe | Model Number | HDD8302 |
| Certification | Third party calibration certificate(cost additional) | Place of Origin | China |
| High Light | Circular Saw Lower Guard Test Device ，IEC 60745-2-5 Lower Guard Test Device ，Touch Screen Lower Guard Test Device | ||
IEC 60745-2-5 Circular Saw Lower Guard Test Device, 0-30 times / min
Standard: IEC 60745-2-5 : Particular requirements for circular saws, clause 19.102.3 and Annex BB, EN 60745-2-5, IEC 62841-2-5 clause 17.101
Application: This device is applicable to test the closing time and mechanical strength of lower guard for circular saws.
Test sample: Circular saws IEC Test Equipment
Feature: The saw is to be set for a 90°cut and oriented in the horizontal plane. The lower guard is to be cycled from the full closed position to the maximum open working position and then released for 50000 cycles at a rate not less than 10 cycles per minute. The cycle numbers recorded by a position sensor. Following the cycle, the closure time shall not exceed 0.3s. The device record the times when detected closure time exceed 0.3s. When preset test times completed, device record the last closure time and stop automatically.
Parameters: IEC Test Equipment
| No. | Item | Specification | Remark |
| 1 | Power supply | 220V/50Hz | |
| 2 | Electrical control | MITSUBISHI PLC operation, 7 Inch Touch screen operation | IEC Test Equipment |
| 3 | Drive | Motor | |
| 4 | Test times | 0-999999 times, preset | |
| 5 | Detection time | 0-9.99s, display | Closure time |
| 6 | Automatic / manual speed | 0-30 times / min, can be preset | |
| 7 | Manual state rotation | Touch control, clockwise or counter clockwise | |
| 8 | Dimension | 80*70*100cm, about 80kg |
Picture for reference:
Company Details
Business Type:
Manufacturer
Year Established:
2003
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate... Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate...
Get in touch with us
Leave a Message, we will call you back quickly!