Guangzhou HongCe Equipment Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 10 set /month |
| Delivery Time | 30 days |
| Packaging Details | plywood |
| Model | HJ0608A |
| Flexing angle | 0-360° |
| Control | PLC control |
| Language | English |
| Configuration | 0~4KW |
| Bearing | Max. 10kg |
| Brand Name | HongCe |
| Model Number | HJ0608A |
| Certification | calibration certificate (cost additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC60335-2-14 Flexing Test Apparatus 2000 Flexing Times 6/Min Flexing Rate
Cord Anchorage Electrical Appliance Tester Strain And Twisting Device For
IEC 60335-1 Household Appliance Supply Cord Flexing Test Apparatus / Portable
Diameter 15mm Electrical Appliance Tester Temperature Rise Test Measurement
Product Specification
| Payment Terms | T/T | Supply Ability | 10 set /month |
| Delivery Time | 30 days | Packaging Details | plywood |
| Model | HJ0608A | Flexing angle | 0-360° |
| Control | PLC control | Language | English |
| Configuration | 0~4KW | Bearing | Max. 10kg |
| Brand Name | HongCe | Model Number | HJ0608A |
| Certification | calibration certificate (cost additional) | Place of Origin | China |
| High Light | 4KW Flexing Test Apparatus ，IEC 60335 Flexing Test Apparatus ，PLC Flexing Test Apparatus | ||
4KW Household Appliance Supply Cord IEC60335 PLC Control Flexing Test Apparatus
Standard: Clause 23.3 and 25.14 of IEC 60335-1 Household and similar electrical appliances – Safety – Part 1: General requirements, IEC60335-2-14 and etc.
Application: It is used to check that the supply cord of the small household appliances (such as Coffee pot / electric iron) and lamps is adequately protected against excessive flexing where it enters the appliance.
Test sample: Small household appliances, such as coffee pot, electric iron, toaster, luminaires and etc.
Feature: The test stations, test angles, load voltage can be customized. The test cycles, speed, voltage and etc. can be preset.
Technical Parameters:
| Item Name | Parameters |
| Flexing angle | 0-360°. Can be preset |
| Flexing speed | 0~60 rpm, can be preset |
| Test times | 0~999999 times, can be preset and displayed |
| Power | 120V 60Hz |
| Control | PLC programmable control |
| Drive | Servo motor |
| Operation | Touch screen intelligent operation |
| Configuration | 0~4KW transformer, test current can be displayed |
| Bearing | Max. 30kg |
| Test station | 1 station |
| Specimen fixture | Universal fixtures, with center gage of rotation |
| Load weights | 5N*1,10N*1 |
| Standards | IEC 60335-1, IEC 60335-2-14, GB4706.1, GB2099 |
Maintenance
Common Faults And Treatments
| No. | Fault | Reason | Treatment |
|
1 | Turn on the POWER switch, but the indicator light not turn on | The external power supply is not connected | Please connect to the external power supply |
| The fuse is broken | Find out the reason and change the fuse. | ||
| The indicator light damaged | Replace the light | ||
|
2 | Turn on the POWER switch, Touchscreen not work | The internal DC24V power supply is in problem | Replace the DC24V power supply |
| Touchscreen damaged | Replace the touchscreen | ||
| 3 | Touchscreen no response | Connection to PLC loose | Reconnect |
| Touchscreen damaged | Replace the touchscreen | ||
| 4 | Load power no power supply | Load socket damaged | Replace the socket |
| The fuse is broken | Change the fuse | ||
|
5 |
Press down Start button, but the manipulators do not work. | The display value and preset value of test times are the same | Press Count Cleared |
| The E-STOP button is not reset | Release E-STOP button | ||
| There is foreign object in the machine, the machinery is stuck | Remove the foreign object | ||
| It is not under auto test mode | Press Start button | ||
| Connection to motor loosen | Reconnect | ||
| Not in starting position | Homing | ||
| 6 | Noise | Swivel speed low or too high | Reset the speed |
| Connection to motor loosen | Reconnect |
Company Details
Business Type:
Manufacturer
Year Established:
2003
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate... Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate...
Get in touch with us
Leave a Message, we will call you back quickly!