Guangzhou HongCe Equipment Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 10 set /month |
| Delivery Time | 30 days |
| Packaging Details | plywood |
| standard | IEC60947-1 |
| Test height | 250~500mm |
| Diameter of gyration | 75mm |
| Test rate | 10±2 RPM |
| Diameter of ferrule hole | 6.5~28.6mm |
| Test times | 0～9999 |
| Brand Name | HongCe |
| Model Number | HC9903A |
| Certification | Calibration Certificate (Cost Additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC 60745-2-1 Electric Hammer Durability Test Apparatus Steel Ball Diameter 38mm
IEC 60811 Natural Convection Oven Heating Chamber 8-20 Air Changes Per Hour
IEC Testing equipment Inductive Load Bank With 3 Test Stations Output Current
IEC 60745-2-5 Testing Equipment For Circular Saw Switch And Lower Guard
Product Specification
| Payment Terms | T/T | Supply Ability | 10 set /month |
| Delivery Time | 30 days | Packaging Details | plywood |
| standard | IEC60947-1 | Test height | 250~500mm |
| Diameter of gyration | 75mm | Test rate | 10±2 RPM |
| Diameter of ferrule hole | 6.5~28.6mm | Test times | 0～9999 |
| Brand Name | HongCe | Model Number | HC9903A |
| Certification | Calibration Certificate (Cost Additional) | Place of Origin | China |
| High Light | 75mm IEC Test Equipment ，IEC 60947-1 IEC Test Equipment | ||
IEC60947 Wire Clamping Damage To And Accidental Loosening Of Conductors Flexion Tester 75mm
Product Introduction
This testing machine is also called the test apparatus for checking damage degree of wire which confirms to standards IEC60947-1 clause 8.2.4.3 ,figure 1 table 5. This compliance is used for judging whether the design and the structure of the clamping screw terminal is correspondent with the requirement of non over-damage to the wire. Besides, it is also used to check whether the clamping screw terminal can bear the stress during the process of normal usage.
The testing times can be preset before the test, and the compliance stops automatically with the alarm when the testing times are reached.
Technical Parameters
| Model | HC9903A |
| Test rate | 10±2 RPM |
| Diameter of gyration | 75mm |
| Test times | 0～9999 |
| Weights | 0.2,0.3, 0.4, 0.7, 0.9, 1.4, 2, 2.9, 4.5, 5.9, 6.8, 8.6, 9.5, 10.4, 14, 15, 16.8, 20, 22.7kg (weights superimposed) |
| Test height | 250~500mm |
| Diameter of ferrule hole | 6.5~28.6mm, 12 pc |
| Standards | IEC60998-2-2,IEC60947-1 |
Notice:
(1)This device equipment with 18 wire bushes of 9 size, diameter: 6.5mm, 9.5mm, 13mm, 14.5 mm, 15.9mm, 19.1mm, 22.2mm, 25.4mm and 28.6mm.
(2)Rotate radius of turn table center hole is 38mm, user can select appropriate wire bush according to test requirements for test sample.
(3)If the bush hole not big enough, need to bundle the wire into the hole, can replace a bigger wire bush
(4)Height (H) deviation of ±15mm
Table 1: weights list
| No. | Weight mass(kg) | Quantity |
| 1# | 0.2 with hook | 1 pc |
| 2# | 0.3 with hook | 1 pc |
| 3# | 0.4 with hook | 1 pc |
| 4# | 0.7 with hook | 1 pc |
| 5# | 0.7 through hole | 2 pc |
| 6# | 0.9 with hook | 1 pc |
| 7# | 0.9 through hole | 2 pc |
| 8# | 1.4with hook | 1 pc |
| 9# | 2 with hook | 1 pc |
| 10# | 2 through hole | 1 pc |
| 11# | 2.3 through hole | 1pc |
| 12# | 4.5 with hook | 1 pc |
| 13# | 4.5 through hole | 1pc |
| 14# | 6.8 with hook | 1 pc |
| 15# | 6.8 through hole | 1 pc |
| 16# | 8 .2with hook | 1 pc |
Table 2: weights collocation table
| Required mass (kg) | Collocation |
| 0.2 | 1# |
| 0.3 | 2# |
| 0.4 | 3# |
| 0.7 | 4# |
| 0.9 | 6# |
| 1.4 | 8# |
| 2 | 9# |
| 2.9 | 9#+7# |
| 4.5 | 12# |
| 5.9 | 12#2*5# |
| 8.6 | 14#+2*7# |
| 9.5 | 9#+13#+11#+5# |
| 10.4 | 12#+13#+2*5# |
| 14 | 14#+13#+10#+5# |
| 15 | 16#+15# |
| 16.8 | 16#+13#+11#+2*7# |
| 20 | 16#+15#+11#+10#+5# |
| 22.7 | 16#+15#+13#+11#+7# |
Company Details
Business Type:
Manufacturer
Year Established:
2003
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate... Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate...
Get in touch with us
Leave a Message, we will call you back quickly!