Guangzhou HongCe Equipment Co., Ltd.
| Payment Terms | L/C, T/T |
| Supply Ability | 10 sets per momth |
| Delivery Time | 30 days |
| Packaging Details | Plywood |
| standdart | IEC60335-1 clause 21.2 |
| Drive mode | stepper motor-driven |
| Scratching speed | 0-25mm/s adjustable |
| Testing times | 0-9999times，it can be preset |
| Working table | 360° rotatable |
| Radius of Steel Pin | 0.25±0.02mm |
| Brand Name | HongCe |
| Model Number | HJ0604 |
| Certification | Third part calibration certificate(cost additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC60335-2-14 Flexing Test Apparatus 2000 Flexing Times 6/Min Flexing Rate
Cord Anchorage Electrical Appliance Tester Strain And Twisting Device For
IEC 60335-1 Household Appliance Supply Cord Flexing Test Apparatus / Portable
Diameter 15mm Electrical Appliance Tester Temperature Rise Test Measurement
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 10 sets per momth |
| Delivery Time | 30 days | Packaging Details | Plywood |
| standdart | IEC60335-1 clause 21.2 | Drive mode | stepper motor-driven |
| Scratching speed | 0-25mm/s adjustable | Testing times | 0-9999times，it can be preset |
| Working table | 360° rotatable | Radius of Steel Pin | 0.25±0.02mm |
| Brand Name | HongCe | Model Number | HJ0604 |
| Certification | Third part calibration certificate(cost additional) | Place of Origin | China |
| High Light | Clause 21.2 Strength Resistance Testing Machine ，IEC 60335-1 Strength Resistance Testing Machine | ||
IEC60335-1 clause 21.2 Abrasion Strength Resistance Testing Machine
Product information:
The device is used to check abrasion strength of printed circuit boards or the insulating accessible parts of the household appliances. It conforms to the standard requirement of IEC60950 clause 2.10.8.4 and IEC60335-1 clause 21.2.
This device adopts a hardened steel pin for scratching. The end of the pin is form of a cone having a tip angle of 40°, its tip being rounded and polished, with a radius of 0,25 mm ± 0,02 mm. Scratches are made by drawing the pin along the surface in a plane perpendicular to the conductor edges at a speed of 20 mm/s ± 5 mm/s. The pin is so loaded that the force exerted along its axis is 10 N ± 0,5 N.
The scratches shall be at least 5 mm apart and at least 5 mm from the edge of the specimen.
Scratches are made across five pairs of conducting parts and the intervening separations at points where the separations will be subject to the maximum potential gradient during the tests.
Technical parameters:
1. Input voltage:230V/50Hz；
2. control system:PLC + touch screen；
3. Drive mode:stepper motor-driven；
4. Scratching speed::0-25mm/s adjustable；
5. Testing times:0-9999times,it can be preset；
6. Scratching distance: Adjustable
7. Working table:360° rotatable；
8. Scratching pressure:10N±0.5N,it can be equipped with the weight of 20N to reach the scratching pressure of 30N±0.5N；
9. Radius of Steel Pin: 0.25±0.02mm
Picture for reference:
Company Details
Business Type:
Manufacturer
Year Established:
2003
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate... Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate...
Get in touch with us
Leave a Message, we will call you back quickly!