Guangzhou HongCe Equipment Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 20 set/ month |
| Delivery Time | 20 Days |
| Packaging Details | Plywood |
| Size | Φ400*500mm |
| Material | Chrome steel |
| Center distance | 75mm * 45mm |
| Test standard | IEC60884.1 clause 24.3 |
| Brand Name | HongCe |
| Model Number | LS-1 |
| Certification | TUV、ITS、CSA、BV、SGS 、CNAS(cost additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC 60745-2-1 Electric Hammer Durability Test Apparatus Steel Ball Diameter 38mm
IEC 60811 Natural Convection Oven Heating Chamber 8-20 Air Changes Per Hour
IEC Testing equipment Inductive Load Bank With 3 Test Stations Output Current
IEC 60745-2-5 Testing Equipment For Circular Saw Switch And Lower Guard
Product Specification
| Payment Terms | T/T | Supply Ability | 20 set/ month |
| Delivery Time | 20 Days | Packaging Details | Plywood |
| Size | Φ400*500mm | Material | Chrome steel |
| Center distance | 75mm * 45mm | Test standard | IEC60884.1 clause 24.3 |
| Brand Name | HongCe | Model Number | LS-1 |
| Certification | TUV、ITS、CSA、BV、SGS 、CNAS(cost additional) | Place of Origin | China |
| High Light | iec testing equipment ，iec tester | ||
IEC Testing Equipment Test Cylinder To Check Reliability Of Fixed Structure
Product details:
This device conforms to the IEC60884.1 clause 24.3. Cylindrical which is made of steel is used to check the reliability of the fixed structure of the surface mounted socket.
Technical parameters:
Steel cylinder:
1. Size:Φ400*500mm.
2. Material: Chrome steel.
3. Equip with American type 8# and10# threaded holes.
4. Center distance: 75mm * 45mm, the thread hole layout is as follows:
Operation steps:
Use according to related standards of IEC60884.1 clause 24.3.
The base of the surface mounted socket should be fixed to the rigid steel cylinder, for the screw diameter is not greater than 3mm, please use the fixed base that the maximum torque is 0.5N.m, for the screw diameter is greater than 3mm, please use the fixed base that the maximum torque is 1.2N.m. Respectively fixed to the the side and the top of the steel cylinder shown as below picture, after test, test socket base should be able to use normally.
Note: considering the actual use of the equipment, only with the American type 8# and 10# thread hole, using maximum torque of 1.2N.m.
Company Details
Business Type:
Manufacturer
Year Established:
2003
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate... Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate...
Get in touch with us
Leave a Message, we will call you back quickly!