2025 XTOOL D9S Pro plus KS-1 KS01 Smart Key Emulator and KC501 Key & Chip

Product Description

XTOOL D9S Pro plus KS-1 KS01 Smart Key Emulator and KC501 Key & Chip Programmer for Toyota/ Lexus/ Scion All Keys Lost No Need Disassembly

Bundle Package: XTOOL D9S Pro Auto Diagnostic Scanner Support ECU Coding Key Programming + XTOOL KS-1 KS01 Smart Key Emulator + XTOOL KC501 Key & Chip Programmer

XTOOL D9S PRO Features

XTOOL D9S PRO: 2025 Newest Advanced Wireless Car Diagnostic Tool
Upgrade to the XTOOL D9S PRO – the pinnacle of XTOOL’s diagnostic tools designed for professional mechanics and workshops. Built on the Android V10.0 system, this advanced OBD2 scanner packs cutting-edge features, superior hardware, and robust wireless capabilities to deliver unparalleled diagnostic performance.



1. 2025 Version V2.0 with FCA AutoAuth:

Supports FCA SGW diagnostics for Chrysler, Dodge, Jeep, and Fiat vehicles (2018+).
Unlocks access to bidirectional control and advanced diagnostics for FCA vehicles with VCI V208 version.
Requires an FCA account for use.

Note: Check compatibility with VIN before purchase.




2. Advanced ECU Programming & Coding:

Reflash and reprogram modules like ECM, TCM, and BCM for VW, Audi, Skoda, Benz, BMW (F/G chassis), and others.
Offline ECU programming for Ford, Mazda, and Lincoln to handle second-hand or blank ECUs.
Unlock hidden features and enhance car performance.

Note: Not compatible with GM vehicles. Send VIN for compatibility check.




3. Intelligent Topology Map for Enhanced Diagnosis:

Visualize the communication structure between vehicle modules at a glance.
Display all faults, execute functions, and view live data in graphs with a single click.
Improve diagnostic efficiency by 90% for professional repair shops.

Note: Not available for all vehicles. Check compatibility.



4. 42+ Service Functions for Comprehensive Maintenance:

Perform advanced maintenance tasks such as oil reset, EPB, SAS, throttle relearn, ABS bleed, injector coding, fuel trim reset, and more.
Includes functions like power balance, crankshaft sensor relearn, zero-point calibration, and A/F reset.

Note: Functions vary by vehicle. Check compatibility before purchase.



5. Premium Hardware Upgrades:

9.7-inch display with Android 10.0 OS and Quad-Core 1.8 GHz CPU for smooth multitasking.
4 GB RAM + 128 GB ROM for faster performance.
Massive 6400mAh, 7.4V battery (equivalent to 12800mAh, 3.7V) with rapid charging.
Supports DoIP/CAN FD protocols for faster data transmission.
Includes 16 non-standard OBDII adapters for extensive vehicle compatibility.

6. Enhanced Wireless WiFi Connection:

Built-in WiFi for 20X faster and more stable communication compared to traditional BT scanners.
Connects directly to vehicles without additional WiFi networks.

Note: Internet connection required for software downloads.







7. 4000+ Bi-Directional Control Functions:

Verify system input/output with tests for radiator fans, A/C clutches, fuel pumps, lights, sound horns, and more.

Note: Functions vary by vehicle. Check compatibility before purchase.



8. Comprehensive Support & Updates:

3 years of free software updates to enhance features, expand vehicle coverage, and improve performance.



XTOOL KC501 Key & Chip Programmer:

XTOOL KC501 key programmer allows you to proceed with advanced key programming for higher-security vehicle brands like for Volvo, read/write infrared key for Mercedes-Benz, generate dealer keys; read and write MCU/EEPROM chips, read remote frequency, chip type, and key ID, write and backup the EEPROM chip inside the immobilizer module, etc.

PC Supported
MCU / EEPROM Chip Read / Write
ECU Read / Write
MC9S12 Encrypted Chip Read / Write
Key Reading / Writing
Mercedes Infrared Key Reading / Writing
Finding the Control Frequency
IC Card Reading / Writing

XTOOL KC501 works with D8/D8BT/D8W/D8S, D9/D9 PRO/D9S/D9SPRO, IP616, IP819,IP900/IP900S, IP919/IP919PRO, X100 PADS, X100PAD2, X100 PAD3/X100 PAD3 SE, IK618, A80/A80 PRO/A80 PRO MASTER, Work together with XTOOL Diagnostic Tool➤Note: It needs to work together with XTOOL Scanner.

XTOOL KC501 works with XTOOL KS-1 key programmer, can support for Toyota(94/98/88/A8/A9 chip)/Lexus/Scion All Smart Keys Lost. ➤Note: Not all vehicles that can be supported.

How to update the KC501 Key Programmer?

When the KC501 is connected to the XTOOL diagnostic equipment, the scan tool will automatically detect the KC501 software version. If it detects that it is not the latest version, it will automatically update and update to the latest version. Or you can connect KC501 to your PC with USB cable to automatically detect and update.





XTOOL KS-1 Key Programmer for Toyota

1. KS-1 For Toyota Smart Key All keys Lost
Allows you to generate a new key for Toyota(94/98/88/A8/A9 chip) in all key lost situations. Can reset by reinstalling the battery.
NOTE: KS-1 can NOT work on XTOOL Diagnostic Tools alone. Needs to be used with KC100 or KC501 key programmer. USing KS-1+KC100 Or KS-1+KC501 For Toyota/Lexus/Scion Smart Key All keys Lo*st.

2. Compatible List
XTOOL KS-1 needs to work with KC100/KC501 + XTOOL D8/D8BT/D8W/D8S, D9/D9 PRO/D9S/D9SPRO, IP616, IP819,IP900/IP900S, IP919/IP919PRO, X100 PADS, X100PAD2, X100 PAD3/X100 PAD3 SE, IK618, A80/A80 PRO/A80 PRO MASTER to play its role. It also can work together with XTOOL IK618, X100 PAD3, X100 MAX. Note: Not all vehicles can be supported.


Package List:

1 set x XTOOL D9S Pro
1 set x KS01 Smart Key Emulator

1 set x KC501