DONGGUAN LONROY EQUIPMENT CO LTD
| Payment Terms | L/C,D/A,D/P,T/T,Western Union |
| Supply Ability | 200 |
| Delivery Time | 5-8 work days |
| Packaging Details | wooden package |
| Product name | Single-fiber Static-Dynamic Friction Coefficient Measurement Device |
| Customization | Available |
| Warranty | 1 Year |
| Dimensions | 650W × 500D × 660mm |
| Weight | Approximately 50kg (including P/C data processing part) |
| Power supply | Single-phase AC 100V, 50/60Hz |
| Brand Name | Lonroy |
| Model Number | LR-A186 |
| Certification | ISO ASTM CE |
| Place of Origin | China |
View Detail Information
Explore similar products
JIS L1096 FZ/T 01076 Planar Pressurized Shrinkage Rate Testing Machine Flat
JIS K6545 ISO 20344 Vertical Low-temperature Cold-resistant Testing Machine ASTM
BS 22313 JIS L1059-1 ISO 2313 Monsanto 7 Station Fabric Wrinkle Recovery Tester
QB/T 2920 Suitcase Walking Vibration Testing Machine Travel Bags Walking
Product Specification
| Payment Terms | L/C,D/A,D/P,T/T,Western Union | Supply Ability | 200 |
| Delivery Time | 5-8 work days | Packaging Details | wooden package |
| Product name | Single-fiber Static-Dynamic Friction Coefficient Measurement Device | Customization | Available |
| Warranty | 1 Year | Dimensions | 650W × 500D × 660mm |
| Weight | Approximately 50kg (including P/C data processing part) | Power supply | Single-phase AC 100V, 50/60Hz |
| Brand Name | Lonroy | Model Number | LR-A186 |
| Certification | ISO ASTM CE | Place of Origin | China |
| High Light | JIS L1015 friction tester ，static dynamic friction measurement device ，textile fiber friction coefficient tester | ||
JIS L1015 L1095 Single Fiber Static Dynamic Friction Coefficient Measurement Device
Product Introduction
This machine is designed based on JIS L1015 (Chemical Fiber Needle Puncture Test Method (Test Method for Artificial Short Fibers)) and JIS L1095 (General Textile Test Method), and it is capable of accurately and efficiently measuring the friction coefficient.
Measurement features
Compared with testing machines that use torque balance/torsion balance as the testing principle, this one not only can obtain accurate data through extremely simple operation, but also can eliminate the influence of sample manufacturing and operator differences, and has excellent data reproducibility and repeatability. In addition, there is a data processing system specifically used for calculating indicators such as dynamic and static friction coefficients.
Compliant with standards
JIS L1015: Chemical Fiber Pin Test Method (Test Method for Artificial Short Fibers)
JIS L 1095: General Textile Testing Method
Test method
The friction resistance value is expressed with an accuracy of 0.1mg. A small amount of data is calculated based on the individual differences of the tested object.
Compared with the previous torque balance/torsion scale, the dedicated load measurement device with a maximum load of 100,000mg (commonly 100mg) has significant advantages in durability and reproducibility. Moreover, the "automatic 0" button operation is simpler.
The up and down movement of the load measurement part uses a special engine to achieve a very slow movement.
Technical specifications
|
Test item |
IT-FMT |
|
Surface treatment |
Fibers and yarns, dynamic and static friction between fibers |
|
Measurement range |
0.1 - 100.00 mg |
|
Representation method |
Digital method (display on panel and P/C monitor) |
|
Load measurement method |
Special dedicated load sensor method |
|
Sample load |
100 mg (clamp load) |
|
Friction body speed |
0 r.p.m. (0 mm/min.), 0.8 r.p.m. (20 mm/min.), 12 r.p.m. (300 mm/min.), 36 r.p.m. (900 mm/min.), 120 r.p.m. (3000 mm/min.), 180 r.p.m. (4500 mm/min.), 720 r.p.m. (18000 mm/min.) |
|
Friction body types |
Fibers, yarns, yarn rolls, yarn rollers |
|
Friction body rotation device |
Rollers X-Y with micro-motors |
|
Load measurement part movement |
Up and down movement (switch between micro-speed & medium-speed modes) / Remote control |
|
Test data items |
Actual test values (mg) of each sample for each test, friction coefficient, actual test value & friction coefficient /average, standard deviation, CV%, Max., Min. |
|
Size and weight |
650W × 500D × 660mm, approximately 50kg (including P/C data processing part) |
|
Power supply |
Single-phase AC 100V, 50/60Hz |
Company Details
Business Type:
Manufacturer,Seller,Exporter,Agent
Year Established:
2008
Total Annual:
$5 million -$8 million
Employee Number:
80~200
Ecer Certification：
Verified Supplier
Dongguan Lonroy Equipment Co., Ltd, located in Dongguan, Guangdong, is a leading company specializing in the research and development, manufacturing and sales of high-tech and high-precision testing equipment. With 20 years of industry experience, we are committed to providing excellent tes... Dongguan Lonroy Equipment Co., Ltd, located in Dongguan, Guangdong, is a leading company specializing in the research and development, manufacturing and sales of high-tech and high-precision testing equipment. With 20 years of industry experience, we are committed to providing excellent tes...
Get in touch with us
Leave a Message, we will call you back quickly!