DONGGUAN LONROY EQUIPMENT CO LTD
| Packaging Details | Wooden Package |
| Delivery Time | 5-8 work days |
| Supply Ability | 200 pieces |
| Power | AC220V±10% 50/60HZ |
| Volume timing accuracy | 0.001s |
| Outlet length | 8.000±0.025mm |
| Weight accuracy | ±0.5% |
| Standard | ASTM D1238 ISO 1133 |
| Payment Terms | L/C D/A D/P T/T Western Union |
| Model Number | LR-A001-B |
| Place of Origin | China |
| Brand Name | Lonroy |
| Certification | CE ISO ASTM |
View Detail Information
Explore similar products
ISO1133 Plastic Melt Flow Index Tester Machine MFR / MVR Tester For ABS PS PE
ISO1133 Melt Flow Index Tester Melt Flow Rate (MFR) Test
ISO 1133 Fully Automatic Melt Flow Index Tester MFI Test Equipment
Digital IZOD Charpy Impact Testing Machine ISO179 ASTM D256
Product Specification
| Packaging Details | Wooden Package | Delivery Time | 5-8 work days |
| Supply Ability | 200 pieces | Power | AC220V±10% 50/60HZ |
| Volume timing accuracy | 0.001s | Outlet length | 8.000±0.025mm |
| Weight accuracy | ±0.5% | Standard | ASTM D1238 ISO 1133 |
| Payment Terms | L/C D/A D/P T/T Western Union | Model Number | LR-A001-B |
| Place of Origin | China | Brand Name | Lonroy |
| Certification | CE ISO ASTM | ||
| High Light | melt flow index tester mfr ，mfr melt flow index instrument | ||
Touched Screen Melt Flow Index Tester MFR and MVR Method ASTM D1238
Used for testing all kinds of plastic, resin in the state of viscous flow through a certain temperature and load, every 10 min module and melt flow rate through the standard port MFR value, it is suitable for high temperature of polycarbonate, aromatic sulfone, fluorine plastic, nylon and other engineering plastics, can also be applied to polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, polyformaldehyde (POM), polycarbonate (PC) resin with lower melting temperature, such as plastic test, widely used in plastic production, plastic products, such as petroleum and chemical industry and related colleges and universities, scientific research units, and the commodity inspection department.
2.Standard
GB/T3682-2000 <Determination of melt flow rate and melt volume flow rate of thermoplastics>
ISO 1133:1997<Determination of melt flow rate and melt volume flow rate of thermoplastics>
ASTM D1238 <Standard Test Method for Determination of flow rate of Thermoplastic Melt by extruded plasticizer>
3.Test Methods:MFR+MVR Methods
4.Display mode: 7-inch touch screen controller
5.Product Character
1.English LCD Touched Screen.Ø
2.Hand and Automatic cutting material.
3.Double temperature control system, temperature control precision is more accurate, higher heating efficienc
4.Double imported sensors, more accurate temperature gradient from top to bottom, can be used independently, and improve the service life.
5. Cylinder for imports hartz alloying nitriding treatment, opening mould for carbon tungsten steel material, material reality.
6.Insulation barrels of sus304 stainless steel material for the whole, long-term high temperature does not rust.
7.Automatic calculation results, and print.
8.Have USB connector,can connect computer
6.Specification
| Model | LR-A001-B |
| Loading Barrel parameters | Inner hole Φ9.550±0.025mm |
| Cylinder diameter | Φ2.095±0.005mm
|
| Outlet length | 8.000±0.025mm |
| Temperature range | Room Temperature~450℃ |
| Temperature fluctuation | ±0.2 ℃ |
| Temperature uniformity | ±1℃ |
| Temperature display resolution | 0.1℃ |
| Display resolution | 0.1℃ |
| Time display resolution | 0.1s |
| 0.001mm
| |
| Volume timing accuracy | 0.001s
|
| Testing scope of mass method | 0.1-150g/10min
|
| Range of test results by volumetric method | 50-5000cm³/10min
|
| Weight parameters are as follows | |
| Weight accuracy | ±0.5% |
| Basic configuration
| A 0.325kg |
| B 1.2kg | |
| C 2.16kg | |
| D 3.8kg | |
| E 5kg | |
|
| |
| F 10kg | |
|
| |
| G 12.5kg | |
| H 21.6kg | |
|
| |
| Position detection | |
| Loop distance from up and down | 30mm |
| Control precision | ± 0.1mm |
| Test flow control | |
| Times of cutting the material | 0~10 times |
| Material cutting interval | 0~999s(set reference Table 2) |
| Control flow reaches the set temperature without volatility | |
| Barrel temperature time | 15 min |
| Material be installed | 1 min |
| Material sample temperature recovery time | 4 min |
| When binder set | 1min |
| Output mode | Micro-automatic print output |
| Cut material methods | Hand and Automatic Cut |
| Test load | Eight sets of weights |
| Power | AC220V±10% 50/60HZ |
7.Accessories List
| No | Name | Qty | Remark |
| 1 | Weight | 1 set | 0.325㎏,0.875㎏,1.835㎏,2.5㎏,2.915㎏,3.475㎏,4.615kg,5.0k g |
| 2 | Weight tray | 1pcs | Within level 1 load |
| 3 | Charging hopper | 1pcs |
|
| 4 | Mouth mold cleaning rod | 1pcs |
|
| 5 | Charging bar | 1pcs |
|
| 6 | Cylinder cleaning rod | 1pcs |
|
| 7 | piston rod | 1pcs |
|
| 8 | mouth mold | 1pcs |
|
| 9 | gauze | 2roll |
|
| 10 | Print paper | 2 roll |
|
8.Standard test force(8 level)
1 level:0.325 kg=(piston rod+weight tray+heat insulation cover+No 1 weight)=3.187N
2 level:1.200 kg=(0.325+No2 0.875 weight)=11.77 N
3 level:2.160 kg=(0.325+No3 1.835 Weight)=21.18 N
4 Level:3.800 kg=(0.325+No4 3.475Weight)=37.26 N
5 Level:5.000 kg=(0.325+No.5 4.675Weight)=49.03 N
6 Level:10.000 kg=(0.325+No.5 4.675weight+No.6 5.000Weight)=98.07 N
7 Level:12.000 kg=(0.325+No.5 4.675weight+No.6 5.000+No.7 2.500weight)=122.58 N
8 level:21.600 kg=(0.325+No.2 0.875weight+No3. 1.835+No.4
3.475+No.5 4.675+No.6 5.000+No.7 2.500+No.8 2.915weight)=211.82 N
Company Details
Business Type:
Manufacturer,Seller,Exporter,Agent
Year Established:
2008
Total Annual:
$5 million -$8 million
Employee Number:
80~200
Ecer Certification：
Verified Supplier
Dongguan Lonroy Equipment Co., Ltd, located in Dongguan, Guangdong, is a leading company specializing in the research and development, manufacturing and sales of high-tech and high-precision testing equipment. With 20 years of industry experience, we are committed to providing excellent tes... Dongguan Lonroy Equipment Co., Ltd, located in Dongguan, Guangdong, is a leading company specializing in the research and development, manufacturing and sales of high-tech and high-precision testing equipment. With 20 years of industry experience, we are committed to providing excellent tes...
Get in touch with us
Leave a Message, we will call you back quickly!