2.8 Inch 240x320 TFT LCD Display with MCU 8/16bit Interface and 262K Display

Product Specification

Full Color 2.8 Inch 240x320 Small TFT LCD Display RGB Screen IPS All Viewing

Product Details

Product Description

2.8-inch 240x320 full-color TFT LCD screen with RGB display and IPS technology is a type of display commonly used in small electronic devices.

Here is a detailed introduction to it:

Resolution: The resolution is 240×320, meaning there are 240 RGB pixels in the horizontal direction and 320 pixels in the vertical direction, with a pixel pitch of 0.18×0.18mm.

Interface type: Common interface types include SPI serial port, 8-bit or 16-bit MCU parallel port, etc. It can be easily connected to various main control chips or devices, facilitating system integration and development.

Brightness and contrast: The brightness is generally around 350cd/m², and some high-brightness versions can reach 1000cd/m². The contrast is usually 500:1 or higher, ensuring clear and vivid screen display.

Color depth: The color depth can reach 262K, capable of presenting rich colors and meeting general display requirements.

Operating temperature: The operating temperature range is typically -20℃ to +70℃, and the storage temperature range is -30℃ to +80℃, capable of adapting to certain environmental temperature changes.

IPS Full View Technology: By adopting IPS technology, the screen shows minimal color deviation when viewed from any angle, and the brightness and color performance are relatively consistent. Users can enjoy a better visual effect no matter from which direction they view the screen.

Accurate color reproduction: It has high light transmittance, no flickering, and can present rich, vivid, and realistic colors. The color reproduction is more accurate, providing users with a pleasant visual experience.

Application fields

Industrial control: It can be used in industrial automation equipment, instruments and meters, etc., to display information such as equipment operation status and parameter settings, facilitating operators to accurately read the information under different angles and lighting conditions.

Smart home: Such as smart door locks, control panels of smart appliances, etc., used to display operation menus, equipment status, etc., facilitating users to operate and view from different locations.

Consumer electronics: Commonly found in MP3 players, electronic dictionaries, portable game consoles, smart watches, etc., providing users with a better visual experience.

Medical equipment: Such as portable medical diagnostic equipment, medical monitors, etc., can clearly display patient data and images, etc.

FAQ:

1. I want the LCD display 8 digits and the outline size is 65x30x2.8mm………?

Answer: No problem. Firstly, please kindly send us your specification/ drawing paper 

If you have not the specification, you can also provide your samples; we will recommend the suitable one

 if it is standard products. Or we can customize for you based on your own requirement.

2.This LCD  is just what we want, but it is big size, do you have any smaller size? And the display content need to be changed a little.
      Answer: For the segment type LCD module, if you need modify the outline size or display content,

a new LCD glass module is need. We have to open new tooling for you.

3. This LCD display is HTN type, but I want STN type,can you make?
      Answer: That’s all right .  we can change for you as per you request.

4. I want customize a new LCD module. Can you do?
      Answer: Yes, we can. Please send your drawing paper. If you have not, please advise me the outline size  

of the LCD display, display information( Glass thickness, Polarizer, Display Type, Connector mode, 
Storage Temp. Operating Temp.  Supply Voltage, Viewing direction, drive condition), we can customize for you.

5. What is leading time for tooling?
      Answer: General speaking, it will cost 15 to 25 days  after drawing paper confirmation and tooling charge payment,

we can report you the exact time when you confirm the drawing paper.

6. Can you send us samples for checking?
     Answer: Yes,. Samples order is available.

7. What is the Leading Time?
    Answer: If we have stock for the standard ones, the leading time is one day after payment. If it is the mass production for 

special ones, the leading time is about 15-30 days. suppose we can finish earlier,  we will report the information in advanced.