UNIQUE AUTOMATION LIMITED
| Payment Terms | T/T |
| Supply Ability | 25 units per month |
| Delivery Time | 5-30 days |
| Packaging Details | vacuum packing for sea transportation |
| Product Name | Mini Wave Soldering Machine RF-3S |
| Machine Size | 3400*1100*1650（mm ) |
| Solder pot capacity (kg) | Approx. 325 kg |
| Preheating Area length (mm) | 1160 MM |
| Conveyor Width Adjust | Manual |
| Weight | 1010kg |
| Control | PLC + Control meter |
| Conveyor Height | About 760 MM |
| Brand Name | UA |
| Model Number | RF-3S |
| Certification | CE |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
Air Cylinder SMT Wave Soldering Machine 0.25MPa Spraying Pressure
BGA CSP Components SMT Wave Soldering Machine 3P AC380V
400mm PCB Lead Free Wave Solder Machine Upper Exhaust Auto Feed RF-400B
1600kg Lead Free Wave Soldering Machine 0.4MPa Spraying Pressure
Product Specification
| Payment Terms | T/T | Supply Ability | 25 units per month |
| Delivery Time | 5-30 days | Packaging Details | vacuum packing for sea transportation |
| Product Name | Mini Wave Soldering Machine RF-3S | Machine Size | 3400*1100*1650（mm ) |
| Solder pot capacity (kg) | Approx. 325 kg | Preheating Area length (mm) | 1160 MM |
| Conveyor Width Adjust | Manual | Weight | 1010kg |
| Control | PLC + Control meter | Conveyor Height | About 760 MM |
| Brand Name | UA | Model Number | RF-3S |
| Certification | CE | Place of Origin | CHINA |
| High Light | PLC Control Mini Wave Soldering Machine ，Lead Free Mini Wave Soldering Machine ，PLC lead free wave solder machine | ||
Lead Free Wave Soldering Machine for SMT Production Line
LED Production Line PCB Lead Free Mini Wave Soldering Machine RF-3S
Features of wave solder Equipment RF-3S
01. High temperature
The machine is easy to malfunction in the high temperature environment,thus affects the production. Manufacturers do not know the cause of thecase that is mechanical damage, only normal use, attention to maintenance and micro-repair, these mechanical failure control.
02. Voltage problem
After-sales service manufacturers often encounter customer response tomechanical failure, such as mechanical heating can not work, unable torotate control display instability. The causes of the above failures, in addition to a few poor quality, most of the voltage is not enough, capacityis not enough, line aging and lead to imbalance between circuits. If it isnot repaired in time, the machine will burn out.
03. Professional maintenance
Equipment professional electrical maintenance personnel, regular maintenance and repair of machinery. Can also be under the guidanceof manufacturers to do a good job in the daily maintenance and regularmaintenance of machinery.
Specification of wave solder Equipment RF-3S
| Model | RF-3S |
| Commom | |
| Power | AC 3Ф380V 50HZ/AC 3Ф220V 60HZ |
| Operation/ Startup Power | 6/28 KW |
| Dimension: L*W*H ( mm ) | 3400*1100*1650 |
| Weight | About 1000KG |
| Operating System | |
| Control Mode | PLC + Control Meter |
| Spraying System | |
| Transmission Method | Air Cylinder |
| Flux Flow | Throttle Valve |
| Auto Flux Feeding | Optional |
| Exhaust Method | Upper Exhaust |
| Exhaust Capacity | 25M3/min |
| Preheating System | |
| Preheating Model | IR Tube |
| No. of Preheating Zones | 1 |
| Preheating Length | 1150 MM |
| Preheating Temp. | Room Temperature : ~300C |
| Warm Time | Approx. 20/min |
| Conveyor System | |
| PCB Width ( L x W ) | 300 MM |
| Conveyor Direction | Optional |
| Conveyor Height | 750 MM |
| Componet Clearance (mm ) | 130 MM |
| Conveyor Width Adjustment | Manual |
| Conveyor Angle | 4 ~ 6 C |
| Soldering System | |
| Type of Solder Pot | Motor Drive |
| Material of Solder Pot | Stainless Steel |
| Wave Height Adjustment | Manual |
| Heater Power | 12 KW |
| Solder Pot Capacity | 320 KG |
| Warm-up Time | Approx. 180min |
| Temperature Control Mode | Thermostat |
Product Packing
RFQ of Mini Wave Welding Machine RF-3S
1. What is standard temperature setting for wave solder machine?
Leaded soldering: Preheating1: 100℃ / Preheating2: 110℃ / Preheating3: 120℃ / Solder pot: 245℃
Lead-free soldering: Preheating1: 100℃ / Preheating2: 110℃ / Preheating3: 120℃ / Solder pot: 265℃
2. How are can make maintenance for wave solder machine?
Everyday: Cleaning the sundries in the pre-heating zone and solder pot, and check deviation between setting temperature and the real-time temperature (once every hour) ; Inspect tin surface altitude, at circumstance do not turn on the wave crest, the normal tin’s height should be kept 3-5 mms apart from the solder-pool;
Every week: Periodically cleaning of heating parts, clean out the oxide in the spray nozzle;
Every three months: Check electric circuit and electric wire
Company Details
Business Type:
Manufacturer,Importer
Year Established:
2010
Total Annual:
800000-1400000
Employee Number:
70~100
Ecer Certification：
Verified Supplier
Unique Automation (referred to as "UA") is a High-speed developing enterprise of High Precision SMT Equipment manufacturer, which specializes in automation equipment for electronics industry. Basic Information : * Established Time : in 2010 with headquarter in... Unique Automation (referred to as "UA") is a High-speed developing enterprise of High Precision SMT Equipment manufacturer, which specializes in automation equipment for electronics industry. Basic Information : * Established Time : in 2010 with headquarter in...
Get in touch with us
Leave a Message, we will call you back quickly!