15.36kWh Residential LiFePO4 Battery Perfect Solution For Home Energy Storage

Product Details Product Name: Hive L50-3

Type: Lithium Iron Phosphate (LiFePO ₄) Battery

Installation method: wall mounted/floor standing

Rated capacity: 50Ah

Rated voltage: 51.2V

Energy storage capacity: 2.56kWh

Cycle life: ≥ 6000 cycles (@ 80% DOD, 25 ℃)

Communication interface: RS485 / CAN

Parallel Expansion: Supports parallel expansion of multiple battery groups

Protection level: IP65 (waterproof and dustproof, suitable for indoor and outdoor use)

Working temperature range:- 20℃ ~ 55℃

Size: 450mm × 540mm × 140mm (approximately)

Weight: ≈ The 27kg Hive L50-3 is suitable for home energy storage, off grid applications, small commercial energy storage, and backup power supply, helping to efficiently utilize clean energy!

Advantages and Characteristics

High safety: using lithium iron phosphate battery cells, safe and stable, with strong resistance to thermal runaway
Long lifespan: Cycle life ≥ 6000 times, ensuring long-lasting durability
Efficient energy management: intelligent BMS system, supporting real-time monitoring and optimization of battery status
Flexible installation: Supports wall mounted or floor standing installation, suitable for different home environments
IP65 protection level: waterproof and dustproof, suitable for various indoor and outdoor application scenarios
Strong compatibility: Supports RS485/CAN communication, compatible with mainstream inverter brands
Intelligent parallel connection: expandable to multiple battery packs to meet larger energy storage needs in various application fields
Home energy storage: In conjunction with photovoltaic systems, it increases the rate of self consumption and reduces electricity bills
Small commercial energy storage: providing backup power for small office buildings and shops to ensure the operation of critical loads
Off grid application: suitable for remote areas, outdoor facilities and other scenarios without grid access
Backup power supply: provides stable emergency power to prevent power outages from affecting daily life and work
Hive L50-3, Help you build efficient, safe, and intelligent home and small business energy storage systems!

Note: The range for stacking battery modules is from 1 to 6 modules.

Precautions

1. Temperature Management: The battery should only be charged between 0°C to 55°C and discharged between -20°C to 55°C. Exceeding these limits can lead to reduced performance or damage to the cells
2. Avoid Overloading: Ensure that the battery is not charged or discharged beyond its specified maximum current of 300A, as this can cause overheating or shorten the battery’s life
3. Environmental Considerations: Keep the battery in a non-condensing environment with humidity less than 95%. Avoid placing the battery in areas where condensation or excessive moisture could occur, as this may lead to corrosion or short circuits
4. Altitude Limit: Operate the battery only in locations where the altitude is below 4500 meters. At higher altitudes, performance may degrade due to lower air pressure affecting the cooling efficiency
5. Proper Ventilation: Although the battery uses free cooling, make sure it’s installed in a well-ventilated area to allow for adequate air circulation, preventing overheating
6. Storage Precautions: If the battery is not in use, store it in temperatures ranging from -20°C to 40°C to prevent cell degradation and ensure optimal performance upon reactivation
7. Handle with Care: With a weight of 149kg, ensure proper handling and installation procedures to avoid injury or damage to the battery. Using proper mounting brackets and securing the battery is crucial for safe installation
8. Protection Level: If using the standard IP20 version, avoid installing the battery in outdoor or overly dusty environments. For greater protection, opt for the IP65-rated version for semi-outdoor installations.