Shenzhen Merrytek Technology Co., Ltd.
| Payment Terms | T/T, Western Union |
| Supply Ability | 10,000pcs per Month |
| Delivery Time | within 5 working days for sample and small order; within 3-4 weeks for bulk order |
| Packaging Details | Packed in bubble bags firstly, amd then reinforced with carton for outer packing |
| Emergency power | 6W |
| Emergency time | 1.5 hours |
| Battery | Ni-Cd: 6.4V 6V 2000mAh |
| Load output voltage | 20-90Vdc |
| Brand Name | Kreat Power |
| Model Number | KE003-06M090NE |
| Certification | CE |
| Place of Origin | China |
View Detail Information
Explore similar products
3W 3HOURS LED Emergency Pack With External LifePO4 Battery For 3 Years Warranty
6.4V 1800mAh Constant Power 3W Auto-test Emergency Packs With Battery Lifepo4
3.7V 2600mAh manual test constant Power 3W Emergency Drivers with built-in
LifePO4 6.4V 1800mAh built-in battery electronic led converter for LED panel or
Product Specification
| Payment Terms | T/T, Western Union | Supply Ability | 10,000pcs per Month |
| Delivery Time | within 5 working days for sample and small order; within 3-4 weeks for bulk order | Packaging Details | Packed in bubble bags firstly, amd then reinforced with carton for outer packing |
| Emergency power | 6W | Emergency time | 1.5 hours |
| Battery | Ni-Cd: 6.4V 6V 2000mAh | Load output voltage | 20-90Vdc |
| Brand Name | Kreat Power | Model Number | KE003-06M090NE |
| Certification | CE | Place of Origin | China |
| High Light | dimmable led driver ，led emergency backup driver ，6W LED Emergency Driver | ||
LED Emergency Driver Power 6W Emergency Time 1.5h & External NiCd Battery KE003-06M090NE
1. Features
--Economical constant power output LED emergency power supply,wide output voltage range.
--Multiple protection function: short-circuit protection, battery over charge and deep discharge protection.
2. Parameters
| Charge Part | Rated input voltage | 220-240Vac 50Hz /60Hz |
| Rated input current | 0.06A Max.@230Vac | |
| Battery charging current | 240mA | |
| Battery charging time | 24 hours | |
| Emergency Part | Operating mode | Emergency |
| Load type | LED | |
| Emergency power | 6W | |
| Emergency time | 1.5hours | |
| Load output voltage | 20-90VDC | |
| Battery | Type | Ni-Cd: 6.4V 6V 2000mAh |
| Exception Driver Requirements | Input current | 1 A Max. |
| Output current | 2A Max. | |
| LED Indication | Charging | The green light turns on |
| Fault | The green light switches off | |
| Emergency Function Test | Manual test | Yes |
| Abnormal Protection Requirements | Battery over-charge/deep discharge protection | Yes |
| Output over-voltage protection | Yes | |
| Output overload protection | Yes | |
| Output short circuit protection | Yes | |
| Operating Environment | Operating temperature/humidity | 0℃~50℃ |
| Storage temperature/humidity | -20℃~40℃ humidity: 20%-60%(without condensation) | |
| Case Max. Temp(Tc) | 85℃ | |
| Safety & EMC
| Withstand voltage | 3750Vac 5mA 60S(Input “L N” – output “SEC+ SEC-) |
| Safety standard | EN61347-1, EN61347-2-7 | |
| EMC standard | EN55015, EN61547,EN61000-3-2, EN61000-3-3 | |
| Environmental protection requirements | Compliant to RoHS | |
| Certification | CE | |
| Others | Input/output(terminal/wiring) specification | Press terminal, wire diameter: 0.5-0.75mm2 |
| IP rating | IP20 | |
| Type of protection | Class 2 | |
| Installation type | Built-in installation | |
| Installation dimension | 146*30*22.5mm | |
| Packaging requirement | Bubble bag+ clapboard +outer carton(K=A) | |
| Weight | 60g( the driver), 256g( the battery) | |
| Lifespan | Emergency driver 30000h @Ta full load (Driver) | |
| Notes: All parameters are tested on the input voltage 230Vac,environment temperature 25℃,unless otherwise specified. | ||
3. Dimension (Unit:mm)
The driver
The battery
4. Wiring Diagram
Connect to external drive mode:
5. Wire Preparation
1)Solid or Stranded wire type 0.5 - 0.75mm2
2)To make or release the wire from the terminal, use a screwdriver to push down the button.
6. Label
7. Battery Application Notice
1) The battery should be recharged and discharged semiannually in normal use conditions.
2) Do not connect to the circuit when the battery is not use to prevent over-discharge of the battery due to self-consumption of the circuit board.
3) Please keep the battery from the heat source when installing and using, and only be allowed to use in certain working temperature range.
4) The battery should be stored in a cool and dry environment.
5) After long time storage, the battery is cycled every 6 months as required.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Employee Number:
200~300
Ecer Certification：
Verified Supplier
Focus on intelligent lighting control and innovate constantly！ About Merrytek Shenzhen Merrytek Technology Co. Ltd, founded in 2011 in Shenzhen China. For more than 13 years, we have been dedicated to research electronical products for professional lighting & smart co... Focus on intelligent lighting control and innovate constantly！ About Merrytek Shenzhen Merrytek Technology Co. Ltd, founded in 2011 in Shenzhen China. For more than 13 years, we have been dedicated to research electronical products for professional lighting & smart co...
Get in touch with us
Leave a Message, we will call you back quickly!