Ecer asks for your consent to use your personal data to:
Personalised advertising and content, advertising and content measurement, audience research and services development
Store and/or access information on a device
Your personal data will be processed and information from your device (cookies, unique identifiers, and other device data) may be stored by, accessed by and shared with 135 TCF vendor(s) and 65 ad partner(s), or used specifically by this site or app.
Some vendors may process your personal data on the basis of legitimate interest, which you can object to by do not consent. Contact our platform customer service, you can also withdraw your consent.
12Vdc Input, suitable for DC systems or LED driver with 12V DC 100mA auxiliary power output.
0--10V dimming terminal, 3-step or 2-step is optional, detection area adjustable
Mini size MW motion detection sensor
Indoor maximum mounting height is 6m
All sensor parameters can be set by Casambi App setting
【Parameters】
Input
Rated voltage
12±1VDC
7.5--13VDC
Working current
32±5mA
32±5mA
Ripple voltage
< 100mVp-p
Output
Output signal
○0-10V Dimming Signal
○PWM Dimming Signal
Sensing parameters
Working frequency
5.8GHz ±75MHz, ISM band
Transmit power
1mW Max.
Sensor sensitivity
Casambi App setting
Daylight Priority
Casambi App setting
Stand-by dim level
Casambi App setting
Detection range (radius)
Ceiling Mounting(height: 3m): 0.3m/s ≥3m, 1m/s ≥2.5m Wall Mounting(height: 2m): 0.3m/s ≥5m, 1m/s ≥3m Test conditions : the product is set to 100% sensitivity , and there is no obvious occlusion in the room of 60㎡
Installation height
3m ( 6m Max )
Wireless Module
BLE Module
Casambi Bluetooth
Working frequency
2.402-2.480GHz
Transmitting power
+7dBm(max)
Transmission distance
25m(Visible distance)
Environment
Working temperature
Built-in: -35~60℃
Storage temperature
-40℃~80℃, humidity ≤85% (non-condensing)
Certification Standards
Certified
CE
Environmental requirements
Comply with RoHS 2.0 , Reach requirements
Degree of protection
IP20
Other
Wiring
3pin 2.0mm terminal
Installation requirements
built-in installation
Packaging requirements
Clapboard + paper carton(K=A)
Net weight
25.5±3g
Life
5 Years Warranty@Ta
【Function description】
√ON-OFF function
Casambi App setting
√2-step dimming
Casambi App setting
√3-step dimming
Casambi App setting
√Daylight harvesting
Casambi App setting
√Daylight priority
Casambi App setting
√Grouping
Casambi App setting
【Diagram】
Dimension
Screw installation Clasp structure installation
Wiring, Function
Installation
Radiation Diagram
【Initialization】
When powering on for the first time, the sensor will turn the light on to 100% brightness, and the light will be turned off after 10 seconds. During initialization, movement signal will not be detected.
【Default setting】
Detection area: 100%; Hold Time: 5s; Stand-by Period: 0s; Daylight Sensor: Disable; Stand-by Dim Level: 10%.
【Application Notice】
The sensor should be installed by a professional electrician. Please cut off the power before installing, wiring etc.
The detection distance is related to factors such as the moving speed of the moving object, the size of the moving object, the installation height, the installation angle, whether the installation environment is open, and the material of the reflector. The detection distance given in the specification is a typical value, which is 165cm/65kg tester, and it is tested in an open indoor environment
When the microwave sensor is installed on the wall, the detection distance will be greatly increased compared with that installed on the ceiling. If you use the wall installation method, please reduce the sensitivity to use or contact our company to confirm the use settings. The light sensitivity threshold is in a sunny environment, no shadows, and ambient light diffuse reflection conditions. In different time periods, climates, and environments, the illuminance value detected by the light sensor may be different
Sensor parameters may need to be reconfigured in different installation environments, please refer to the following instructions or contact the manufacturer
This sensor is only for indoor use, outdoor wind and rain, and surrounding moving objects will cause false triggering
The installation height of the sensor product cannot exceed 6 meters, and the optimal height is 3 meters; the distance between the two sensors should be greater than 3 meters
When the sensor is installed in a metal lamp, on a metal reflective surface, or in a narrow closed environment, microwaves will be reflected multiple times and cause false triggering. Please reduce the sensor sensitivity or contact the manufacturer for technical support.
Please make sure that there are no moving signals such as fans, DC motors, sewer pipes, air outlets, etc. around the sensor, otherwise the sensor may cause false triggering.
Microwaves cannot penetrate metal, avoid installing in closed or semi-closed metal lamps, and there should be no metal or glass blocking the product
Sensor with different 0-10V / PWM driver, LOW light effect may be different
DC regulated power supply with stable output voltage and LOW ripple coefficient must be used. The ripple of the power supply should be less than 100mV ; the load current should be greater than 100 mA
Product specifications and parameters may be optimized without prior notice
For the new installation environment, it is recommended to test 5pcs samples before installation.
Company Details
Bronze Gleitlager
,
Bronze Sleeve Bushings
and
Graphite Plugged Bushings
from Quality China Factory
Business Type:
Manufacturer,Exporter,Seller
Employee Number:
200~300
Ecer Certification：
Verified Supplier
Focus on intelligent lighting control and innovate constantly！
About Merrytek
Shenzhen Merrytek Technology Co. Ltd, founded in 2011 in Shenzhen China. For more than 13 years, we have been dedicated to research electronical products for professional lighting & smart co... Focus on intelligent lighting control and innovate constantly！
About Merrytek
Shenzhen Merrytek Technology Co. Ltd, founded in 2011 in Shenzhen China. For more than 13 years, we have been dedicated to research electronical products for professional lighting & smart co...
