Luoyang Zhongtai Industries CO.,LTD
| Payment Terms | L/C, T/T |
| Supply Ability | 3000 Set/Sets per Year |
| Condition | New |
| Type | LXM Serise Roller Mill |
| Product moisture | ≤1 % |
| Application | Barite, calcite, limestone, kaolin, bentonite, marble |
| Mill in diameter | 820-2300 mm |
| Features | Small noise, small vibration |
| Warranty | 12 months |
| Classification | Ore Grinding Mill |
| Brand Name | ZTIC |
| Model Number | Ore Grinding Mill |
| Certification | IOS |
| Place of Origin | Henan,China |
View Detail Information
Explore similar products
Simple Installation Sand Making Mining Ball Mill And Ore Grinding Mill
Heavy Duty 165 Units HPGR High Pressure Grinding Rolls and roller mill
High Pressure Shaft Flexible 315 T Roller Mill and roller press
Cement Plant AC Motor and Slag Vertical Mill with capacity 1000tpd
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 3000 Set/Sets per Year |
| Condition | New | Type | LXM Serise Roller Mill |
| Product moisture | ≤1 % | Application | Barite, calcite, limestone, kaolin, bentonite, marble |
| Mill in diameter | 820-2300 mm | Features | Small noise, small vibration |
| Warranty | 12 months | Classification | Ore Grinding Mill |
| Brand Name | ZTIC | Model Number | Ore Grinding Mill |
| Certification | IOS | Place of Origin | Henan,China |
| High Light | Mining Centrifugal Superfine Mill ，LXM Centrifugal Superfine Mill ，LXM superfine grinding mill | ||
LXM Serise Centrifugal Superfine Mill Of Ore Grinding Mill For Mining
1. Introduction of centrifugal superfine mill of Ore Grinding Mill
Centrifugal superfine mill (superfine mill for short) is a new generation of superfine mill equipment developed by our factory on the basis of advanced powder making equipment at home and abroad. Can replace Raymond mill, smooth production of ultrafine powder, fineness can be adjusted between 80 mesh -1500 mesh.
3. Application of High fine mill roller mill
High fine mill suitable for barite, calcite, potassium feldspar, talc, marble, dolomite, fluorite, lime, activated clay, activated carbon, bentonite, kaolin, cement, phosphate rock, gypsum, glass, manganese ore, titanium ore, copper ore, chrome ore and other minerals, refractories, coal powder, carbon black, clay, bone powder, titanium dioxide, iron oxide, such as quartz, urea Morse hard The degree is not more than 7, humidity below 6% of non-flammable and explosive minerals, chemical building materials and other industries more than 300 kinds of materials.
3. Characteristics of centrifugal superfine mill of Ore Grinding Mill
(1) Small noise, small vibration;
(2) high pressure, much fine powder;
(3) Uniform wear of ring and roller, long service life, 3-5 times of ordinary Raymond mill;
(4) Suitable for hard material processing;
(5) The iron content of micro powder is low;
(6) Can operate continuously, during the operation does not affect the roller bearing room oil filling;
(7) Small power consumption, high efficiency, convenient installation and maintenance;
(8) There is no scraper feeding in the mill, and the failure rate is low.
4. Technical parameters of centrifugal superfine mill:
| Technical parameters/Model | LXM820 | LXM1120 | LXM1300 | LXM1550 | LXM1700 | LXM1900 | LXM2200 | LXM2300 |
| Mill in diameter (mm) | 820 | 1120 | 1300 | 1550 | 1700 | 1900 | 2200 | 2300 |
| Production capacity(t/h) | 1~5 | 6~10 | 16~20 | 22~28 | 30~38 | 36~43 | 70~90 | 95~115 |
| Particle size of grinding material (mm) | 0~25 | 0~30 | 0~35 | 0~45 | 0~50 | 0~55 | 0~60 | 0~65 |
| product moisture(%) | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
| Main motor power(kw) | 55 | 110 | 220 | 315 | 400 | 500 | 710 | 800 |
| Device weight(t) | 16 | 27 | 45 | 75 | 90 | 115 | 160 |
5. Technical parameters of high fine mill
| Type | -18 | -21 | -26 | -27 | -30 |
| Feed size(mm) | 8-15 | 8-15 | 10-15 | 15-20 | 15-25 |
| Finished size(mm) | 0.04-0.02 (400-600 mesh) | 0.04-0.02 (400-600 mesh) | 0.04-0.02 (400-600 mesh) | 0.04-0.02 (400-600 mesh) | 0.04-0.02 (400-600 mesh) |
| Center shaft speed (rev/min) | 300 | 190 | 180 | 170 | 150 |
| Motor power(kw) | 24-29 | 32.2 | 35.7-38 | 40-42.5 | 57.5-59.5 |
Company Details
Business Type:
Manufacturer
Year Established:
1981
Total Annual:
80 million-100 million
Employee Number:
500~1000
Ecer Certification：
Verified Supplier
Luoyang Zhongtai Industries Co., Ltd. The company was founded in 1981 and finished joint stock reform in 2005. There are eight subsidiaries and it's an independent legal entity with the qualifications of operating import & export trade. With a garden-like industrial park and modern st... Luoyang Zhongtai Industries Co., Ltd. The company was founded in 1981 and finished joint stock reform in 2005. There are eight subsidiaries and it's an independent legal entity with the qualifications of operating import & export trade. With a garden-like industrial park and modern st...
Get in touch with us
Leave a Message, we will call you back quickly!